座椅固定适配器 保时捷 986 / 996 / 997 / 987 / 987C  ❭  99652100005

3D-printed Bucket seat centre panel.
Please note: Only available for vehicles with full-bucket seats and only for the driver's seat.



Fits:
Porsche 911 (991) R / GT3 / GT3 RS
Porsche 911 (991 II) Carrera T / Speedster / GT3 / GT3 RS / GT2 RS
Porsche 911 (992) Carrera GTS / Carrera 4 GTS
Porsche 911 (992) Turbo / Turbo S
Porsche 911 (992) GT3 / GT3 with Touring-Package
Porsche 718 (981) Boxster Spyder
Porsche 718 Boxster (982) GTS / GTS 4.0 / T
Porsche 718 Cayman (982) GTS / GTS 4.0 / T / GT4 / GT4 4.0
Porsche 718 Spyder

The 3D printed bodyform full-bucket seat combines maximum functionality with individual design. The seat cushion and the seat backrest of the full-bucket seat already installed in the vehicle are replaced by new elements. These consist of a solid and energy-absorbing substrate material, a 3D-printed elastic grille structure and a perforated top covering made of Race-Tex. The grille structure and perforation improve both the passive air conditioning and the resilience of the seat. At the same time, depending on the selected degree of hardness, the upholstery has a weight advantage of more than 8% compared to the standard material. A deep seat position typical of motor sports and increased lateral support thanks to a thigh cushion provide an even more direct feel for the track - for an experience similar to that in motor racing.

As a visual highlight, the visible grille elements on the cushion and backrest are available separately in various colours.

The 3D printed bodyform full-bucket seat can be installed and removed again in a few simple steps. Compatible with both 3- and 6-point seat belts. Includes a practical transport bag.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

982044779

您正在查看的产品与这些编号存在交叉引用关系

侧垫保护罩。保时捷 918 固定桶形座椅

#复古装饰#

如果您的汽车配备了 918 固定碳纤维桶形座椅，那么进出时可能是一项体力挑战，会导致明显的磨损、皮革装饰上的深折痕和缝线撕裂。

这是采用 918 座椅垫保护装置提供的解决方案。

一旦安装在两个座椅的外侧垫子上，这款新上市的产品就能完美地复制标准垫子的外观，因为它采用保时捷工厂的黑色纳帕皮革制成，并采用您选择颜色的偏离缝线。
连同附加的“袖口盖”，这些保护装置还可以遮挡垫子的后部，不会显得格格不入，并且安装也很容易。
请注意保护器“袖口”没有偏离缝线

成对出售 - 左座椅和右座椅

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

918BOLSTERCVR

您正在查看的产品与这些编号存在交叉引用关系

座椅套和标准泡沫套装。保时捷 918 固定碳纤维桶形座椅

如果您的汽车配备了 918 固定碳纤维桶形座椅，改变外观从未如此简单。

从 OEM 911R 及以后的工厂黑色/银色或玛瑙灰色材料（非复制品）或我们的 Pepita 千鸟格面料系列中进行选择。

该套装配有全新的靠背和座椅底座泡沫（与原厂一样），采用您想要的材料覆盖，安装非常简单。

这些床垫使用的泡沫密度与出厂产品相同。如果您觉得它们太硬，请查看我们更软的泡沫系列。

请注意
当安装 2021 年及以后的座椅时，请确保在座椅上工作时断开电池，以免出现任何警告灯。