Original Porsche Part Genuine Porsche part 95890608810

Pressure sensor.



Fits:
Porsche 95B.1 Macan S Diesel 3.0L 2014-18
Porsche 958 Cayenne S 4.2L V8  2011-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958906051

The product you are viewing cross references to these numbers

Pressure sensor.



Fits:
Porsche 95B.1 Macan S Diesel 3.0L 2014-18
Porsche 958 Cayenne S 4.2L V8  2011-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958906051

The product you are viewing cross references to these numbers

Intake manifold pressure sensor.



Fits:
Porsche 95B.1 Macan 2.0L 2014-18

Click 'Zoom in' for large parts diagram.
Diagram ref no 16



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95890605100

The product you are viewing cross references to these numbers

Fuel Injector – Direct Injection Replacement
Sold each - required per car  

These fuel injectors are designed for the Porsche 95B.1 Macan 2.0ltr engine, providing precise fuel delivery for optimal combustion, performance and efficiency.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18

Diagram Ref No 1  

The Macan 2.0 uses a direct injection system, where fuel is injected at high pressure directly into the combustion chamber. Accurate injector performance is essential for smooth running, power output and emissions control.

What Fuel Injectors Do

Fuel injectors are responsible for:
• Delivering the correct amount of fuel into each cylinder
• Atomising fuel for efficient combustion
• Supporting smooth idle and acceleration
• Maintaining power, fuel economy and emissions compliance

In direct injection engines like the Macan 2.0 TFSI, injectors operate under extremely high pressure and must maintain precise spray patterns.

Why Fuel Injectors Fail

Over time, Porsche Macan 2.0 injectors can develop issues due to:

Carbon build-up
Direct injection engines are prone to carbon deposits, which can affect injector spray patterns and flow.

Internal wear
High-pressure operation causes gradual internal component wear.

Contamination
Poor fuel quality or debris in the fuel system can damage injector nozzles.

Electrical faults
Injector solenoids can fail, causing misfires or uneven fuel delivery.

Common Symptoms of Failing Injectors

• Engine misfires
• Rough idle
• Hesitation under acceleration
• Increased fuel consumption
• Check engine light
• Poor cold starting

Ignoring faulty injectors can lead to further engine issues, including catalytic converter damage or bore wash from incorrect fuelling.

Why You May Need to Replace Your Macan 2.0 Injectors

Restore Engine Performance
Replacing worn injectors restores correct fuel atomisation and combustion efficiency.

Fix Misfires and Running Issues
New injectors eliminate uneven fuel delivery that causes hesitation and misfire faults.

Improve Fuel Economy
Correct spray patterns ensure optimal air-fuel mixture, improving efficiency.

Prevent Long-Term Engine Damage
Addressing injector problems early protects pistons, valves and emissions components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A7096036

The product you are viewing cross references to these numbers

Fuel Injector – Direct Injection Replacement
Sold each - required per car  

These fuel injectors are designed for the Porsche 95B.1 Macan 2.0ltr engine, providing precise fuel delivery for optimal combustion, performance and efficiency.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18

Diagram Ref No 1  

The Macan 2.0 uses a direct injection system, where fuel is injected at high pressure directly into the combustion chamber. Accurate injector performance is essential for smooth running, power output and emissions control.

What Fuel Injectors Do

Fuel injectors are responsible for:
• Delivering the correct amount of fuel into each cylinder
• Atomising fuel for efficient combustion
• Supporting smooth idle and acceleration
• Maintaining power, fuel economy and emissions compliance

In direct injection engines like the Macan 2.0 TFSI, injectors operate under extremely high pressure and must maintain precise spray patterns.

Why Fuel Injectors Fail

Over time, Porsche Macan 2.0 injectors can develop issues due to:

Carbon build-up
Direct injection engines are prone to carbon deposits, which can affect injector spray patterns and flow.

Internal wear
High-pressure operation causes gradual internal component wear.

Contamination
Poor fuel quality or debris in the fuel system can damage injector nozzles.

Electrical faults
Injector solenoids can fail, causing misfires or uneven fuel delivery.

Common Symptoms of Failing Injectors

• Engine misfires
• Rough idle
• Hesitation under acceleration
• Increased fuel consumption
• Check engine light
• Poor cold starting

Ignoring faulty injectors can lead to further engine issues, including catalytic converter damage or bore wash from incorrect fuelling.

Why You May Need to Replace Your Macan 2.0 Injectors

Restore Engine Performance
Replacing worn injectors restores correct fuel atomisation and combustion efficiency.

Fix Misfires and Running Issues
New injectors eliminate uneven fuel delivery that causes hesitation and misfire faults.

Improve Fuel Economy
Correct spray patterns ensure optimal air-fuel mixture, improving efficiency.

Prevent Long-Term Engine Damage
Addressing injector problems early protects pistons, valves and emissions components.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A7096036

The product you are viewing cross references to these numbers

Injector.

The Injector is a high-precision fuel injection component designed to deliver a finely atomised spray of fuel directly into the engine’s intake tract or combustion chamber. As a critical part of the fuel injection system, the injector ensures the correct amount of fuel is supplied at the right time, promoting efficient combustion, optimal engine performance, fuel economy, and emissions control.
Sold Each.
x4 Required Per Car.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18

Diagram Ref No 28

Manufactured to OEM-quality standards, the injector is engineered for precise fuel metering, reliable operation, and compatibility with modern engine management systems. Built from high-quality materials and precision-machined components, it is designed to withstand fuel system pressures, temperature fluctuations, and continuous operating cycles.

