do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Mouling Genuine Porsche part PCG55900100
• This part is brand new and unused.
• Please verify that it is 100% suitable for your specific vehicle before purchase to ensure compatibility.
Before purchasing thoroughly check part to confirm compatibility.
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
Rocker Panel Moulding - fits Left or Right Hand Side
Sold each - 2 required per car
Restore the elegant side profile of your classic Porsche
with this OE Match Rocker Panel Moulding,
designed for the Porsche 356 Speedster, 356B and 356C. Manufactured to
original equipment specifications, this premium replacement moulding recreates
the factory appearance while providing a precise fit and high-quality finish
worthy of any restoration or refurbishment project.
Fits:
- Porsche 356 Speedster 1950-55
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Diagram ref no 1
Whether you are completing a concours restoration or replacing damaged original trim, this OE Match rocker panel moulding helps return your Porsche 356 to its authentic factory appearance.
What Does the Rocker Panel Moulding Do?
The rocker panel moulding is an exterior trim component fitted along the sill (rocker panel) beneath the doors.
Its primary functions include:
- Enhancing the classic styling of the Porsche 356.
- Providing a clean, factory-correct finish to the rocker panel.
- Concealing panel joints and fixing points.
- Helping protect the sill edge from minor scuffs and stone chips.
- Completing the authentic appearance of the bodywork.
- Maintaining the original Porsche design lines.
Although primarily decorative, the rocker panel moulding plays an important role in the overall presentation and originality of the vehicle.
Why Should the Rocker Panel Moulding Be Replaced?
After decades of use, original mouldings can deteriorate due
to age and environmental exposure. Common reasons for replacement include:
- Corrosion or pitting.
- Dents caused by road debris or incorrect lifting.
- Scratches and impact damage.
- Loss of shine through age.
- Distortion from previous repairs.
- Missing or damaged trim during restoration.
- General deterioration affecting the vehicle's appearance.
Replacing worn mouldings significantly enhances the overall finish of a restored Porsche 356.
When Should the Rocker Panel Moulding Be Replaced?
Replacement is recommended whenever:
- Restoring the vehicle to factory condition.
- Repainting the body.
- The original moulding is damaged or corroded.
- Trim has become loose or distorted.
- Completing a concours-quality restoration.
- Replacing missing exterior trim.
Installing new mouldings during body restoration ensures the finished vehicle achieves the correct factory appearance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55901107
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Curved Single Engine Lid Ventilation Grille
Restore the distinctive appearance and cooling performance
of your classic Porsche with this OE Match Curved Single Engine Lid Ventilation
Grille for the Porsche 356B T6 and 356C T6. Manufactured to replicate
the original factory specification, this direct replacement features the correct curved profile, mounting points and
finish to complement the factory engine lid.
Fits:
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Diagram ref no 1
The engine lid ventilation grille is an iconic feature of the Porsche 356's rear bodywork, allowing cooling air to enter the engine compartment while maintaining the unmistakable styling of the later T6 models. Whether you're undertaking a concours restoration or replacing a damaged original, this OE Match grille delivers factory-style quality, fit and appearance.
What Does the Engine Lid Ventilation Grille Do?
The engine lid ventilation grille performs a vital function in the cooling system of the air-cooled Porsche 356 engine.
Its primary functions include:
- Allowing a constant supply of fresh air into the engine compartment.
- Feeding cooling air to the engine cooling fan.
- Helping maintain correct engine operating temperatures.
- Preventing larger debris from entering the engine bay.
- Preserving the original factory appearance of the rear engine lid.
As the Porsche 356 relies entirely on airflow for engine cooling, maintaining unrestricted airflow through the engine lid grille is essential for reliable engine performance.
Why Does the Engine Lid Grille Fail?
After decades of use, original engine lid grilles often show signs of age and damage.
Common causes include:
- Corrosion caused by moisture and environmental exposure.
- Bent or distorted grille slats from accidental impacts.
- Pitting and deterioration of the chrome or surface finish.
- Damage during engine lid repairs or restoration work.
- Fatigue from repeated removal and refitting.
- Missing or damaged mounting points.
Even minor damage can spoil the appearance of an otherwise beautifully restored Porsche 356 and may reduce airflow into the engine compartment.
When Should It Be Replaced?
Replacement is recommended when:
- The grille is bent, cracked or distorted.
- Corrosion has affected the finish or structural integrity.
- The original grille is missing.
- Restoring a Porsche 356B T6 or 356C T6 to factory specification.
- Repainting or replacing the engine lid.
- Completing a concours-quality restoration.
Replacing a worn or damaged engine lid grille restores the correct appearance while ensuring the engine continues to receive the airflow required for efficient cooling.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55904106
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 F (1972 - 1973) * Only suitable for 911 Carrera RS 2.7
The 911 Carrera RS 2.7 has been causing goosebumps for 50 years now, and not just for the driver. Celebrate this anniversary with the RS 2.7 decal set in Mexico Blue, which was reissued especially for the legendary 911 with ducktail. This 7-piece set enables the coveted classic to be completely wrapped in decals for the first time.
Made in Germany.
Application instructions are included with the set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55903400
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 F (1972 - 1973) * Only suitable for 911 Carrera RS 2.7
The 911 Carrera RS 2.7 has been causing goosebumps for 50 years now, and not just for the driver. Celebrate this anniversary with the RS 2.7 decal set in Guards Red, which was reissued especially for the legendary 911 with ducktail. This 7-piece set enables the coveted classic to be completely wrapped in decals for the first time.
Made in Germany.
Application instructions are included with the set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55903401
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 F (1972 - 1973) * Only suitable for 911 Carrera RS 2.7
The 911 Carrera RS 2.7 has been causing goosebumps for 50 years now, and not just for the driver. Celebrate this anniversary with the RS 2.7 decal set in Viper Green, which was reissued especially for the legendary 911 with ducktail. This 7-piece set enables the coveted classic to be completely wrapped in decals for the first time.
Made in Germany.
Application instructions are included with the set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55903402
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 911 F (1972 - 1973) * Only suitable for 911 Carrera RS 2.7
The 911 Carrera RS 2.7 has been causing goosebumps for 50 years now, and not just for the driver. Celebrate this anniversary with the RS 2.7 decal set in Black, which was reissued especially for the legendary 911 with ducktail. This 7-piece set enables the coveted classic to be completely wrapped in decals for the first time.
Made in Germany.
Application instructions are included with the set
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55903403
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 356 A (1955 - 1959)
Porsche 356 B (1959 - 1963)
Porsche 356 C (1963 - 1965)
Click 'Zoom in' for large parts diagram.
Diagram ref no 4, 5, 6 and 7.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55900100
The product you are viewing cross references to these numbers
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Shop Securely
12 Month Warranty
Worldwide Delivery
Firs:
Porsche 356B T6 / 356C T6 (1.6-2.0) 08/1961-12/1965
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG55904106
The product you are viewing cross references to these numbers
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed