高清前控制臂/A臂衬套套件。适用于保时捷911/912/930/914（1969-1989年款）。  ❭  91134190100

后叉臂，上部。

#保时捷#

适合：
保时捷 991.1 Carrera 2012-16
保时捷 991.2 Carrera 2017>>
保时捷 997 Turbo 2014>>
保时捷 991 GT3 2014-17
保时捷 991 GT3 2018>> 2017 年 8 月 31 日之前生产的汽车

保时捷 992 Turbo / Turbo S

单击“放大”可查看大部件图。
图表参考编号 12

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9P1505397A

您正在查看的产品与这些编号存在交叉引用关系

后叉臂，较低。



适合：
保时捷 991.1 Carrera 2012-16
保时捷 991.2 Carrera 2017>>
保时捷 991 Turbo / GT2 2014>>
保时捷 992 Carrera - 2019 年>>
保时捷 992 turbo - 2019>>

单击“放大”可查看大部件图。
图表参考编号 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9P1505311

您正在查看的产品与这些编号存在交叉引用关系

Adjustable lower control arms (lower wishbone)



Fits
Porsche 986 Boxster - Front and Rear
Porsche 996, 997 - Front and Rear
Porsche 991 - Front Only
Porsche 987 Boxster and Cayman - Front and Rear
Porsche 981 Boxster and Cayman - Front and Rear
Porsche 718 Boxster and Cayman - Front and Rear

Set of 2 x Adjustable lower control arms - 1 pair, required per axle

Elephant Racing adjustable lower control arms provide the camber, caster and precision you need. Length adjustable similar to the factory GT3 control arms, but without the need for shims.

Quick and Easy Adjustments – No need to keep a stock of shims on hand, length is easily adjusted by rotating the center hex head. Rotate clockwise to expand or counter-clockwise to contract the arm length.Adjustments can be made within minutes. No shims to mess with. Perfect setup to make quick changes for the track.

Widen Track – Use in combination with our camber plates on the front, or our adjustable length arms upper control arms on the rear to widen the track. This allows you to achieve a wider track without altering the scrub radius as happens when using wheel spacers.

Heim Joint – Our spherical bearings eliminate the deflection associated with rubber bushings. These bearings maintain stable suspension alignment, and improve feedback.

Fully Weather Sealed – Proper boots at both the ball joint and heim joint ends to keep water and contaminants out for extended life. These arms are suitable for extended road and track use.

Camber Adjustment – Extended range of adjustment lets you achieve aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.

Caster Adjustment – Our Caster Adjuster allows you to tune this important setting that the factory left out. A must-have for cars that have extended lower control arms to correct for un-intended caster change that is caused by the extended arms. Rotate the center puck and bolt down to secure the setting.

The arms are fully rebuildable with replaceable heim and ball joints.

On 996, 997, & 991 Cars:
Center puck can be also used as a wheelbase adjuster on the rear to draw the wheels back to improve weight distribution. It is a great tuning aid for adjusting out understeer

Litronic Bracket – This bracket is required for cars that are originally equipped with the litronic headlights. This adapter bracket attaches to the headlight angle sensor.


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2180001

您正在查看的产品与这些编号存在交叉引用关系