热交换器
- Porsche 911 1965-1968 2.0L / 912 SWB(F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB(F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L 涡轮增压(930)
- Porsche 911 1978-1989 3.3L 涡轮增压(930)
1 x Stainless steel Sports exhaust with big bore 84mm outlet,
2 x Stainless steel heat exchangers.
1 x Stainless steel Standard pre-silencer.
1 x Stainless steel cross over pipe.
This system offers more bhp and a fuller sound.
Fits:
Porsche 911 3.2L 1984-89
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Mild steel exhaust system:
- 1 x Mild steel rear exhaust box.
- 2 x Mild steel heat exchangers.
- 1 x Mild steel pre-silencer.
- 1 x Mild steel cross over pipe.
Fits:
Porsche 911 1984-89 3.2L
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Are you backdating a 3.2 Carrera or 3.2ltr engine?
Use this exhaust and SSi heat exchanger package to solve the exhaust requirements by deleting the pre-silencer and turning the rear silencer into a "two in, one out" system seen on the early, pre impact bumper cars.
Powerful straight though system all Stainless steel parts, offering more bhp and a fuller sound. Made in Denmark you should also purchase EXHAUSTKIT09
Fits:
Porsche 911 1984-89 3.2ltr
Kit Includes:
- 1 x single outlet rear silencer (Dansk)
- 2 x heat exchangers, (SSI)
- 2 x oil pipes
- 8 x gaskets.
- 2 x silencer straps.
Please note the heating system will need to be re-worked so extra parts are included 1 x heater splitter box and 2 x heater hoses.
For more information about this product Click Here
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Replace the rusty, steel heat exchangers and exhaust with this high quality exhaust and stainless steel SSi heat exchanger package.
Made using AISI 321/EN4531 titanium stabilized stainless steel, the heat exchangers offer long life, increased power output and a quality fit.
Heat Exchangers & Twin Outlet Rear Silencer/Muffler 70mm Tail Pipe 92.511SD
Powerful straight though system all Stainless steel parts, offering more bhp and a fuller sound. Made in Denmark. you should also purchase EXHAUSTKIT09
Fits:
Porsche 911 1974-83 2.7ltr / 3.0ltr
Kit Includes:
- 1 x twin outlet rear silencer (Dansk)
- 2 x heat exchangers, (SSI)
- 2 x oil pipes
- 8 x gaskets.
- 2 x silencer straps.
For more information about this product Click Here
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
1 x Stainless steel Sports exhaust with twin big bore 84mm outlets.
2 x Stainless steel heat exchangers.
1 x Stainless steel Standard pre-silencer.
1 x Stainless steel cross over pipe.
offering more bhp and a fuller sound.
Fits:
Porsche 911 3.2L 1984-89
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 911 2.7-3.0L 08/73-10/83
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
EXHAUSTKIT1041
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 2.7-3.0L 08/73-10/83
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
EXHAUSTKIT1040
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 2.7-3.0L 08/73-10/83
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
EXHAUSTKIT1030
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 3.2L 08/83-07/89
Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
EXHAUSTKIT1020
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 911 3.2L 08/83-07/89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
EXHAUSTKIT1010
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
1 x Stainless steel painted rear muffler
2 x Stainless steel heat exchangers with Ø41 mm outside tubing
1 x Stainless steel cross over pipe.
1 x Stainless steel intermediate pipe.
Fitting kit including nuts, bolts, gaskets and strap.
Fits:
Porsche 930 3.0L / 3.3L 1975-89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
EXHAUSTKIT82
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
1 x Stainless steel painted rear muffler
2 x Stainless steel heat exchangers.
1 x Stainless steel cross over pipe.
1 x Stainless steel intermediate pipe.
Fitting kit including nuts, bolts, gaskets and strap.
Fits:
Porsche 930 3.0L / 3.3L 1975-89
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
EXHAUSTKIT80
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Exhaust heat exchanger fitting kit. Includes studs and nuts made out of titanium.
These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system.Fits:
Porsche 911 3.2L 1984-89
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Exhaust heat exchanger fitting kit. Includes studs and nuts made out of titanium.
These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system.Fits:
Porsche 911 1965-83
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
You will require these pipes if you go ahead with the pre 1974 straight through exhaust system.
Oil thermostat to engine crankcase conection.