What This Product Does:

• Delivers fuel into the engine in a controlled spray pattern
• Ensures precise fuel metering for efficient combustion
• Works with the engine management system to optimise performance
• Supports smooth engine operation and throttle response
• Helps maintain fuel economy and emissions compliance
• Provides consistent fuel delivery across all engine operating conditions

Symptoms Of Wear Or Failure:

• Engine misfires or rough running
• Poor fuel economy Hard starting or extended cranking
• Loss of power or sluggish acceleration
• Uneven idle or engine hesitation
• Increased exhaust emissions
• Fuel smell from the engine bay or exhaust
• Check engine light and injector-related fault codes

Why Replacement Matters:

• Restores proper fuel atomisation and delivery
• Improves engine performance and throttle response
• Helps reduce fuel consumption and emissions
• Eliminates misfires, hesitation, and rough idle conditions
• Protects the engine from lean or rich running conditions
• Maintains smooth and reliable engine operation
• Supports long-term fuel system and engine health
• Ensures the engine management system can operate as intended

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC906031

The product you are viewing cross references to these numbers

Injector.

This BOSCH Injector is a high-precision fuel injection component designed to deliver a finely atomised spray of fuel directly into the engine’s intake tract or combustion chamber. As a critical part of the fuel injection system, the injector ensures the correct amount of fuel is supplied at the right time, promoting efficient combustion, optimal engine performance, fuel economy, and emissions control.
Sold Each.
x4 Required Per Car.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18

Diagram Ref No 28

This BOSCH injector is engineered for precise fuel metering, reliable operation, and compatibility with modern engine management systems. Built from high-quality materials and precision-machined components, it is designed to withstand fuel system pressures, temperature fluctuations, and continuous operating cycles.

What This Product Does:

• Delivers fuel into the engine in a controlled spray pattern
• Ensures precise fuel metering for efficient combustion
• Works with the engine management system to optimise performance
• Supports smooth engine operation and throttle response
• Helps maintain fuel economy and emissions compliance
• Provides consistent fuel delivery across all engine operating conditions

Symptoms Of Wear Or Failure:

• Engine misfires or rough running
• Poor fuel economy Hard starting or extended cranking
• Loss of power or sluggish acceleration
• Uneven idle or engine hesitation
• Increased exhaust emissions
• Fuel smell from the engine bay or exhaust
• Check engine light and injector-related fault codes

Why Replacement Matters:

• Restores proper fuel atomisation and delivery
• Improves engine performance and throttle response
• Helps reduce fuel consumption and emissions
• Eliminates misfires, hesitation, and rough idle conditions
• Protects the engine from lean or rich running conditions
• Maintains smooth and reliable engine operation
• Supports long-term fuel system and engine health
• Ensures the engine management system can operate as intended

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC906031

The product you are viewing cross references to these numbers

Temperature Sensor For Particulate Filter.

The Genuine Porsche Temperature Sensor for Particulate Filter is an original equipment emissions control component designed to accurately monitor the operating temperature of the diesel particulate filter (DPF) on compatible Porsche diesel models. Manufactured to Porsche's exact specifications for fit, accuracy and durability, this precision sensor continuously measures exhaust temperatures and transmits real-time data to the engine control unit (ECU), ensuring efficient particulate filter regeneration, emissions compliance and optimum engine performance.

Fits:

• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18

Diagram Ref No 8

Manufactured with a high-temperature-resistant sensing element, stainless steel probe and heat-shielded wiring, the sensor is engineered to withstand extreme exhaust temperatures, vibration, moisture and repeated thermal cycling. Designed as a direct replacement for the original component, it integrates seamlessly with the vehicle's engine management and exhaust after-treatment systems, providing factory-correct fitment and dependable long-term operation.  

What This Product Does:

• Monitors the temperature of the diesel particulate filter (DPF).
• Sends accurate temperature data to the engine control unit (ECU).
• Supports efficient DPF regeneration cycles.
• Helps reduce harmful exhaust emissions.
• Protects the particulate filter from excessive temperatures.
• Optimises engine management and emissions system performance.
• Restores factory emissions monitoring functionality.
• Forms an essential part of the diesel exhaust after-treatment system.

Symptoms Of Wear Or Failure:

• Illuminated engine management or emissions warning light.
• Diesel particulate filter (DPF) warning message.
• Exhaust temperature sensor fault codes.
• Failed or incomplete DPF regeneration.
• Reduced engine performance.
• Vehicle entering limp-home mode.
• Increased fuel consumption.
• Excessive exhaust emissions.
• Blocked or overloaded diesel particulate filter.
• Failed emissions or MOT inspection.

Why Replacement Matters:

• The particulate filter temperature sensor operates in one of the harshest environments on the vehicle, where it is continually exposed to extreme exhaust temperatures, vibration and rapid heating and cooling cycles. Over time, the sensing element can deteriorate, while heat exposure and environmental contamination may affect the wiring or electrical connections.
• A faulty sensor can provide inaccurate temperature readings to the ECU, preventing correct DPF regeneration and reducing the efficiency of the emissions control system. This may lead to soot accumulation, increased exhaust emissions, warning lights and, in severe cases, costly damage to the diesel particulate filter or associated exhaust components.
• Replacing a worn or faulty sensor with a Genuine Porsche component restores accurate temperature monitoring and ensures the diesel particulate filter regeneration process operates correctly. Manufactured to Porsche's exact engineering standards, the Genuine Temperature Sensor for Particulate Filter provides precise fitment, exceptional reliability and long-lasting performance, helping maintain emissions compliance, engine efficiency and the reliability expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95890608800

The product you are viewing cross references to these numbers