Please wait…

Please wait while we process your order,
do not press the back button…

bracket Genuine Porsche part 93011115402

Code: 93011115402

Genuine Porsche part

bracket

The product code 93011115402 was also found on these diagrams

202-10 - bracket

Fuel System, Exhaust System 911 & 912 (1965-1989)

exhaust system 911 TURBO 930.60/66 1978-83

202-00 - bracket for air conditioner

exhaust system 911 TURBO 1975-77

Additional information:

• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.

Before purchasing thoroughly check part to confirm compatibility.

Related products

Exhaust gasket heat exchangers to crossover or pre-silencer. Porsche 911 / 930 / 965 / 993

93011119206/1

Product Information

Exhaust Gasket Heat Exchangers To Crossover Or Pre-silencer.

The OE MATCH Exhaust Gasket – Heat Exchangers to Crossover or Pre-Silencer is a high-quality replacement sealing gasket designed to create a gas-tight connection between the exhaust heat exchangers and the crossover pipe or pre-silencer assembly. Engineered to OE specifications, this gasket helps prevent exhaust gas leaks while maintaining proper exhaust flow, system efficiency, and engine performance.
Sold Each.

Fits:

Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC
Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50
Porsche 911 1975-1977 3.0L Turbo (930)
Porsche 911 1978-1989 3.3L Turbo (930)
Porsche 964 (911) TURBO 3.3L 1991-93
Porsche 964 (911) TURBO 3.6L 1991-93
Porsche 993 (911) C2 1994-97
Porsche 993 (911) C4 1994-97
Porsche 993 (911) RS 1994-97
Porsche 993 (911) C2S 1994-97
Porsche 993 (911) C4S 1994-97
Porsche 993 (911) TURBO 1994-96
Porsche 993 (911) GT2 1994-97
Porsche 993 (911) TURBO S 1994-97

Diagram Ref No 6

Operating in an extremely high-temperature environment, the gasket is manufactured from durable heat-resistant materials capable of withstanding continuous thermal cycling and exhaust system pressures. It is an essential component whenever exhaust system sections are removed, repaired, or replaced.

What This Product Does:

Creates a gas-tight seal between exhaust components
Prevents exhaust gas leaks at the heat exchanger connection
Maintains proper exhaust flow and backpressure
Supports engine performance and efficiency
Reduces exhaust noise caused by leaking joints
Withstands high exhaust temperatures and thermal cycling

Symptoms Of Wear Or Failure:

Exhaust blowing or ticking noises from the engine area
Visible exhaust gas leaks around gasket joints
Exhaust fumes or smells entering the cabin
Reduced engine efficiency or performance
Soot or carbon deposits around the exhaust flange
Increased exhaust noise levels
Failed emissions inspections in severe cases
Difficulty maintaining a proper exhaust system seal after repairs

Why Replacement Matters:

Restores a proper gas-tight exhaust seal
Prevents exhaust leaks and unwanted noise
Maintains correct exhaust flow characteristics
Helps preserve engine performance and efficiency
Reduces the risk of exhaust fumes entering the cabin
Protects surrounding components from hot exhaust gases
Supports emissions system performance and compliance
Ensures reliable long-term operation of the exhaust system

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93011119206

93011119206

93011119203

93011119204

1621101000

93011119201

The product you are viewing cross references to these numbers

Exhaust gasket heat exchanger to cylinder head. Porsche 911 1965-83

93011119113/1

Product Information

Exhaust Gasket Heat Exchanger To Cylinder Head.

The OE MATCH Exhaust Gasket – Heat Exchanger to Cylinder Head is a high-quality replacement sealing gasket designed to create a secure, gas-tight connection between the exhaust heat exchanger and the cylinder head. This critical gasket prevents exhaust gases from escaping at the exhaust port while maintaining proper exhaust flow, engine efficiency, and emissions performance.
Sold Each.

Fits:

Porsche 911 1965-1968 2.0L / 912 SWB (F)
Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC

Diagram Ref No 14

Manufactured to OE specifications from heat-resistant materials, the gasket is engineered to withstand the extreme temperatures, pressure fluctuations, and thermal cycling found within the exhaust system. It is an essential component whenever exhaust heat exchangers, manifolds, or cylinder head exhaust connections are serviced or rebuilt.

What This Product Does:

Creates a gas-tight seal between the heat exchanger and cylinder head
Prevents exhaust gas leaks at the exhaust port
Maintains proper exhaust flow and system efficiency
Supports engine performance and combustion efficiency
Reduces exhaust noise caused by leaking exhaust joints
Withstands high temperatures and exhaust system pressures

Symptoms Of Wear Or Failure:

Creates a gas-tight seal between the heat exchanger and cylinder head
Prevents exhaust gas leaks at the exhaust port
Maintains proper exhaust flow and system efficiency
Supports engine performance and combustion efficiency
Reduces exhaust noise caused by leaking exhaust joints
Withstands high temperatures and exhaust system pressures

Why Replacement Matters:

Restores a reliable gas-tight seal at the cylinder head
Prevents exhaust leaks and associated noise
Maintains proper exhaust flow characteristics
Supports engine efficiency and performance
Reduces the risk of exhaust fumes entering the cabin
Protects nearby components from hot exhaust gas exposure
Helps maintain emissions system effectiveness
Ensures long-term reliability of the exhaust system and cylinder head connection

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93011119113

93011119113

The product you are viewing cross references to these numbers

Exhaust Gasket Kit Porsche 911 1975 - 1983

GASKETKIT01

Product Information

Exhaust Gasket Kit

Restore proper exhaust sealing and eliminate unwanted exhaust leaks with this comprehensive Exhaust Gasket Kit for Porsche 911 models produced between 1975 and 1983. Designed for air-cooled Porsche engines, this complete kit contains all the key gaskets required when servicing, rebuilding or replacing exhaust system components.

Fits:

Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC

These gaskets create critical gas-tight seals between exhaust components, preventing exhaust gases from escaping before reaching the silencer system. Proper sealing helps maintain engine efficiency, exhaust performance and correct operation of the entire exhaust system.

The kit includes:

6 x Heat Exchanger to Cylinder Head Gaskets
2 x Heat Exchanger Cross Pipe / Pre-Silencer Gaskets
2 x Pre-Silencer to Rear Silencer Gaskets

Whether carrying out an exhaust repair, heat exchanger replacement or full restoration project, replacing old exhaust gaskets is essential to ensure long-term reliability and optimum performance.

What Does an Exhaust Gasket Kit Do?

Exhaust gaskets are designed to seal the connections between exhaust system components, preventing exhaust gases from escaping under pressure.

A properly functioning gasket system helps provide:

Leak-free exhaust operation
Correct exhaust gas flow
Reduced exhaust noise
Improved engine efficiency
Proper back pressure characteristics
Reduced risk of exhaust fumes entering the cabin
Reliable long-term exhaust performance

Because exhaust systems operate under extreme heat and pressure, gasket condition is critical to maintaining proper sealing.

Symptoms of Exhaust Gasket Wear or Failure

Exhaust gaskets are constantly exposed to thermal cycling, vibration and corrosive exhaust gases. Over time they can deteriorate, compress, crack or fail.

Common symptoms include:

Exhaust blowing noises
Ticking or tapping sounds on start-up
Increased exhaust noise
Exhaust fumes around the engine bay
Reduced engine performance
Soot deposits around exhaust joints
Exhaust smell entering the cabin
Visible gasket deterioration during inspection
Poor sealing after exhaust system removal

In many cases, exhaust leaks become progressively worse if damaged gaskets are not replaced.

Why Replacement Matters

Replacing exhaust gaskets whenever exhaust components are removed is considered best practice maintenance.