Fits:
Porsche 911 1984-89 3.2L
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
OILPIPEKIT01
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Improve exhaust gas flow using these "big bore" SSi heat exchangers and Racing exhaust silencer/muffler
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.
Fits:
Porsche 911 2.7ltr -3.0ltr 08/1973-10/1983
Porsche 911 S (mech. injection) 2.4ltr 08/1971-07/1973
Porsche 911 T/E/S (not mech. injection) 2.0ltr -2.4ltr 01/1963-12/1973
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1620801910
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Improve exhaust gas flow using these "big bore" SSi heat exchangers and GT3 style exhaust silencer/muffler
Made using Ø41 mm outside tubing for a better flow and performance these AISI 321/EN4531 titanium stabilized stainless steel heat exchangers offer long life, increased power output and a quality fit.
Fits:
Porsche 911 2.0ltr -2.4ltr 01/1963-07/1973
Porsche 911 2.7L-3.0ltr 08/1973-10/1983
Porsche 914/6 2.0ltr 11/1969-12/1973
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1620802010
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 Turbo (1984 - 1989)
Porsche 911 Carrera (1984 - 1989)
Excluding 911 G with engine type 930/26
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93021133500
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91122091021S
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Fits:
Porsche 911 2.7-3.0L 08/1973-07/1983
Exhaust conversion set, free-flow, with 60 mm tail pipe. You will need to convert the oil pipe system due to change of heat exchangers's shape. All oil pipes necessary are provided with this kit.
Material: Stainless Steel
Number of Inlets / Outlets: 2/1
Outer Diameter: 60 mm
Surface: Blank
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1620000810
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 3.2L 08/1983-07/1989
Material: Stainless Steel
Number of Inlets / Outlets: 2/2
Surface: Blank
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1620000210
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
#罗勒#
• 超高性能产品
• 采用钛Ti6Al4V技术
包含12 个螺柱、螺母和垫圈
适合:
保时捷 911 1965-77
保时捷 964(无涡轮增压)
保时捷 993 全部
保时捷 996(无涡轮增压)
保时捷 997(无涡轮增压)
保时捷 986 全部
保时捷 987 全部
保时捷 718 4 缸涡轮增压
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TITANSTUDS12
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Fits:
Porsche 911 Turbo 3.0Ltr / 3.3Ltr 01/1975-07/1983
In 1984 Porsche increased the heat exchanger manifold down pipe diameter from 39mm to 41mm to increase exhaust gas flow.
Here that pipe diameter increase has been incorporated into the earlier type heat exchanger for that added benefit to all 3.0Ltr and 3.3Ltr cars from 01/1975-07/1983
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93033091103S41
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
MILD STEEL
Fits:
Porsche 911 2.3L / 2.7L 1971-75
For the RIGHT hand side use part No.
91133091012 = Mild Steel
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91133091013
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
POLISHED STAINLESS STEEL
Fits:
Porsche 911 2.3L / 2.7L 1971-75
For the RIGHT hand side use part No.
91133091012S = Stainless Steel
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91133091013S
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Ø41 mm outside tubing
Fits:
Porsche 911 SC/911 Carrera 2.7L-3.0L 08/1975-07/1983
Price is for each one
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91133091101S41
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 1965-69
Porsche 911 T-V / 911 T-K 1970-73
Porsche 911 / 911S / Carrera2.7 >>1974
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91121102
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Fits:
Porsche 911 Turbo 1984–189
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93021103304
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1978-1989 3.3L Turbo (930)
GALVANISED STEEL
Fits:
Porsche 911 2.7L / 3.0L 1974-83
Price is for each one
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91133091101G
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
MILD STEEL, PAINTED
Fits:
Porsche 911 2.7L / 3.0L 1974-83
Price is for each one
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91133091101
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
MILD STEEL, PAINTED
Fits:
Porsche 911 3.2L 1984-89
Price is for each one
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91133091104
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
MILD STEEL
Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76
For Carburettor engine cars.
Select below. Price is for each one
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9113309101
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
MILD STEEL
Fits:
Porsche 930 3.0L Turbo 1975-77
Porsche 930 3.3L Turbo 1978 Onwards
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93033091103
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
POLISHED STAINLESS STEEL
Fits:
Porsche 911 2.7L / 3.0L 1974-83
Price is for each one
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91133091101S
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
POLISHED STAINLESS STEEL
Fits:
Porsche 911 T / E / S 2.0-2.4L 1964-73
Porsche 911 / S / CARRERA 2.7L 1974-76
For Carburettor engine cars.
Price is for each one.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9113309101
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
POLISHED STAINLESS STEEL
Fits:
Porsche 911 3.2L 1984-89
Price is for each one
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91133091104S
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
POLISHED STAINLESS STEEL
Fits:
Porsche 930 3.0L Turbo 1975-77
Porsche 930 3.3L Turbo 1978 Onwards
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
93033091103S
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 912 1965-69 Europe and USA
Price is for each one.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9123309222
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits:
Porsche 356 A 1.5L-1.6L 01/1955-1219/61
Porsche 356 B T.5 Europe 1.6L 01/1959-08/1961
Porsche 356 B/C export - USA 1.6L 01/1959-12/1965
Porsche 912 1.6L 01/1965-121969
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
16233001
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 930 (911) Turbo
Direct replacement for the stock headers, the stock factory headers restrict performance and are failure prone.
• 14-16 gauge T304SS, C.N.C. mandrel bent with high velocity IndyCar/Formula 1 merge collectors for optimum flow to the headers for quicker turbo spool.
• These headers will work with the stock muffler or any aftermarket muffler designed to fit like OEM.
• The system will include a drip accumulator with double swivels and Aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator. 7/8" custom braided oil lines with correct 30mm radius Porsche style ball end will be included to replace the stock oil lines.
• Hardware necessary for installation includes copper nuts for the header/manifold mounting with copper gaskets for no leaks and purges.
• The world's 100% finest, strongest, and easiest headers to install.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
FSPOR911TSHDRWH
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- 101-05
- 103-00
- 103-05
- 104-25
- 101-05
- 103-00
- 101-10
- 105-00
- 106-00
- 107-40
- 202-00
- 202-10
- 302-00
- 302-05
- 308-00
- 813-35
- 107-20
- 202-05
- 101-05
- 101-10
- 103-00
- 105-00
- 202-00
- 202-05
- 202-10
- 202-15
- 202-16
- 301-07
- 302-00
- 302-02
- 302-07
- 302-05
- 302-25
- 306-00
- 307-00
- 307-10
- 307-25
- 101-05
- 101-10
- 103-00
- 105-00
- 202-00
- 202-05
- 202-10
- 202-15
- 202-16
- 813-20
- 302-00
- 302-05
- 813-20
- 101-05
- 101-10
- 103-00
- 104-00
- 104-05
- 105-00
- 107-25
- 202-00
- 202-10
- 302-05
- 308-00
- 302-00
- 302-30
- 101-05
- 103-00
- 103-10
- 107-06
- 107-20
- 107-30
- 202-10
- 202-20
- 302-00
- 302-05
- 306-00
- 307-00
- 101-05
- 101-10
- 103-00
- 105-00
- 107-05
- 202-00
- 202-10
- 202-20
- 302-00
- 302-05
标题:用排气热交换器升级你的保时捷:技术规格和优势
性能提升:升级保时捷排气热交换器(无论是原装保时捷还是售后选件)都可以显著提升车辆性能。这些热交换器采用的改进设计和材料有助于优化排气流量,从而提高马力和扭矩。
高效散热:排气热交换器在散发保时捷发动机产生的多余热量方面起着至关重要的作用。升级到高品质热交换器可确保高效散热,防止过热问题并延长发动机寿命。
增强耐用性:原装保时捷或售后排气热交换器采用耐用材料制造,例如不锈钢或高级合金。这些坚固的组件具有出色的抗腐蚀、耐热和抗震性能,可确保持久的性能和可靠性。
排放合规性:升级保时捷排气热交换器可帮助您的车辆符合排放法规。许多售后市场选项旨在满足或超过排放标准,同时保持最佳性能水平。
精确安装:购买保时捷排气热交换器时,务必确保其专门设计以适合您的车型和发动机类型。这可确保无缝安装过程和最佳功能。
在 Design911,我们专门提供高品质保时捷零件,包括原装保时捷和售后排气热交换器。我们拥有丰富的库存和知识渊博的员工,能够帮助您找到适合您的保时捷车型的正确零件。我们提供专业建议,确保您根据具体要求做出明智的决定。相信我们能提供最佳解决方案来升级或更换您的保时捷排气热交换器,提高性能、耐用性和整体驾驶体验。立即联系我们,了解我们的保时捷零件系列,并从我们的专业知识中受益。