do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Dummy plugs Genuine Porsche part 99970212850
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Female grommet. Price is for each.
Fits:
Porsche 964 / 965 1989-94
Porsche 968 1992-95
Diagram Ref: 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970216041
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
The Porsche Bonnet Badge Grommet is a genuine OEM retainer designed to securely hold the Porsche bonnet crest in place. These small but essential plastic grommets fit into the bonnet mounting holes and lock the badge pins, preventing vibration, loosening, or badge loss.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
What This Product Does:
The badge on the bonnet is mounted via badge posts/pins, and these small plastic grommets (catch / retainer) insert into holes on the bonnet/hood. The badge pins go through them, and the grommets retain/lock them in place, preventing badge from rattling or coming loose.
Common Symptoms if It’s Damaged / Worn / Missing:
- The bonnet badge is loose or appears to move or wiggle, especially when closing bonnet or driving over bumps.
- Badge is rattling or vibrating inside the badge housing.
- Badge is missing entirely (if grommets broke or came out).
- The badge sits unevenly or one side is lower than the other because one retainer is missing or damaged.
- Badge comes off easily when washing car or under light force.
Why Replacement Matters:
- Keeps your badge securely mounted — prevents badge falling off or being lost, which can look sloppy or give dirt ingress.
- Preserves the factory appearance — badges are a notable styling detail. Missing or misaligned badge detracts from aesthetic and value.
- Avoids damage or scratching to paint where a loose badge may move or chafe.
- Low-cost repair: replacing small grommets is cheap versus replacing entire badge or bonnet panel if paint gets damaged.
Diagram Ref No 24A
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970217550
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Rubber Grommet 8x14x7
Sold each - 2 required per car
Restore the correct mounting and protection of your Porsche components with this OE Match Rubber Grommet (8x14x7), designed for selected Porsche 924, 944 and 968 models. Manufactured to original equipment specifications, this versatile rubber grommet is used in multiple factory applications, including mounting the rear wiper motor carrier plate on the Porsche 924, 944 and 968.
Although small and inexpensive, this rubber grommet plays an important role in reducing vibration, preventing wear and ensuring the secure routing or mounting of key components.
What Does the Rubber Grommet Do?
This OE Match rubber grommet provides cushioning, support and protection between components and the vehicle body.
Its functions vary depending on the application:
On Porsche 924 / 944 / 968:
- Supports the rear wiper motor carrier plate.
- Absorbs vibration from the rear wiper motor.
- Reduces noise transmitted into the bodywork.
- Maintains correct alignment of the rear wiper assembly.
Why Do Rubber Grommets Fail?
Rubber mounting components naturally deteriorate with age and environmental exposure. Common causes of failure include:
- Heat and age causing the rubber to harden.
- Cracking and splitting.
- Compression reducing elasticity.
- UV exposure where applicable.
- Oil, grease or chemical contamination.
- General wear after decades of service.
As the rubber deteriorates, it loses its flexibility and vibration-damping properties, allowing excessive movement, noise or wear to develop.
When Should the Rubber Grommet Be Replaced?
Replacement is recommended whenever the related component is removed or serviced, or if any of the following are found:
- Cracked or perished rubber.
- Loose mounting points.
- Flattened or compressed grommets.
- Increased vibration or rattling.
- Damaged fuel flap release cable support.
- During restoration or preventative maintenance.
Replacing ageing rubber grommets is an inexpensive way to restore factory fitment and protect surrounding components from unnecessary wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970218040
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Rubber Grommet 8x14x7
Sold each - 2 required per car
Restore the correct mounting and protection of your Porsche components with this Rubber Grommet (8x14x7), designed for selected Porsche 924, 944 and 968 models. Manufactured to original equipment specifications, this versatile rubber grommet is used in multiple factory applications, including mounting the rear wiper motor carrier plate on the Porsche 924, 944 and 968.
Although small and inexpensive, this rubber grommet plays an important role in reducing vibration, preventing wear and ensuring the secure routing or mounting of key components.
What Does the Rubber Grommet Do?
This OE Match rubber grommet provides cushioning, support and protection between components and the vehicle body.
Its functions vary depending on the application:
On Porsche 924 / 944 / 968:
- Supports the rear wiper motor carrier plate.
- Absorbs vibration from the rear wiper motor.
- Reduces noise transmitted into the bodywork.
- Maintains correct alignment of the rear wiper assembly.
Why Do Rubber Grommets Fail?
Rubber mounting components naturally deteriorate with age and environmental exposure. Common causes of failure include:
- Heat and age causing the rubber to harden.
- Cracking and splitting.
- Compression reducing elasticity.
- UV exposure where applicable.
- Oil, grease or chemical contamination.
- General wear after decades of service.
As the rubber deteriorates, it loses its flexibility and vibration-damping properties, allowing excessive movement, noise or wear to develop.
When Should the Rubber Grommet Be Replaced?
Replacement is recommended whenever the related component is removed or serviced, or if any of the following are found:
- Cracked or perished rubber.
- Loose mounting points.
- Flattened or compressed grommets.
- Increased vibration or rattling.
- Damaged fuel flap release cable support.
- During restoration or preventative maintenance.
Replacing ageing rubber grommets is an inexpensive way to restore factory fitment and protect surrounding components from unnecessary wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970218040
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Shop Securely
12 Month Warranty
Worldwide Delivery
Rubber Grommet 8x14x7
Restore the original fit, protection and reliability of your
Porsche with this OE Match Rubber Grommet (8x14x7mm), designed for a variety of applications on selected Porsche
911 models. Manufactured to original equipment specifications, this
versatile rubber grommet provides secure mounting, vibration isolation and
protection where cables and pipes pass through body panels or mounting
brackets.
Fits:
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Diagram ref no 14
This OE Match grommet is used in several factory
applications, including:
- Brake master cylinder feed and return pipes.
- Engine lid release cable (1974–1977).
- Fuel flap release cable (1987–1989 models fitted with the plastic fuel expansion bowl).
Although small, this rubber grommet plays an important role in protecting components from wear, vibration and damage while helping maintain factory-quality fitment.
What Does the Rubber Grommet Do?
The rubber grommet provides a protective and cushioned interface between the vehicle body and cables or pipework.
Depending on its installation location, it performs several
important functions:
- Supports brake master cylinder feed and return pipes.
- Protects hydraulic pipes from chafing against metal panels.
- Supports the engine lid release cable.
- Guides and protects the fuel flap release cable.
- Prevents vibration and rattles.
- Eliminates metal-to-metal contact.
- Helps reduce wear caused by continual movement.
By securely locating these components, the grommet contributes to long-term reliability throughout the vehicle.
Why Do Rubber Grommets Fail?
Rubber components naturally age and deteriorate over time
through constant exposure to heat, vibration and environmental conditions.
Common causes of failure include:
- Age-related hardening.
- Cracking and splitting.
- Compression causing loss of elasticity.
- Oil, grease or brake fluid contamination.
- UV and ozone exposure.
- General wear after years of service.
Once the rubber loses its flexibility, it can no longer properly support or protect the cables and pipework, increasing the risk of wear and vibration.
When Should the Rubber Grommet Be Replaced?
Replacement is recommended whenever the surrounding
components are removed or serviced, or if you notice:
Cracked
or perished rubber.
- Loose cables or pipework.
- Flattened or compressed grommets.
- Signs of cable or pipe chafing.
- Missing or damaged grommets.
- During restoration or preventative maintenance.
Replacing worn rubber grommets is an inexpensive way to restore factory fitment while protecting valuable cables and hydraulic components from premature wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970218040
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed