CMS
We specialize in Porsche transmissions, manufacturing many components and upgrades.
CMS have served the Porsche community for over 35 years and continue to do so.
Our custom "coarse spline/18 spline" drive flanges will allow 930 or G50 CV joints (with metal grease caps) to bolt up to the early 1969-75 911s and all 914 transaxles.
Shaft length was designed with the stock open diff in mind. If by off-chance you have a factory LSD, spacers will be required.
Sold in pairs.
Fits
Porsche 911 - 1969 to 1975
Porsche 914
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CMS.914.18T
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Note
Longer ring gear bolts may be required
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 964 C2 '90-'94 with G50/03, G50/05 transmission
G50/21 transmission.
Porsche 993 C2 & C4 '95-'98 with G50/20, G64/20 transmission
Replaces part numbers: 950.301.312.06, 950.301.312.07
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95030131207
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
✓ Proper rail to fork interference fit
✓ Perfect roll pin provision
✓ Substantial surface area to shift sleeve
✓ Maintains correct tolerances
Fits all 996T, 996 & 997 GT2 & GT3 including RS and synchromesh CUP
G96/50, G96/88, G96/90, G96/93, G96/96, G96/97, G97/88, G97/90, G97/92
Replaces part 996.303.111.51
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630311151
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
2nd gear repair kit consisting of
- 2nd gear wheel, 41 tooth (20:41)
- 1st/2nd shift sleeve
- 2nd gear synchros (3 part)
987 2nd gear
987 1st/2nd shift sleeve
987 1st or 2nd synchros
987 3rd-6th synchros
987 3rd/4th shift sleeve
987 5th/6th shift sleeve
Fits all G87/20 transmissions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
01X311300
The product you are viewing cross references to these numbers
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Our design features a replaceable steel threaded insert for the bolt in the event the threads should ever strip.
Fits all 356 transmissions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
51920246
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Our design features a replaceable steel threaded insert for the bolt in the event the threads should ever strip.
Fits all 356 transmissions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
51920245
The product you are viewing cross references to these numbers
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Comes with custom -8AN fitting, O ring and set screws.
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
For all Porsche 968 6 speed transmissions '92'-'95. (G44/00, 01E)
Our design features include:
A ring gear thrust bolt to reduce ring gear deflection under load
Cross drilled oil passageways for the differential bearing
Replaces part 01E.409.131A
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
01E409131A
The product you are viewing cross references to these numbers
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits all Porsche 924/944 5 speed transaxles 80-91. 924, 924S, 944, 944S, 944S2, 944T
5Y, 5S, 5Z, 7V, 5P, UY, 9U, AGP, AGR, AOR, AOS, AOT, ASG, ASH, VX, VR, UV, MD, ME, MF, MB, MX
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
016311575C
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
Fits all Porsche 924/944 5 speed transaxles 80-91. 924, 924S, 944, 944S, 944S2, 944T
5Y, 5S, 5Z, 7V, 5P, UY, 9U, AGP, AGR, AOR, AOS, AOT, ASG, ASH, VX, VR, UV, MD, ME, MF, MB, MX
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
016311561A
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
Fits all Porsche 924/944 5 speed transaxles 80-91. 924, 924S, 944, 944S, 944S2, 944T
5Y, 5S, 5Z, 7V, 5P, UY, 9U, AGP, AGR, AOR, AOS, AOT, ASG, ASH, VX, VR, UV, MD, ME, MF, MB, MX
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
016311549A
The product you are viewing cross references to these numbers
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
Ours are designed without.
G97.01, G97.31
Part Numbers
99730311100/1 1st/2nd
99730311300/1 3rd/4th
99730311500/1 5th/6th
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99730311500
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Ours are designed without.
G97.01, G97.31
Part Numbers
99730311100/1 1st/2nd
99730311300/1 3rd/4th
99730311500/1 5th/6th
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99730311300
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Fits all 996 C2/C4 6 speed transaxles G96.00, G96.01, G96.30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630301500
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Fits all 996 C2/C4 6 speed transaxles G96.00, G96.01, G96.30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630301300
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Fits all models 2005 on* G87.20, G87.21, G87.10
*Let us know which differential you are using. We may have to modify the supplied bearing.
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Fits all Boxster S 6 speed transaxles G86.2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98630301500
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
Fits all Boxster 6 speed transaxles G86.20
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98630301300
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
Fits
Porsche 986 Boxster S 2000-04 (6 speed)
Porsche 996 1999-2004
G86.20, G96.00, G96.01, G96.30
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630301001
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Genuine Porsche bearings are recommended
Fits 911/912 64-69.5 aluminium case 901 transmissions.
90130122100, 901-301-221-00
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90130122100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Precision machined from 4130 Chromoly
Better supports both main and pinion shaft bearings
Improved design captures the main shaft bearing 45% more than OEM
Substantial clearance provided for even non-standard tall 1st gear ratios
Perfect fit for bearings and assembly
Much stronger than the original cast part
Replaces part 901.301.251.01 tensioning plate
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90130125101
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Under load there can be a tremendous force applied to this cover, and it can break, sometimes resulting in a damaged ring and pinion-or worse.
Upgrading to a billet side plate will add significant strength and increased reliability to the differential section.
Our design features include:
A ring gear thrust bolt to reduce ring gear deflection under load
Ports that can be used for an oil cooling system
Cross drilled oil passageways for the differential bearing
Comes with (3) 3/4 - 16 O ring plugs.
