Akrapovic Evolution Line Titanium Exhaust for Porsche Cayenne (9YA) V6 3.0ltr 2019>> - S-PO
Code: S-PO/TI/11H
Fits:
Porsche (9YA) Cayenne / Coupé V6 3.0ltr- OPF/GPF 2019 - 2020
Porsche (9YA) Cayenne E-Hybrid / Coupé V6 3.0ltr - OPF/GPF 2019 - 2020
This exhaust is constructed from high-grade lightweight titanium and features a central muffler that expands to produce two sets of tailpipes, with a choice of either a titanium or carbon-fibre finish designed to complement the lines of the car. Two valves on either side of the muffler control the airflow and are contained in valve housings cast in the Akrapovič in-house foundry. Fully ECE type approved, the Evolution Line (Titanium) will reduce overall vehicle weight while delivering extra power and torque through the whole rev range. With a specially developed and tuned sound, the system delivers a very high-frequency and sporty tone, especially when the car is in the higher rev range. In the normal mode, the sound is quiet and ideal for town driving and cruising, but it still has the unmistakable Akrapovič feel. Installation is plug&play, with no need to remap the ECU.
*** Mandatory Extra Part Required ***
Tail pipe set (Titanium) - Product Code: TP-T/S/23
or
Tail pipe set (Carbon) - Product Code: TP-CT/53
An optional Akrapovič Sound Kit is available, which will increase the aural pleasure at lower revs and further supplement the sound as the revs rise, adding a thrill to the launch of the car from a standstill. With the use of the optional Akrapovič Sound Kit, the ECE type approval is no longer valid.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
PAB253609
PAB253609E
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche Cayenne V6 3.0L Petrol 340Hp
- Porsche Cayenne Coupe V6 3.0L Petrol 340Hp
- Porsche Cayenne E-Hybrid V6 3.0L V6 340Hp
- Porsche Cayenne Coupe E-Hybrid V6 3.0L 340Hp
£5,742.00 inc. VAT
Now £5,627.16 inc. VAT
Orderable 
Related products
Sports exhaust silencers Porsche 970 Panamera S and GTS
Code: TSPOPAN09.803.A
Sports exhaust silencers.
With electronic exhaust valve
Fits:
Porsche Panamera 970.1 S and GTS - 2010-2013
Porsche Panamera 970.2 GTS 2013-2016
This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 60
This is the diameter of the main pipe of the exhaust system
With electronic exhaust valve
Fits:
Porsche Panamera 970.1 S and GTS - 2010-2013
Porsche Panamera 970.2 GTS 2013-2016
This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 60
This is the diameter of the main pipe of the exhaust system
Product Vehicle Group
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera GTS V8 4.8L 4WD (440Hp)
£3,015.39 inc. VAT
Now £2,955.08 inc. VAT
Orderable
Sports exhaust loud silencers Porsche 970 Panamera turbo and S
Code: TSPOPAN09.003.AN
Sports exhaust loud silencers.
Loud version without exhaust valve
Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)
This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
Loud version without exhaust valve
Fits:
Porsche 970.1 and 970.2 Panamera turbo and turbo S (2010-2016)
This exhaust system is not street legal. These mufflers can be fitted both on 2WD and 4WD modelsThe component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip
END TIPS DIMENSION - 90mm
The value refers to the external dimensions of the exhaust end tip
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible
Product Vehicle Group
- Porsche Panamera Turbo V8 4.8L
- Porsche Panamera Turbo S V8 4.8L
- Porsche Panamera Turbo V8 4.8L (520Hp)
- Porsche Panamera Turbo V8 Executive
£2,638.47 inc. VAT
Now £2,585.70 inc. VAT
Orderable
