QuickChange™ front camber plate kit. Porsche Porsche 964/993 - 2152202
代码: 2152202
QuickChange™ front camber plate kit.
Sold per kit, 1 kit req'd per car.
Extend the range of camber adjustment and dial in your desired settings with ease.
These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Fits:
Porsche 964 1990-94 / 993 1995-98 Front camber plate 14mm spacers
Fully Weather Sealed:
We've designed in weather seals on the top and bottom to keep dirt out and extend product life. This is the only camber plate suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
This camber plate is intended to be used with a non-factory upper spring perch and spring. This kit is suited to work perfectly with Von Coilover systems or other similar solutions.
Please note: please contact us if you wish to use this camber plate kit in conjunction with factory or lowering springs.
Ease of Camber Adjustment
Indices on the camber plate allow measured changes without setup tools.
Extended Caster
These plates deliver the same caster as the 993 for enhance camber gain when turning.
Improved Shock / Coilover Performance
Spherical bearings further improve performance. The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2152202
您正在查看的产品与这些编号存在交叉引用关系
Sold per kit, 1 kit req'd per car.
Extend the range of camber adjustment and dial in your desired settings with ease.
These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Fits:
Porsche 964 1990-94 / 993 1995-98 Front camber plate 14mm spacers
Fully Weather Sealed:
We've designed in weather seals on the top and bottom to keep dirt out and extend product life. This is the only camber plate suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
This camber plate is intended to be used with a non-factory upper spring perch and spring. This kit is suited to work perfectly with Von Coilover systems or other similar solutions.
Please note: please contact us if you wish to use this camber plate kit in conjunction with factory or lowering springs.
Ease of Camber Adjustment
Indices on the camber plate allow measured changes without setup tools.
Extended Caster
These plates deliver the same caster as the 993 for enhance camber gain when turning.
Improved Shock / Coilover Performance
Spherical bearings further improve performance. The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2152202
2152202
96434301802
96434301803
96434301882
99334301800
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
€702.10 含 VAT
当前 €688.06 含 VAT
库存