Planted 90 Degree Universal Sidemount - BLACK  ❭  PS90SM-B

Planted Aluminium 90 Degree Universal Sidemount - GREY



The Planted Aluminium 90 Degree Universal Side Mount is made from 1/4th inch thick aluminium to comply with FIA's 13/64 inch minimum, weighs approximately 3 lbs, and powder coated grey. These will fit Side Mount Seats offered by: OMP, Cobra, Status, Racetech, Sparco, Recaro & Bride for sure and will most likely fit most other seat manufacturers but have not been test fitted. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders). Price listed is for Side Mounts for one seat.

Planted 铝合金偏置通用侧装支架 - 灰色

#种植#

Planted 铝制偏置通用侧装支架采用 1/4 英寸厚的铝材制成，符合 FIA 规定的 13/64 英寸最小厚度要求，重量约为 3.5 磅，并经过灰色粉末涂层处理。该支架可完美适配 OMP、Cobra、Status、Racetech、Sparco、Recaro 和 Bride 等品牌的侧装座椅，并且很可能也适配其他大多数座椅制造商的产品，但尚未进行适配测试。大多数情况下，建议使用 90 度通用侧装支架。但是，当……
如果要安装的座椅宽度与要安装的孔的宽度相同，则需要使用偏置侧安装，因为 90 度侧安装将无法安装螺栓。
例如，安装一个16英寸宽的Recaro滑轨，搭配同样16英寸宽的侧装座椅时，90度侧装支架的垂直部分会挡住安装孔，导致无法安装螺母和螺栓来固定座椅。在这种情况下，您肯定需要使用偏置侧装支架。

侧装支架可直接用螺栓固定在滑轨上，但设有多个调节槽，方便直接安装（无需滑轨）。所列价格为单个座椅侧装支架的价格。

这些运动座椅适用于所有品牌和车型。
由于该产品的通用性，某些修改或
可能需要对座椅或汽车进行改装以确保正确安装。

Planted Offset Universal Side Mount- BLACK



The Planted Steel Offset Universal Side Mount is made from 1/8th inch thick steel which complies with FIA's required thickness, weighs approximately 6 lbs, and powder coated black. These will fit Side Mount Seats offered by: OMP, Cobra, Status, Racetech, Sparco, Recaro & Bride for sure and will most likely fit most other seat manufacturers but have not been test fitted. In most cases you'll want to use the 90 Degree Universal Side Mount. However, when installing a seat that is the same width as the holes you wish to mount to you'll want to use the Offset Side Mount because a 90 degree side mount will not allow you to install the bolts. An example would be when installing a Recaro slider, which is 16 inches wide, with a side mount seat that is also 16 inches wide. The vertical part of the 90 Degree Side Mount will actually block the holes and not allow you to install the nuts and bolt to hold down your seat. In this case you will definitely want to use the Offset Side Mount. The Side Mounts are made to bolt directly to sliders but have multiple slots for adjustability when direct mounting (eliminating sliders). Price listed is for Side Mounts for one seat.

These sports seats are manufactured for all makes and models.
Due to the universal nature of this product some modification or
alteration maybe required to the seat or car to ensure correct fitting