Replaces part 930.301.311.02
930/30, 930/33, 930/34, 930/36, 930/37, 930/67
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93030131102
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
The update is a also good repair for those whom have loose, damaged or worn out guide tubes.
** This requires machining to fit
The original is machined off and a custom steel tube is fitted. It's further retained from the inside of the diff case with a high quality snap ring and sealed with the factory o-ring.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
** This requires machining to the front "nose cone" housing.
We have updated our 915 spray bar kit to include an improved oil return port that will not interfere with the torsion bar tube and allows for better routing of the oil return line.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Machined from 6061 T6 aluminium; features a replaceable threaded insert for the supplied bolt.
Fits all Porsche 915 transaxles 72-86 and 930 4 speed transaxles 76-88.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91530311100
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits all 993 6 speed transaxles C2/C4/T
G50/20/21; G64/21/21/51
Replaces part 950 303 116 00
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95030311600
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
The cast steel RS fork does not have this issue but it's not a billet steel one like ours...and it's less expensive.
Fits all G50 5 speed transmissions '87-'94 and all G50 6 speed transmissions '95-'98 including C4, RS, Turbo and RSR models.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01, G50/20, G50/21, G50/31, G50/31, G50/33, G64/51, G64/52)
Replaces part 950.303.113.04, 950.303.103.00, 950.303.113.04, 950.303.103.06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95030311304
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Proper rail to fork interference fit; maintains correct tolerances
Improved design reduces the chance of stripped threads
Uses factory torque specs and our supplied hardware
Fits all 996T, 996 & 997 GT2 & GT3 including RS.
G96/50, G96/88, G96/90, G96/93, G96/96, G97/88, G97/90, G97/92
Replaces part 996.303.115.50
Fits:
Porsche 996 Turbo / Turbo GT2 2001-05
Porsche 997 Turbo GT2 2008-09
Porsche 997 GT2 RS 2011
Porsche 996 GT3 2001-05
Porsche 997 GT3 / 997 GT3 RS 2007-11
Click 'Zoom in' for large parts diagram.
Diagram ref no 12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630311550
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII GT2 RS 2011>>
Our version uses the larger 930 turbo taper bearing and features a replaceable clutch cable bracket.
You must use differential bearing 999.059.064.00
You can use the stock studs, axle seal, o-ring and factory preload setting.
Fits Porsche 911 70-71 side cover with clutch cable bracket for pull clutch
Replaces part: 901.301.311.12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90130131112
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Also incorporated is a differential bearing oiling provision.
Fits all Porsche 996 and Boxster S 986 6 speed manual transmissions.
G86/20, G96/00, G96/01, G96/30, G96/31
Replaces part 996.301.312.00 or 986.301.312.00
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630131200
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Fits all Porsche 996 and Boxster S 986 transmissions. G86/20, G96/00, G96/01, G96/30, G96/31
Replaces part 996.302.296.00
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630229600
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Our part is machined from 30,000 psi carbon steel and replaces factory part 996.302.121.9A.
Better and more light weight than the factory machined cast part.
Note: The pass through holes have been deleted to save weight.
Fits 996T, 997T2, 996 GT2, 997 GT2RS, 996 GT3, 997 GT3, 996 GT3 CUP
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9963021219A
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
G96/50/88/90/93/96 : G97/88/90/92
Proper rail to fork interference fit; maintains correct tolerances
Improved design reduces the chance of stripped threads
Use factory torque specs and our supplied hardware
Fits all 996T, 997 GT2 & GT3 including RS and synchromesh CUP
G96/50, G96/88, G96/90, G96/93, G96/96, G96/97, G97/88, G97/96
Replaces part 996.303.116.50
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630311650
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
G96/50/88/90/93/96 : G97/88/90/92
Proper rail to fork interference fit
Clearance for oil pump drive gear
Perfect roll pin provision
Substantial surface area to shift sleeve
Maintains correct tolerances
Fits all 996T, 996 & 997 GT2 & GT3 street car. Does not fit CUP gearboxes.
G96/50, G96/88, G96/90, G96/93, G96/96, G96/97, G97/88, G97/96
Replaces part 996.303.113.51
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99630311351
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
The plastic pads are a known issue on factory forks and even more so for a race box.
Ours are designed without.
G97.01, G97.31
Part Numbers
99730311100/1 1st/2nd
99730311300/1 3rd/4th
99730311500/1 5th/6th
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99730311100
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
For use with 3 inch throw, 5/8 threaded cables. NOT compatible with OEM cables.
Fits 996, GT2 and GT3 transmissions.
G96/00, G96/01, G96/30, G96/31, G96/50, G96/88, G96/90, G96/96, G97/50, G97/88, G97/90
Replaces part 996.424.165.02
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99642416503
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
G96/30/50: G97/31
Our version is stronger and incorporates the ring gear thrust bolt to minimize deflection under load. To my knowledge the factory cover is not offered as a spare part.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634901003
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
Porsche 997 Turbo 1st and 2nd gen with G97.50 6 speed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99730131250
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Turbo 2009>>
Uses stock 996T 10 x 50 x 1.50mm CV bolts and sold in pairs.
Replaces part 996-332-209-50
Fits
G96/01/31/50
G97/50/88/90/92
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633220950
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>