可调控制臂保时捷 986 / 996 / 997 GT3。保时捷 996 / 997 / Boxster 986/987 / Cayman 987  ❭  996010

RSS Lower Control Arm Kit for Porsche Models .
Type: None Adjustable Thrust Arm Bushing



RSS Tarmac Series Motorsport Lower Control Arms are specifically engineered for use on lowered vehicles that have reduced travel struts/dampers such as PASM or M030 option. Alternatively if the car is equipped with high quality aftermarket or motorsport coilover kits ie Bilstein PSS10, KW V3 or Ohlins etc.

The Lower Control Arms are NOT COMPATIBLE with "Base Model Suspension" (long travel struts/dampers) or "Base Model struts/dampers with lowering springs."
Caution: Do not install on vehicles with Base Model struts/dampers as it may result in an unsafe driving condition with possibility of suspension bind when struts/dampers are fully extended or in full drop.

Price: Set of Two Control Arms plus 2 x 1mm/2mm/3mm/7mm Shims.

RSS Tarmac Series Control Arms are manufactured from 6061 aerospace grade billet aluminum. This allows for a more uniform molecular structure
at every point of the arm over the cast motorsports arm giving the customer a more durable and inherently stronger part. Manufacturing from billet
aluminum rather than casting results in less impurities in the metal.

• Completely serviceable - for the extreme, repetitive track-day participant, our high-strength steel alloy spherical bearings (with a friction reducing /longevity increasing Teflon liner) can be replaced unlike the motorsports arm, in which case the customer will have to buy a new set of arms if the spherical bearings are worn.
Additionally, anodized surfaces and zinc-plated steel parts allow for better corrosion resistance against the elements.

• Adjustable suspension geometry - adjust dynamic camber values and roll center heights with our unique zinc-plated steel bushings.

• Solid monoball control arm ends offer a more responsive suspension over the factory one-piece rubber-injected control arm (also uses the same high
strength steel alloy spherical bearing found in our control arm monoball kit).

• Unique design provides more gusseting over the motorsports arms for added strength and aesthetically appealing looks.

Please Check Fitting Guide Before Ordering Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

357

您正在查看的产品与这些编号存在交叉引用关系

保时捷车型下控制臂调整垫片



价格：一个对齐垫片

RSS 定位垫片专为配合工厂或售后市场的两件式赛车风格控制臂使用而设计。非常适合在安装过程中获得更多负外倾角和调整轮距。

垫片有多种尺寸，包括 1 毫米、2 毫米、3 毫米、5 毫米、7 毫米、10 毫米和 11 毫米。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

300

您正在查看的产品与这些编号存在交叉引用关系

这个单球衬套安装在下摆臂“棺材”臂的后部。

适用：
保时捷 986 Boxster
保时捷 987 Boxster
保时捷 987C Cayman
保时捷 996 1998-04
保时捷997
保时捷 991
保时捷 981 Boxster
保时捷 981 Cayman

密封式单球轴承 - 前后 - 如今大多数保时捷车主，尤其是那些经常下赛道的车主，都会为爱车配备比原厂更宽、抓地力更强的轮胎，从而在过弯和制动时承受更高的横向加速度。在这种高强度驾驶情况下，橡胶悬挂衬套会因承受的巨大载荷而发生压缩和弯曲，破坏车辆精细调校的四轮定位，进而降低制动和过弯性能。单球轴承则是一种无副作用的改进方案；它消除了悬挂系统中四个重要的间隙来源，同时又不会增加车辆的行驶舒适性。您的保时捷将拥有更精准、更可预测的操控性和更清晰的路感反馈。Rennline 单球轴承采用 FK Motorsports 轴承，经镀镉处理并密封，可防止因潮湿或灰尘污染而导致的过早磨损，确保其在赛道或公路上的使用寿命更长。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S18SETOF2

您正在查看的产品与这些编号存在交叉引用关系