Rear track control arm eccentric bushings. Porsche 993/986/987/996/997

Rear track control arm eccentric bushings.
1 kit required per car



Fits
Porsche 993 - All 1995 to 1998
Porsche 986 and 987 - 1999 to 2012
Porsche 996 and 997 - 1999 to 2012

Running out of rear toe adjustment range is a common problem on lowered cars. The bore on these bushings is offset by 6mm effectively shortening or lengthening the length of the toe link and bringing the toe adjustment back into range.

Decrease toe in

Position the eccentric to decrease toe arm length by 6mm. This solves a common problem with lowered cars that have too much toe in but not enough toe adjustment range to correct the issue.

Increase toe in

Position the eccentric to increase toe arm length by 6mm. Cars with a lot of negative camber can have too much toe out but not enough range of toe adjustment to bring it back to range.

Sport hardness rubber improves performance by reducing compression under heavy loads while providing the same noise damping quality of the stock rubber.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2290032

您正在查看的产品与这些编号存在交叉引用关系