Benefits include:

Restores leak-free exhaust operation
Eliminates exhaust gas leaks
Improves engine efficiency
Reduces unwanted exhaust noise
Protects surrounding engine components
Helps maintain correct exhaust flow characteristics
Supports safe vehicle operation
Improves reliability of exhaust repairs

For classic air-cooled Porsche 911 models, maintaining a properly sealed exhaust system is essential for both performance and driving enjoyment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

GASKETKIT01

93011119113

93011119308

93011119206

91111119102

The product you are viewing cross references to these numbers

Exhaust Gasket Kit Porsche 911 1984-89

GASKETKIT02

Product Information

Exhaust Gasket Kit

Restore proper exhaust sealing and eliminate unwanted exhaust leaks with this comprehensive Exhaust Gasket Kit for Porsche 911 3.2 Carrera models produced between 1984 and 1989. Designed for air-cooled Porsche engines, this complete kit contains all the key gaskets required when servicing, rebuilding or replacing exhaust system components.

Fits:

Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50

The kit includes:

6 x Heat Exchanger to Cylinder Head Gaskets
2 x Heat Exchanger Cross Pipe / Pre-Silencer Gaskets
2 x Pre-Silencer to Rear Silencer Gaskets

Whether carrying out an exhaust repair, heat exchanger replacement or full restoration project, replacing old exhaust gaskets is essential to ensure long-term reliability and optimum performance.

What Does an Exhaust Gasket Kit Do?

Exhaust gaskets are designed to seal the connections between exhaust system components, preventing exhaust gases from escaping under pressure.

A properly functioning gasket system helps provide:

Leak-free exhaust operation Correct exhaust gas flow
Reduced exhaust noise
Improved engine efficiency
Proper back pressure characteristics
Reduced risk of exhaust fumes entering the cabin
Reliable long-term exhaust performance

Because exhaust systems operate under extreme heat and pressure, gasket condition is critical to maintaining proper sealing.

Symptoms of Exhaust Gasket Wear or Failure

Exhaust gaskets are constantly exposed to thermal cycling, vibration and corrosive exhaust gases. Over time they can deteriorate, compress, crack or fail.

Common symptoms include:

Exhaust blowing noises
Ticking or tapping sounds on start-up
Increased exhaust noise
Exhaust fumes around the engine bay
Reduced engine performance
Soot deposits around exhaust joints
Exhaust smell entering the cabin
Visible gasket deterioration during inspection
Poor sealing after exhaust system removal

In many cases, exhaust leaks become progressively worse if damaged gaskets are not replaced.

Why Replacement Matters

Replacing exhaust gaskets whenever exhaust components are removed is considered best practice maintenance.

Benefits include:

Restores leak-free exhaust operation
Eliminates exhaust gas leaks
Improves engine efficiency
Reduces unwanted exhaust noise
Protects surrounding engine components
Helps maintain correct exhaust flow characteristics
Supports safe vehicle operation
Improves reliability of exhaust repairs

For classic air-cooled Porsche 911 models, maintaining a properly sealed exhaust system is essential for both performance and driving enjoyment.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

GASKETKIT02

93011119308

93011119206

91111119102

93011119112

The product you are viewing cross references to these numbers

Exhaust gasket heat exchanger manifold. Porsche 911 1984-89

93011119112/1

Product Information

Exhaust Gasket Heat Exchanger Manifold.

The OE MATCH Exhaust Gasket Heat Exchanger Manifold is a high-quality replacement sealing gasket designed to create a secure, gas-tight connection between the exhaust manifold and heat exchanger assembly. Engineered to OE specifications, this gasket prevents exhaust gas leaks while maintaining correct exhaust flow, engine efficiency, and exhaust system performance.
Sold Each.

Fits:

Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50

Diagram Ref No 2

Manufactured from durable, heat-resistant materials, the gasket is designed to withstand extreme exhaust temperatures, pressure fluctuations, and constant thermal cycling. It is an essential component whenever exhaust manifolds, heat exchangers, or related exhaust system components are removed, serviced, or replaced.

What This Product Does: