do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Fabspeed
Fabspeed for Porsche
Here at Fabspeed Motorsport, we are dedicated to delivering our customers the highest quality performance upgrades with the industry’s best lifetime warranty. We have over 29 years experience designing, engineering and installing high performance Porsche exhaust systems, air intake systems and ECU tuning for the world’s most coveted exotic cars. All of our products are designed and engineered right here in Fort Washington, Pennsylvania by our very skilled and passionate fabricators
A Quick Look at Fabspeed
Fabspeed information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Fabspeed is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons people replace these parts include upgrading tired or corroded factory exhaust components, tailoring sound and response for fast-road or track use, and supporting wider tuning packages.
- Common symptoms that lead owners to inspect or change related parts include exhaust leaks, rattles, drone, heat-related fatigue, and loss of performance that may also be linked to boost or vacuum issues.
- After installation, it is sensible to refresh mounts and hardware where worn, and to carry out a careful check for leaks once everything has heat-cycled.
- Consider whether supporting ECU mapping or health checks are appropriate for your Porsche, depending on how extensive your hardware changes are.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Engine Tuning — Engine tuning parts and upgrades for Porsche are used to improve drivability, throttle response and power, or to support changes such as intake, exhaust, or forced induction. They are typically chosen once the engine is in good health, as tuning cannot compensate for underlying mechanical faults.
- Before any significant tuning work, check overall engine condition, including compression or leak-down where appropriate, fuel system health, sensor data, and that there are no boost or vacuum leaks.
- Avoid using calibration changes to hide rough running or misfires, as the mechanical root cause still needs to be addressed.
Air Filters — Air filters for Porsche protect the engine from dirt while maintaining the airflow that correct fuelling and performance depend on. Owners often replace or upgrade filters to restore airflow, support tuning work, or improve serviceability while keeping good filtration.
- Service intervals depend on use: dusty environments or frequent track days may justify more frequent inspection and cleaning or replacement.
- If using oiled performance filters, follow the manufacturer’s oiling instructions carefully to avoid contaminating sensitive airflow sensors.
Air Induction Kits — Induction kits for Porsche replace or re-route parts of the intake system to change airflow, response and sound. They are usually part of a wider tuning package and are selected to balance intake temperatures, flow and sensor stability.
- When fitting an induction kit, ensure joints and connections are well sealed to prevent unmetered air entering the engine or causing drivability issues.
- Positioning and heat management are important: shielding from hot engine-bay air helps keep intake temperatures, and therefore performance, more consistent.
Exhausts — Exhaust upgrades for Porsche are commonly chosen to replace corroded or leaking factory systems, refine the car’s sound, reduce weight or improve gas flow as part of a tuning package. The right choice depends on how the car is used and the balance you want between sound, comfort and responsiveness.
- When planning an exhaust change, consider the complete system, including catalytic converters, to keep within your local emissions and noise requirements.
- Replacing aged gaskets, clamps, mounts and rusted fixings at the same time as the exhaust usually improves fitment and reduces the chance of future leaks or rattles.
All Silencers / Mufflers — This category covers a range of Porsche silencer and muffler layouts, from standard-style replacements to sport and valved options. Selection is usually guided by corrosion or damage to existing parts, unwanted noise or drone, or a desire to change the exhaust character while staying within comfort and usage needs.
- To narrow down the correct layout, compare inlet and outlet positions, hanger locations and pipe diameters on your current system against the product details.
- When choosing between standard, sport or switchable systems, think about typical journeys and cabin noise tolerance so you end up with a sound level that suits day-to-day use.
Explore Fabspeed at Design911
View the current Fabspeed range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Fabspeed Performance Exhaust & Air Intake System with Single Quad Style Outlet Tailpipe - Flatnose turbo "
Flachbau"
Enhance the performance, sound and exclusivity of your Porsche
911 turbo Flatnose with the Fabspeed Sport Performance Package
featuring a Single Quad Style Outlet Tailpipe.
Fits:
- Porsche 911 1978-1989 3.3L Turbo (930)
Specifically configured for the iconic factory Flachbau models, this premium package combines Fabspeed's race-proven sport headers, Maxflo performance muffler with elegant single quad style outlet tailpipes and high-flow air intake system to deliver outstanding power gains, sharper throttle response and a truly exhilarating driving experience.
Engineered to maximise the performance of the legendary
turbocharged flat-six engine, this complete system improves exhaust gas
evacuation and intake airflow, allowing the factory turbocharger to spool more
efficiently while producing a deeper, more aggressive exhaust note. The
distinctive dual oval tailpipes complement the unique rear styling of the
Flachbau, providing a factory-inspired appearance with unmistakable motorsport
character.
Manufactured in the USA from premium T304 stainless steel,
every component is precision engineered for exceptional durability, performance
and fitment. Whether you're building a fast road car or a weekend track
machine, this complete system delivers the performance, sound and quality
expected from one of the world's leading Porsche performance specialists.
Kit Contents
This complete performance package includes:
- Fabspeed Stainless Steel Single Outlet Maxflo Muffler
- Fabspeed Stainless Steel Sport Headers - Includes exhaust gaskets and custom braided oil lines.
- Fabspeed High Performance Air Intake System - Supplied complete with a genuine High Performance Air Filter.
Performance Benefits
This complete system has been engineered to maximise the performance of the factory turbocharged flat-six engine.
Key performance improvements include:
- Increases output by up to 46 wheel horsepower.
- Gains of up to 33 lb-ft of wheel torque.
- Faster turbocharger spool.
- Sharper throttle response.
- Improved engine breathing.
- Reduced exhaust back pressure.
- Freer-flowing induction system.
- More engaging driving experience.
- Deep, aggressive yet refined exhaust sound.
By improving airflow into and out of the engine, the system allows the turbocharger to operate more efficiently, delivering stronger performance throughout the rev range.
Premium Engineering
Every component has been developed using motorsport-inspired engineering and premium materials.
Features include:
- CNC mandrel-bent tubing for maximum flow.
- Manufactured from premium T304 stainless steel.
- Pulse TIG welded throughout.
- 14–16 gauge construction for strength and durability.
- High-velocity 3-into-1 pyramidal merge collectors inspired by IndyCar and Formula 1 technology.
- Packed with 2000°F ceramic fibre and stainless steel wool for long-lasting sound quality.
- Hydroformed, stress-relieved Maxflo muffler body.
- Includes graphite multi-layer steel exhaust gasket.
- Custom 7/8-inch braided oil lines with Porsche-style OEM fittings.
- Aeroquip fittings with double swivel connections.
- Integrated drip accumulator.
- High-flow intake replaces the restrictive factory metal air box.
- Genuine BMC performance air filter included.
- Direct bolt-on installation.
- Covered by the Fabspeed Lifetime Warranty.
Why Upgrade Your Porsche 930 Exhaust & Intake?
The factory Porsche 930 exhaust and intake system was designed to satisfy emissions and noise regulations of its era, resulting in compromises that restrict airflow and turbocharger efficiency.
Upgrading to this complete Fabspeed system offers numerous
benefits:
- Increased horsepower and torque.
- Faster turbo response.
- Reduced turbo lag.
- Improved engine efficiency.
- Lower exhaust restriction.
- More responsive acceleration.
- Improved induction airflow.
- Significant weight reduction over many factory components.
- Enhanced exhaust tone.
- Improved engine bay appearance.
The result is a more responsive, exciting Porsche Turbo while maintaining excellent drivability.
Installation Information
Direct bolt-on installation using factory mounting locations. A minor modification to the rear bumper is required to accommodate the dual outlet exhaust configuration. After the initial heat cycle, tighten all exhaust fasteners to Porsche factory torque specifications to ensure an optimum header seal. Designed for use with the factory turbocharger. Vehicles fitted with a K27 turbocharger require a supplier modification—please contact Design911 before ordering.Professional installation is recommended to ensure optimum performance and longevity.
Why Choose Fabspeed?
Fabspeed Motorsport has spent over three decades developing some of the world's most respected Porsche performance exhaust and induction systems. Every product is designed, engineered and manufactured in the USA using premium materials and race-proven technology to deliver measurable performance gains without compromising reliability.
Known for exceptional craftsmanship, precision fitment and unmistakable sound, Fabspeed products are trusted by Porsche enthusiasts, performance specialists and racing teams around the world. Backed by a Lifetime Warranty, they represent one of the finest upgrades available for the iconic Porsche 930 Turbo.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TFLNSINGLEQ
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
.jpg?width=197&height=148&format=webp "Sport Performance Package with Single Oval Outlet Tailpipe. Porsche 911 turbo Flatnose - 93011103806, 93021103301, 93021103304")
Fabspeed Performance Exhaust & Air Intake System with Single Oval Outlet Tailpipe - Flatnose turbo "
Flachbau"
Enhance the performance, sound and exclusivity of your Porsche
911 turbo Flatnose with the Fabspeed Sport Performance Package
featuring a Single Oval Outlet Tailpipe.
Fits:
- Porsche 911 1978-1989 3.3L Turbo (930)
Specifically configured for the iconic factory Flachbau models, this premium package combines Fabspeed's race-proven sport headers, Maxflo performance muffler with elegant single oval outlet tailpipes and high-flow air intake system to deliver outstanding power gains, sharper throttle response and a truly exhilarating driving experience.
Engineered to maximise the performance of the legendary
turbocharged flat-six engine, this complete system improves exhaust gas
evacuation and intake airflow, allowing the factory turbocharger to spool more
efficiently while producing a deeper, more aggressive exhaust note. The
distinctive dual oval tailpipes complement the unique rear styling of the
Flachbau, providing a factory-inspired appearance with unmistakable motorsport
character.
Manufactured in the USA from premium T304 stainless steel,
every component is precision engineered for exceptional durability, performance
and fitment. Whether you're building a fast road car or a weekend track
machine, this complete system delivers the performance, sound and quality
expected from one of the world's leading Porsche performance specialists.
Kit Contents
This complete performance package includes:
- Fabspeed Stainless Steel Single Outlet Maxflo Muffler
- Fabspeed Stainless Steel Sport Headers - Includes exhaust gaskets and custom braided oil lines.
- Fabspeed High Performance Air Intake System - Supplied complete with a genuine High Performance Air Filter.
Performance Benefits
This complete system has been engineered to maximise the performance of the factory turbocharged flat-six engine.
Key performance improvements include:
- Increases output by up to 46 wheel horsepower.
- Gains of up to 33 lb-ft of wheel torque.
- Faster turbocharger spool.
- Sharper throttle response.
- Improved engine breathing.
- Reduced exhaust back pressure.
- Freer-flowing induction system.
- More engaging driving experience.
- Deep, aggressive yet refined exhaust sound.
By improving airflow into and out of the engine, the system allows the turbocharger to operate more efficiently, delivering stronger performance throughout the rev range.
Premium Engineering
Every component has been developed using motorsport-inspired engineering and premium materials.
Features include:
- Manufactured from premium T304 stainless steel.
- CNC mandrel-bent tubing for maximum flow.
- 14–16 gauge construction for strength and durability.
- High-velocity 3-into-1 pyramidal merge collectors inspired by IndyCar and Formula 1 technology.
- Pulse TIG welded throughout.
- Hydroformed, stress-relieved Maxflo muffler body.
- Packed with 2000°F ceramic fibre and stainless steel wool for long-lasting sound quality.
- Includes graphite multi-layer steel exhaust gasket.
- Custom 7/8-inch braided oil lines with Porsche-style OEM fittings.
- Aeroquip fittings with double swivel connections.
- Integrated drip accumulator.
- High-flow intake replaces the restrictive factory metal air box.
- Genuine BMC performance air filter included.
- Direct bolt-on installation.
- Covered by the Fabspeed Lifetime Warranty.
Why Upgrade Your Porsche 930 Exhaust & Intake?
The factory Porsche 930 exhaust and intake system was designed to satisfy emissions and noise regulations of its era, resulting in compromises that restrict airflow and turbocharger efficiency.
Upgrading to this complete Fabspeed system offers numerous
benefits:
- Increased horsepower and torque.
- Faster turbo response.
- Reduced turbo lag.
- Improved engine efficiency.
- Lower exhaust restriction.
- More responsive acceleration.
- Improved induction airflow.
- Significant weight reduction over many factory components.
- Enhanced exhaust tone.
- Improved engine bay appearance.
The result is a more responsive, exciting Porsche Turbo while maintaining excellent drivability.
Installation Information
Direct bolt-on installation using factory mounting locations. A minor modification to the rear bumper is required to accommodate the dual outlet exhaust configuration. After the initial heat cycle, tighten all exhaust fasteners to Porsche factory torque specifications to ensure an optimum header seal. Designed for use with the factory turbocharger. Vehicles fitted with a K27 turbocharger require a supplier modification—please contact Design911 before ordering.Professional installation is recommended to ensure optimum performance and longevity.
Why Choose Fabspeed?
Fabspeed Motorsport has spent over three decades developing some of the world's most respected Porsche performance exhaust and induction systems. Every product is designed, engineered and manufactured in the USA using premium materials and race-proven technology to deliver measurable performance gains without compromising reliability.
Known for exceptional craftsmanship, precision fitment and unmistakable sound, Fabspeed products are trusted by Porsche enthusiasts, performance specialists and racing teams around the world. Backed by a Lifetime Warranty, they represent one of the finest upgrades available for the iconic Porsche 930 Turbo.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TFLNSINGLEO
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
Fabspeed Performance Exhaust & Air Intake System with Single Quad Style Outlet Tailpipe
Enhance the performance and driving experience of your Porsche 911 turbo
(930) with the Fabspeed Sport Performance Package featuring a Single Quad Style Outlet Tailpipe.
Fits:
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Combining Fabspeed's race-proven sport headers, high-flow Maxflo performance muffler with a factory-inspired single quad style outlet and a high-performance air intake system, this complete package delivers substantial improvements in power, throttle response and turbocharger efficiency while maintaining the timeless appearance of the original Porsche turbo.
Designed specifically for the legendary air-cooled turbocharged flat-six engine, this complete performance package improves exhaust gas flow and induction efficiency, allowing the factory turbocharger to spool more quickly and deliver stronger performance throughout the rev range. The polished Single Quad Style Outlet Tailpipe preserves the classic Porsche 930 rear-end styling while producing a deeper, more purposeful exhaust note. Manufactured in the USA from premium T304 stainless steel, every component is precision engineered for exceptional durability, performance and fitment. Whether you're building a fast road car or a weekend track machine, this complete system delivers the performance, sound and quality expected from one of the world's leading Porsche performance specialists.
Kit Contents
This complete performance package includes:
- Fabspeed Stainless Steel Single Outlet Maxflo Muffler
- Fabspeed Stainless Steel Sport Headers - Includes exhaust gaskets and custom braided oil lines.
- Fabspeed High Performance Air Intake System - Supplied complete with a genuine High Performance Air Filter.
Performance Benefits
This complete system has been engineered to maximise the performance of the factory turbocharged flat-six engine.
Key performance improvements include:
- Increases output by up to 46 wheel horsepower.
- Gains of up to 33 lb-ft of wheel torque.
- Faster turbocharger spool.
- Sharper throttle response.
- Improved engine breathing.
- Reduced exhaust back pressure.
- Freer-flowing induction system.
- More engaging driving experience.
- Deep, aggressive yet refined exhaust sound.
By improving airflow into and out of the engine, the system allows the turbocharger to operate more efficiently, delivering stronger performance throughout the rev range.
Premium Engineering
Every component has been developed using motorsport-inspired engineering and premium materials.
Features include:
- Manufactured from premium T304 stainless steel.
- CNC mandrel-bent tubing for maximum flow.
- 14–16 gauge construction for strength and durability.
- High-velocity 3-into-1 pyramidal merge collectors inspired by IndyCar and Formula 1 technology.
- Pulse TIG welded throughout.
- Hydroformed, stress-relieved Maxflo muffler body.
- Packed with 2000°F ceramic fibre and stainless steel wool for long-lasting sound quality.
- Includes graphite multi-layer steel exhaust gasket.
- Custom 7/8-inch braided oil lines with Porsche-style OEM fittings.
- Aeroquip fittings with double swivel connections.
- Integrated drip accumulator.
- High-flow intake replaces the restrictive factory metal air box.
- Genuine BMC performance air filter included.
- Direct bolt-on installation.
- Covered by the Fabspeed Lifetime Warranty.
Why Upgrade Your Porsche 930 Exhaust & Intake?
The factory Porsche 930 exhaust and intake system was designed to satisfy emissions and noise regulations of its era, resulting in compromises that restrict airflow and turbocharger efficiency.
Upgrading to this complete Fabspeed system offers numerous
benefits:
- Increased horsepower and torque.
- Faster turbo response.
- Reduced turbo lag.
- Improved engine efficiency.
- Lower exhaust restriction.
- More responsive acceleration.
- Improved induction airflow.
- Significant weight reduction over many factory components.
- Enhanced exhaust tone.
- Improved engine bay appearance.
The result is a more responsive, exciting Porsche Turbo while maintaining excellent drivability.
Installation Information
Direct bolt-on installation using factory mounting locations. A minor modification to the rear bumper is required to accommodate the dual outlet exhaust configuration. After the initial heat cycle, tighten all exhaust fasteners to Porsche factory torque specifications to ensure an optimum header seal. Designed for use with the factory turbocharger. Vehicles fitted with a K27 turbocharger require a supplier modification—please contact Design911 before ordering.Professional installation is recommended to ensure optimum performance and longevity.
Why Choose Fabspeed?
Fabspeed Motorsport has spent over three decades developing some of the world's most respected Porsche performance exhaust and induction systems. Every product is designed, engineered and manufactured in the USA using premium materials and race-proven technology to deliver measurable performance gains without compromising reliability.
Known for exceptional craftsmanship, precision fitment and unmistakable sound, Fabspeed products are trusted by Porsche enthusiasts, performance specialists and racing teams around the world. Backed by a Lifetime Warranty, they represent one of the finest upgrades available for the iconic Porsche 930 Turbo.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TSTDSINGLEQ
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fabspeed Performance Exhaust & Air Intake System with Single Oval Outlet Tailpipe
Enhance the performance and driving experience of your Porsche 911 Turbo
(930) with the Fabspeed Sport Performance Package featuring a Single Oval
Outlet Tailpipe.
Fits:
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Combining Fabspeed's race-proven sport headers, high-flow Maxflo performance muffler with a factory-inspired single oval outlet and a high-performance air intake system, this complete package delivers substantial improvements in power, throttle response and turbocharger efficiency while maintaining the timeless appearance of the original Porsche turbo.
Designed specifically for the legendary air-cooled turbocharged flat-six engine, this complete performance package improves exhaust gas flow and induction efficiency, allowing the factory turbocharger to spool more quickly and deliver stronger performance throughout the rev range. The polished Single Oval Outlet Tailpipe preserves the classic Porsche 930 rear-end styling while producing a deeper, more purposeful exhaust note. Manufactured in the USA from premium T304 stainless steel, every component is precision engineered for exceptional durability, performance and fitment. Whether you're building a fast road car or a weekend track machine, this complete system delivers the performance, sound and quality expected from one of the world's leading Porsche performance specialists.
Kit Contents
This complete performance package includes:
- Fabspeed Stainless Steel Single Outlet Maxflo Muffler
- Fabspeed Stainless Steel Sport Headers - Includes exhaust gaskets and custom braided oil lines.
- Fabspeed High Performance Air Intake System - Supplied complete with a genuine High Performance Air Filter.
Performance Benefits
This complete system has been engineered to maximise the performance of the factory turbocharged flat-six engine.
Key performance improvements include:
- Increases output by up to 46 wheel horsepower.
- Gains of up to 33 lb-ft of wheel torque.
- Faster turbocharger spool.
- Sharper throttle response.
- Improved engine breathing.
- Reduced exhaust back pressure.
- Freer-flowing induction system.
- More engaging driving experience.
- Deep, aggressive yet refined exhaust sound.
By improving airflow into and out of the engine, the system allows the turbocharger to operate more efficiently, delivering stronger performance throughout the rev range.
Premium Engineering
Every component has been developed using motorsport-inspired engineering and premium materials.
Features include:
- Manufactured from premium T304 stainless steel.
- CNC mandrel-bent tubing for maximum flow.
- 14–16 gauge construction for strength and durability.
- High-velocity 3-into-1 pyramidal merge collectors inspired by IndyCar and Formula 1 technology.
- Pulse TIG welded throughout.
- Hydroformed, stress-relieved Maxflo muffler body.
- Packed with 2000°F ceramic fibre and stainless steel wool for long-lasting sound quality.
- Includes graphite multi-layer steel exhaust gasket.
- Custom 7/8-inch braided oil lines with Porsche-style OEM fittings.
- Aeroquip fittings with double swivel connections.
- Integrated drip accumulator.
- High-flow intake replaces the restrictive factory metal air box.
- Genuine BMC performance air filter included.
- Direct bolt-on installation.
- Covered by the Fabspeed Lifetime Warranty.
Why Upgrade Your Porsche 930 Exhaust & Intake?
The factory Porsche 930 exhaust and intake system was designed to satisfy emissions and noise regulations of its era, resulting in compromises that restrict airflow and turbocharger efficiency.
Upgrading to this complete Fabspeed system offers numerous
benefits:
- Increased horsepower and torque.
- Faster turbo response.
- Reduced turbo lag.
- Improved engine efficiency.
- Lower exhaust restriction.
- More responsive acceleration.
- Improved induction airflow.
- Significant weight reduction over many factory components.
- Enhanced exhaust tone.
- Improved engine bay appearance.
The result is a more responsive, exciting Porsche Turbo while maintaining excellent drivability.
Installation Information
Direct bolt-on installation using factory mounting locations. A minor modification to the rear bumper is required to accommodate the dual outlet exhaust configuration. After the initial heat cycle, tighten all exhaust fasteners to Porsche factory torque specifications to ensure an optimum header seal. Designed for use with the factory turbocharger. Vehicles fitted with a K27 turbocharger require a supplier modification—please contact Design911 before ordering.Professional installation is recommended to ensure optimum performance and longevity.
Why Choose Fabspeed?
Fabspeed Motorsport has spent over three decades developing some of the world's most respected Porsche performance exhaust and induction systems. Every product is designed, engineered and manufactured in the USA using premium materials and race-proven technology to deliver measurable performance gains without compromising reliability.
Known for exceptional craftsmanship, precision fitment and unmistakable sound, Fabspeed products are trusted by Porsche enthusiasts, performance specialists and racing teams around the world. Backed by a Lifetime Warranty, they represent one of the finest upgrades available for the iconic Porsche 930 Turbo.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TSTDSINGLEO
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fabspeed Performance Exhaust & Air Intake System with Dual Quad Style Outlet Tailpipes - Flatnose turbo "
Flachbau"
Enhance the performance, sound and exclusivity of your Porsche
911 turbo Flatnose with the Fabspeed Sport Performance Package
featuring Dual Quad Style Outlet Tailpipes.
Fits:
- Porsche 911 1978-1989 3.3L Turbo (930)
Specifically configured for the iconic factory Flachbau models, this premium package combines Fabspeed's race-proven sport headers, Maxflo performance muffler with elegant dual quad style outlet tailpipes and high-flow air intake system to deliver outstanding power gains, sharper throttle response and a truly exhilarating driving experience.
Engineered to maximise the performance of the legendary
turbocharged flat-six engine, this complete system improves exhaust gas
evacuation and intake airflow, allowing the factory turbocharger to spool more
efficiently while producing a deeper, more aggressive exhaust note. The
distinctive dual oval tailpipes complement the unique rear styling of the
Flachbau, providing a factory-inspired appearance with unmistakable motorsport
character.
Manufactured in the USA from premium T304 stainless steel,
every component is precision engineered for exceptional durability, performance
and fitment. Whether you're building a fast road car or a weekend track
machine, this complete system delivers the performance, sound and quality
expected from one of the world's leading Porsche performance specialists.
Kit Contents
This complete performance package includes:
- Fabspeed Stainless Steel Dual Outlet Maxflo Muffler
- Fabspeed Stainless Steel Sport Headers - Includes exhaust gaskets and custom braided oil lines.
- Fabspeed High Performance Air Intake System - Supplied complete with a genuine High Performance Air Filter.
Performance Benefits
This complete system has been engineered to maximise the performance of the factory turbocharged flat-six engine.
Key performance improvements include:
- Increases output by up to 46 wheel horsepower.
- Gains of up to 33 lb-ft of wheel torque.
- Faster turbocharger spool.
- Sharper throttle response.
- Improved engine breathing.
- Reduced exhaust back pressure.
- Freer-flowing induction system.
- More engaging driving experience.
- Deep, aggressive yet refined exhaust sound.
By improving airflow into and out of the engine, the system allows the turbocharger to operate more efficiently, delivering stronger performance throughout the rev range.
Premium Engineering
Every component has been developed using motorsport-inspired engineering and premium materials.
Features include:
- Manufactured from premium T304 stainless steel.
- CNC mandrel-bent tubing for maximum flow.
- 14–16 gauge construction for strength and durability.
- High-velocity 3-into-1 pyramidal merge collectors inspired by IndyCar and Formula 1 technology.
- Pulse TIG welded throughout.
- Hydroformed, stress-relieved Maxflo muffler body.
- Packed with 2000°F ceramic fibre and stainless steel wool for long-lasting sound quality.
- Includes graphite multi-layer steel exhaust gasket.
- Custom 7/8-inch braided oil lines with Porsche-style OEM fittings.
- Aeroquip fittings with double swivel connections.
- Integrated drip accumulator.
- High-flow intake replaces the restrictive factory metal air box.
- Genuine BMC performance air filter included.
- Direct bolt-on installation.
- Covered by the Fabspeed Lifetime Warranty.
Why Upgrade Your Porsche 930 Exhaust & Intake?
The factory Porsche 930 exhaust and intake system was designed to satisfy emissions and noise regulations of its era, resulting in compromises that restrict airflow and turbocharger efficiency.
Upgrading to this complete Fabspeed system offers numerous
benefits:
- Increased horsepower and torque.
- Faster turbo response.
- Reduced turbo lag.
- Improved engine efficiency.
- Lower exhaust restriction.
- More responsive acceleration.
- Improved induction airflow.
- Significant weight reduction over many factory components.
- Enhanced exhaust tone.
- Improved engine bay appearance.
The result is a more responsive, exciting Porsche Turbo while maintaining excellent drivability.
Installation Information
Direct bolt-on installation using factory mounting locations. A minor modification to the rear bumper is required to accommodate the dual outlet exhaust configuration. After the initial heat cycle, tighten all exhaust fasteners to Porsche factory torque specifications to ensure an optimum header seal. Designed for use with the factory turbocharger. Vehicles fitted with a K27 turbocharger require a supplier modification—please contact Design911 before ordering.Professional installation is recommended to ensure optimum performance and longevity.
Why Choose Fabspeed?
Fabspeed Motorsport has spent over three decades developing some of the world's most respected Porsche performance exhaust and induction systems. Every product is designed, engineered and manufactured in the USA using premium materials and race-proven technology to deliver measurable performance gains without compromising reliability.
Known for exceptional craftsmanship, precision fitment and unmistakable sound, Fabspeed products are trusted by Porsche enthusiasts, performance specialists and racing teams around the world. Backed by a Lifetime Warranty, they represent one of the finest upgrades available for the iconic Porsche 930 Turbo.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TFLNDUALQ
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
Fabspeed Performance Exhaust & Air Intake System with Dual Oval Outlet Tailpipes - Flatnose turbo "
Flachbau"
Enhance the performance, sound and exclusivity of your Porsche
911 turbo Flatnose with the Fabspeed Sport Performance Package
featuring Dual Oval Outlet Tailpipes. Specifically configured for the iconic
factory Flachbau models, this premium package combines Fabspeed's race-proven
sport headers, Maxflo performance muffler with elegant dual oval outlet
tailpipes and high-flow air intake system to deliver outstanding power gains,
sharper throttle response and a truly exhilarating driving experience.
Fits:
- Porsche 911 1978-1989 3.3L Turbo (930)
Engineered to maximise the performance of the legendary
turbocharged flat-six engine, this complete system improves exhaust gas
evacuation and intake airflow, allowing the factory turbocharger to spool more
efficiently while producing a deeper, more aggressive exhaust note. The
distinctive dual oval tailpipes complement the unique rear styling of the
Flachbau, providing a factory-inspired appearance with unmistakable motorsport
character.
Manufactured in the USA from premium T304 stainless steel,
every component is precision engineered for exceptional durability, performance
and fitment. Whether you're building a fast road car or a weekend track
machine, this complete system delivers the performance, sound and quality
expected from one of the world's leading Porsche performance specialists.
Kit Contents
This complete performance package includes:
- Fabspeed Stainless Steel Dual Outlet Maxflo Muffler
- Fabspeed Stainless Steel Sport Headers - Includes exhaust gaskets and custom braided oil lines.
- Fabspeed High Performance Air Intake System - Supplied complete with a genuine High Performance Air Filter.
Performance Benefits
This complete system has been engineered to maximise the performance of the factory turbocharged flat-six engine.
Key performance improvements include:
- Increases output by up to 46 wheel horsepower.
- Gains of up to 33 lb-ft of wheel torque.
- Faster turbocharger spool.
- Sharper throttle response.
- Improved engine breathing.
- Reduced exhaust back pressure.
- Freer-flowing induction system.
- More engaging driving experience.
- Deep, aggressive yet refined exhaust sound.
By improving airflow into and out of the engine, the system allows the turbocharger to operate more efficiently, delivering stronger performance throughout the rev range.
Premium Engineering
Every component has been developed using motorsport-inspired engineering and premium materials.
Features include:
- Manufactured from premium T304 stainless steel.
- CNC mandrel-bent tubing for maximum flow.
- 14–16 gauge construction for strength and durability.
- High-velocity 3-into-1 pyramidal merge collectors inspired by IndyCar and Formula 1 technology.
- Pulse TIG welded throughout.
- Hydroformed, stress-relieved Maxflo muffler body.
- Packed with 2000°F ceramic fibre and stainless steel wool for long-lasting sound quality.
- Includes graphite multi-layer steel exhaust gasket.
- Custom 7/8-inch braided oil lines with Porsche-style OEM fittings.
- Aeroquip fittings with double swivel connections.
- Integrated drip accumulator.
- High-flow intake replaces the restrictive factory metal air box.
- Genuine BMC performance air filter included.
- Direct bolt-on installation.
- Covered by the Fabspeed Lifetime Warranty.
Why Upgrade Your Porsche 930 Exhaust & Intake?
The factory Porsche 930 exhaust and intake system was designed to satisfy emissions and noise regulations of its era, resulting in compromises that restrict airflow and turbocharger efficiency.
Upgrading to this complete Fabspeed system offers numerous
benefits:
- Increased horsepower and torque.
- Faster turbo response.
- Reduced turbo lag.
- Improved engine efficiency.
- Lower exhaust restriction.
- More responsive acceleration.
- Improved induction airflow.
- Significant weight reduction over many factory components.
- Enhanced exhaust tone.
- Improved engine bay appearance.
The result is a more responsive, exciting Porsche Turbo while maintaining excellent drivability.
Installation Information
Direct bolt-on installation using factory mounting locations. A minor modification to the rear bumper is required to accommodate the dual outlet exhaust configuration. After the initial heat cycle, tighten all exhaust fasteners to Porsche factory torque specifications to ensure an optimum header seal. Designed for use with the factory turbocharger. Vehicles fitted with a K27 turbocharger require a supplier modification—please contact Design911 before ordering.Professional installation is recommended to ensure optimum performance and longevity.
Why Choose Fabspeed?
Fabspeed Motorsport has spent over three decades developing some of the world's most respected Porsche performance exhaust and induction systems. Every product is designed, engineered and manufactured in the USA using premium materials and race-proven technology to deliver measurable performance gains without compromising reliability.
Known for exceptional craftsmanship, precision fitment and unmistakable sound, Fabspeed products are trusted by Porsche enthusiasts, performance specialists and racing teams around the world. Backed by a Lifetime Warranty, they represent one of the finest upgrades available for the iconic Porsche 930 Turbo.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TFLNDUALO
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
Fabspeed Performance Exhaust & Air Intake System with Dual Quad Style Outlet Tailpipes
Take your classic Porsche 911 turbo to the next level with the Fabspeed Sport Performance Package featuring Dual Quad Style Outlet Tailpipes. Combining Fabspeed's renowned sport headers, high-flow Maxflo muffler with distinctive quad outlet tailpipes and performance air intake system, this complete package is designed to unlock additional horsepower, improve turbocharger efficiency and deliver an unmistakable motorsport-inspired soundtrack.
Fits:
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Designed as a complete bolt-on upgrade for the factory turbocharger, this package improves exhaust gas flow, reduces intake restriction and allows the turbocharger to spool more efficiently. The result is stronger acceleration, sharper throttle response and an unmistakable flat-six exhaust note that perfectly complements the legendary Porsche turbo.
Manufactured in the USA from premium T304 stainless steel, every component is precision engineered for exceptional durability, performance and fitment. Whether you're building a fast road car or a weekend track machine, this complete system delivers the performance, sound and quality expected from one of the world's leading Porsche performance specialists.
Kit Contents
This complete performance package includes:
- Fabspeed Stainless Steel Dual Outlet Maxflo Muffler
- Fabspeed Stainless Steel Sport Headers - Includes exhaust gaskets and custom braided oil lines.
- Fabspeed High Performance Air Intake System - Supplied complete with a genuine High Performance Air Filter.
Performance Benefits
This complete system has been engineered to maximise the performance of the factory turbocharged flat-six engine.
Key performance improvements include:
- Increases output by up to 46 wheel horsepower.
- Gains of up to 33 lb-ft of wheel torque.
- Faster turbocharger spool.
- Sharper throttle response.
- Improved engine breathing.
- Reduced exhaust back pressure.
- Freer-flowing induction system.
- More engaging driving experience.
- Deep, aggressive yet refined exhaust sound.
By improving airflow into and out of the engine, the system allows the turbocharger to operate more efficiently, delivering stronger performance throughout the rev range.
Premium Engineering
Every component has been developed using motorsport-inspired engineering and premium materials.
Features include:
- Manufactured from premium T304 stainless steel.
- CNC mandrel-bent tubing for maximum flow.
- 14–16 gauge construction for strength and durability.
- High-velocity 3-into-1 pyramidal merge collectors inspired by IndyCar and Formula 1 technology.
- Pulse TIG welded throughout.
- Hydroformed, stress-relieved Maxflo muffler body.
- Packed with 2000°F ceramic fibre and stainless steel wool for long-lasting sound quality.
- Includes graphite multi-layer steel exhaust gasket.
- Custom 7/8-inch braided oil lines with Porsche-style OEM fittings.
- Aeroquip fittings with double swivel connections.
- Integrated drip accumulator.
- High-flow intake replaces the restrictive factory metal air box.
- Genuine BMC performance air filter included.
- Direct bolt-on installation.
- Covered by the Fabspeed Lifetime Warranty.
Why Upgrade Your Porsche 930 Exhaust & Intake?
The factory Porsche 930 exhaust and intake system was designed to satisfy emissions and noise regulations of its era, resulting in compromises that restrict airflow and turbocharger efficiency.
Upgrading to this complete Fabspeed system offers numerous
benefits:
- Increased horsepower and torque.
- Faster turbo response.
- Reduced turbo lag.
- Improved engine efficiency.
- Lower exhaust restriction.
- More responsive acceleration.
- Improved induction airflow.
- Significant weight reduction over many factory components.
- Enhanced exhaust tone.
- Improved engine bay appearance.
The result is a more responsive, exciting Porsche Turbo while maintaining excellent drivability.
Installation Information
Direct bolt-on installation using factory mounting locations. A minor modification to the rear bumper is required to accommodate the dual outlet exhaust configuration. After the initial heat cycle, tighten all exhaust fasteners to Porsche factory torque specifications to ensure an optimum header seal. Designed for use with the factory turbocharger. Vehicles fitted with a K27 turbocharger require a supplier modification—please contact Design911 before ordering.Professional installation is recommended to ensure optimum performance and longevity.
Why Choose Fabspeed?
Fabspeed Motorsport has spent over three decades developing some of the world's most respected Porsche performance exhaust and induction systems. Every product is designed, engineered and manufactured in the USA using premium materials and race-proven technology to deliver measurable performance gains without compromising reliability.
Known for exceptional craftsmanship, precision fitment and unmistakable sound, Fabspeed products are trusted by Porsche enthusiasts, performance specialists and racing teams around the world. Backed by a Lifetime Warranty, they represent one of the finest upgrades available for the iconic Porsche 930 Turbo.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TSTDDUALQ
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fabspeed Performance Exhaust & Air Intake System with Dual Oval Outlet Tailpipes
Unlock the true performance potential of your classic Porsche
911 turbo with this complete Fabspeed Performance Exhaust & Air
Intake System kit. Engineered to deliver significant gains in horsepower, torque
and throttle response, this premium package combines Fabspeed's renowned
stainless steel exhaust technology with a high-flow induction system to
transform both the performance and character of your turbo.
Fits:
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Designed as a complete bolt-on upgrade for the factory turbocharger, this package improves exhaust gas flow, reduces intake restriction and allows the turbocharger to spool more efficiently. The result is stronger acceleration, sharper throttle response and an unmistakable flat-six exhaust note that perfectly complements the legendary Porsche turbo.
Manufactured in the USA from premium T304 stainless steel, every component is precision engineered for exceptional durability, performance and fitment. Whether you're building a fast road car or a weekend track machine, this complete system delivers the performance, sound and quality expected from one of the world's leading Porsche performance specialists.
Kit Contents
This complete performance package includes:
- Fabspeed Stainless Steel Dual Outlet Maxflo Muffler
- Fabspeed Stainless Steel Sport Headers - Includes exhaust gaskets and custom braided oil lines.
- Fabspeed High Performance Air Intake System - Supplied complete with a genuine High Performance Air Filter.
Performance Benefits
This complete system has been engineered to maximise the performance of the factory turbocharged flat-six engine.
Key performance improvements include:
- Increases output by up to 46 wheel horsepower.
- Gains of up to 33 lb-ft of wheel torque.
- Faster turbocharger spool.
- Sharper throttle response.
- Improved engine breathing.
- Reduced exhaust back pressure.
- Freer-flowing induction system.
- More engaging driving experience.
- Deep, aggressive yet refined exhaust sound.
By improving airflow into and out of the engine, the system allows the turbocharger to operate more efficiently, delivering stronger performance throughout the rev range.
Premium Engineering
Every component has been developed using motorsport-inspired engineering and premium materials.
Features include:
- Manufactured from premium T304 stainless steel.
- CNC mandrel-bent tubing for maximum flow.
- 14–16 gauge construction for strength and durability.
- High-velocity 3-into-1 pyramidal merge collectors inspired by IndyCar and Formula 1 technology.
- Pulse TIG welded throughout.
- Hydroformed, stress-relieved Maxflo muffler body.
- Packed with 2000°F ceramic fibre and stainless steel wool for long-lasting sound quality.
- Includes graphite multi-layer steel exhaust gasket.
- Custom 7/8-inch braided oil lines with Porsche-style OEM fittings.
- Aeroquip fittings with double swivel connections.
- Integrated drip accumulator.
- High-flow intake replaces the restrictive factory metal air box.
- Genuine BMC performance air filter included.
- Direct bolt-on installation.
- Covered by the Fabspeed Lifetime Warranty.
Why Upgrade Your Porsche 930 Exhaust & Intake?
The factory Porsche 930 exhaust and intake system was designed to satisfy emissions and noise regulations of its era, resulting in compromises that restrict airflow and turbocharger efficiency.
Upgrading to this complete Fabspeed system offers numerous
benefits:
- Increased horsepower and torque.
- Faster turbo response.
- Reduced turbo lag.
- Improved engine efficiency.
- Lower exhaust restriction.
- More responsive acceleration.
- Improved induction airflow.
- Significant weight reduction over many factory components.
- Enhanced exhaust tone.
- Improved engine bay appearance.
The result is a more responsive, exciting Porsche Turbo while maintaining excellent drivability.
Installation Information
Direct bolt-on installation using factory mounting locations. A minor modification to the rear bumper is required to accommodate the dual outlet exhaust configuration. After the initial heat cycle, tighten all exhaust fasteners to Porsche factory torque specifications to ensure an optimum header seal. Designed for use with the factory turbocharger. Vehicles fitted with a K27 turbocharger require a supplier modification—please contact Design911 before ordering.Professional installation is recommended to ensure optimum performance and longevity.
Why Choose Fabspeed?
Fabspeed Motorsport has spent over three decades developing some of the world's most respected Porsche performance exhaust and induction systems. Every product is designed, engineered and manufactured in the USA using premium materials and race-proven technology to deliver measurable performance gains without compromising reliability.
Known for exceptional craftsmanship, precision fitment and unmistakable sound, Fabspeed products are trusted by Porsche enthusiasts, performance specialists and racing teams around the world. Backed by a Lifetime Warranty, they represent one of the finest upgrades available for the iconic Porsche 930 Turbo.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911TSTDDUALO
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Description Shipping & Returns True highflow slip on high performance exhaust system. Improves power, exhaust tone, and saves weight by replacing the factory OEM heavy restrictive stamped mufflers.
Fabspeed Motorsport USA was the 1st company in the World to design and perfect Porsche Macan exhaust systems. Fabspeed is the brand to trust as we have the most experience with these cars.
FEATURES:
• Fits all Porsche Macan 3.0L V6 Twin Turbo (S / GTS), 3.6L Twin Turbo (Turbo) 2014 - 2018
• Improves sportscar sound and driving experience. Puts a major grin and smile on your face.
• Saves 17lbs versus the factory exhaust system
• Includes Fabspeed's premium dual wall carbon fiber tips for an upgraded performance aesthetic
• Full system constructed from T304L stainless steel for maximum performance and durability
• Includes all clamps and required hardware for final bolt-on installation
• Backed by Fabspeed's Lifetime Warranty
NOTE: Bolt-On Installation - Minor cutting required at factory exhaust break point to install the Fabspeed product (Reference Dimple Locations on OEM)
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR14MCNV6RMB
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Shop Securely
12 Month Warranty
Worldwide Delivery
Resonated Rear Sports Exhaust System
Upgrade your Porsche Macan 2.0 with a refined yet sporty exhaust note using this high-performance resonated rear sports exhaust system. Designed as a slip-on upgrade, it replaces the restrictive OEM mufflers with a high-flow, lightweight system that enhances both sound and performance.
This system delivers a deeper, richer Porsche tone while
maintaining everyday usability. Compared to the standard exhaust, you’ll
experience improved throttle response, reduced weight, and a more engaging
driving feel—without excessive noise.
Fits:
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
Sound Characteristics (Resonated)
The resonated version offers a balanced upgrade in sound:
• Noticeable increase in volume over stock
• Deeper, sportier exhaust tone
• Controlled pops and gurgles on throttle lift
• Subtle turbo spool enhancement
• Reduced cabin drone for daily driving comfort
Resonated vs Non-Resonated – What’s the Difference?
Resonated Exhaust
• Includes a resonator to filter sound frequencies
• Produces a smoother, more refined tone
• Less cabin drone and reduced harshness
• Ideal for daily driving and long journeys
Non-Resonated Exhaust
• No sound filtering component
• Louder and more aggressive
• More pronounced pops, crackles, and turbo noise
• Raw, track-inspired sound
This resonated system is perfect for drivers who want a sportier exhaust note without sacrificing comfort.
Key Features
• Fits Porsche Macan 2.0L (Base & T models) 2018+
• Resonated design for refined sound performance
• High-flow slip-on rear exhaust system
• Choice of quad tips: Carbon Fibre, Polished, or Satin Black
• Saves approx. 17lbs / 7.7kg vs OEM mufflers
• Constructed from mandrel-bent T304L stainless steel
• Significantly less restrictive than factory exhaust
• Designed using 3D scanning for perfect OEM fitment
• No check engine light (CEL)
• No ECU tune required
• Simple bolt-on installation (no welding required)
• Durable, corrosion-resistant construction
Performance Benefits
Improved Power Delivery
Reduced back pressure allows better airflow and throttle response.
Weight Reduction
Lighter than OEM mufflers for improved handling dynamics.
Refined Driving Experience
Balanced sound upgrade without excessive noise.
Enhanced Efficiency
Optimised exhaust flow supports engine performance and efficiency.
Installation Notes
• Direct bolt-on installation
• Minor cutting required at OEM exhaust break point (refer to factory dimple
locations)
• No welding required
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR19MCN2LRMB
The product you are viewing cross references to these numbers
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
Shop Securely
12 Month Warranty
Worldwide Delivery
Non-Resonated Rear Sports Exhaust System
Unleash a true performance exhaust note from your Porsche Macan 2.0ltr with this non-resonated rear sports exhaust system. Designed as a high-flow slip-on upgrade, this system replaces the heavy, restrictive OEM mufflers with a lightweight, free-flowing alternative that enhances both sound and performance.
This non-resonated version is engineered for maximum
acoustic impact, delivering a louder, deeper, and more aggressive Porsche
exhaust tone. Expect sharper pops and gurgles on gear changes and throttle
lift, along with more pronounced turbo spool—perfect for drivers who want a
more engaging and sporty driving experience.
Fits:
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
Sound Characteristics (Non-Resonated)
This system delivers an amplified exhaust presence with:
• Increased volume over stock
• Deep, aggressive exhaust tone
• Enhanced pops and crackles on overrun
• Noticeable turbo spool sound
• Raw, motorsport-inspired character
Resonated vs Non-Resonated – What’s the Difference?
Resonated Exhaust
• Includes a resonator to filter sound frequencies
• Produces a smoother, more refined tone
• Less cabin drone and reduced harshness
• Ideal for daily driving and long journeys
Non-Resonated Exhaust
• No sound filtering component
• Louder and more aggressive
• More pronounced pops, crackles, and turbo noise
• Raw, track-inspired sound
Key Features
• Fits Porsche Macan 2.0ltr (Base & T models) 2018+
• Non-resonated design for maximum sound output
• High-flow slip-on rear exhaust system
• Choice of quad tips: Carbon Fibre, Polished, or Satin Black
• Saves approx. 17lbs / 7.7 kg vs OEM mufflers
• Mandrel-bent T304L stainless steel construction
• Significantly less restrictive than factory exhaust
• Designed using 3D scanning for OEM-perfect fitment
• No check engine light (CEL)
• No ECU tune required
• Simple bolt-on installation (no welding required)
• Corrosion-resistant and long-lasting
Performance Benefits
Improved Power & Throttle Response
Reduced back pressure allows the engine to breathe more efficiently.
Weight Reduction
Lighter construction improves overall vehicle dynamics.
Enhanced Driving Experience
Aggressive sound profile transforms the character of the vehicle.
Optimised Efficiency
Improved exhaust flow supports better engine performance.
Installation Notes
• Direct bolt-on system
• Minor cutting required at OEM exhaust break point (refer to factory dimple
locations)
• No welding required
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR19MCN2L
The product you are viewing cross references to these numbers
- Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
- Porsche 95B.3 Macan Petrol 2.0L (265Bhp) 2022>>
Shop Securely
12 Month Warranty
Worldwide Delivery
Direct bolt-on replacement for the factory air box providing increased airflow and power. T
The design of this airbox cover was inspired by factory Porsche Cup Cars. After much on-track testing done by Fabspeed's Owner on his 993 RSR, he found that using this open filter design netted the best power results, with more flow and cool intake temps.
SOUND:
The factory Carrera airbox is designed to muffle the induction note of the engine to keep it out of the cabin. This airbox lets all that glorious air cooled flat six induction growl into the cabin.
POWER:
With just this modification we saw a 6whp increase over stock thanks to increased airflow.
FEATURES:
• Fits all late model Porsche 911 Carrera 3.2L vehihles (1984-1989)
• Adds 6 whp and increases throttle response
• Direct replacement for the OEM front cover lid to improve the induction through an open style intake system
• Compatible with the BMC Air Filter upgrade
• Simple 5 minute DIY installation, no cutting required
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR911ABX32S
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=197&height=148&format=webp "Fabspeed Single Wall Oval Bolt-On Tips. Porsche 993 C2S / C4S 1994-1998 (Wide Body) - FS.POR.993.SWOTW, FS.POR.993.SWOTWBBR, FS.POR.993.SWOTWBP, FS.POR.993.SWOTWBB, 9311125157, 9311125152, 99311198102, 99311198202, 99322093903S, 99311125156, 99311125257, 99311125151, 99311125251 - FS.POR.993.SWOTW, FS.POR.993.SWOTWBBR, FS.POR.993.SWOTWBP, FS.POR.993.SWOTWBB")
Upgrade the rear aesthetic of your 993 Carrera wide-body with these premium bolt-on oval exhaust tips. Designed specifically for the wide-body 1994-1998 models (C2S / C4S), these single-wall, slash-cut tips are crafted from high-grade T304L stainless steel and come in various finishes (polished stainless steel, brushed stainless steel, satin black). Installation is direct bolt-on – no welding required – retaining OEM mounting hardware.
Fits:
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
What This Product Does:
- These tips replace the factory exhaust outlet tips on your 993 wide-body, delivering a refined, upgraded rear-end aesthetic: an oval single-wall slash-cut design that enhances the visual presence.
- While the performance change may be minimal (since they are tips rather than a full exhaust system), the finish, build quality and fitment elevate the appearance and help maintain corrosion resistance and durability of the outlet area.
- The “bolt-on” nature of the tips means installation is relatively straightforward compared to full exhaust system upgrades — an attractive feature for builders/restorers.
Fitment & Considerations:
- Ensure your car is the wide-body 993 version (C2S, C4S) — the narrow body vs wide body distinction affects tip size/clearance/appearance.
- Choose your finish carefully (polished, brushed, black) to match your rear bumper and overall aesthetic.
- When installing, reuse the factory ball-joint clamps/donuts to secure proper fitment.
- Double-check clearance of the tips relative to the bumper, especially aftermarket or modified bumpers.
Why These Upgrades Matter:
- Wide-body 993 Carreras (C2S, C4S) have a different rear bumper/exhaust exit configuration compared to narrow-body versions; this version of the tips is sized and styled for the wide-body variant, ensuring proper proportions and fitment.
- If your factory tips are worn, corroded, mismatched or simply not matching your build aesthetic, these tips offer a high-quality, stylish solution.
- For restoration or upgrade projects, choosing a trusted brand like Fabspeed aligns with performance-brand hardware and can support build quality perception.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FS.POR.993.SWOTW
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg?width=197&height=148&format=webp "Fabspeed Single Wall Oval Bolt-On Tips. Porsche 993 Carrera 1994-1998 (Narrow Body) - FS.POR.993.SWOTN, FS.POR.993.SWOTNBBR, FS.POR.993.SWOTNBP, FS.POR.993.SWOTNBB, 99311198200, 99311198100 - FS.POR.993.SWOTN, FS.POR.993.SWOTNBBR, FS.POR.993.SWOTNBP, FS.POR.993.SWOTNBB")
Upgrade the rear aesthetic of your Porsche 993 Carrera with these premium bolt-on oval exhaust tips. Designed specifically for single-wall installation on narrow-body 1994-1998 993 Carreras, these tips feature hand-crafted slash-cut ends, superior T304L stainless construction, and simple direct-fit installation. Available in brushed stainless steel, polished stainless steel and satin black finishes, they offer a refined yet sporty appearance while retaining factory bolt-on ease.
Fits:
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
Fits all Porsche 993 Carrera vehicles 1994-1998 non-turbo cars worldwide.
Note: Narrow-body 993 exhaust tips will fit all 993 Twin Turbo cars but tip length will be slightly longer than stock, which keeps carbon soot and heat away from 993TT's rear bumper cover.
Specify 993 narrow-body 993 C2, 993 C4, 993 RS, 993RS Clubsport.
What This Product Does:
- They replace the factory exhaust outlet tips, offering a visual upgrade: an oval slash-cut design, single-wall construction, premium finish and improved aesthetics compared to the original tips.
- Although primarily aesthetic, being high-quality stainless (T304L per manufacturer) means better durability, finish and potential for improved corrosion resistance.
- Because they are bolt-on, installation is straightforward: you reuse the factory clamp/donut and no welding or major modification is required.
What To Check Before Purchase / Installation:
- Body style match: Ensure you specify Narrow Body vs Wide Body (993 C2S / C4S wide body variants require the wide body version) as the tip size/fitment differs.
- Finish choice: Choose the finish that suits your car’s look and maintenance preferences.
- Length & clearance: On Twin Turbo cars (even though tips will fit), note the tip may protrude more than stock—check under-bumper clearance.
Why These Upgrades Matter:
- Many 993s now have tired or worn factory tips (faded, pitted, mismatched). These tips offer a relatively easy visual enhancement that maintains performance and fit.
- For a restoration or aesthetic-refresh of a 993, swapping the tips is a high-impact but moderate-cost item.
- The range of finishes allows owners to tailor the rear look (e.g., black for stealth, polished for show).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FS.POR.993.SWOTN
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
Shop Securely
12 Month Warranty
Worldwide Delivery
FEATURES:
• Fits all Porsche 718 Boxster/Cayman Base/S Models 2017+ and GTS Models 2017-2020 Worldwide
• Significant Increase in throttle response and reduced turbo lag
• Weight savings of 7 lbs / 3.2 KG’s
• CAD designed X-Pipe made using investment casting for maximum possible flow and spectacular sports car sound
• Helical Limited U.K. silica carbide exhaust valves
• Plug and play exhaust valves work with the factory PSE system (Porsche Sport Exhaust)Optional valve controller kit for non-PSE equipped cars
• Constructed from CNC mandrel-bent T304L stainless steel50 state emissions legal Cat-Back exhaust does not remove the catalytic converters
• All parts are easily installed with no cutting or welding required, bolt-on, and go
• Optimized for maximum performance with no check engine light Choose between real Carbon Fiber, Satin Black, Polished Stainless, Brushed Stainless, or Re-use your OEM tips
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
Fabspeed's 718 Valvetronic Exhaust system for the Porsche Boxster/Cayman gives you full control of how rowdy your exhaust note is. Made with tier one quality Helical exhaust valves and mandrel bent T304 stainless steel, this is an extremely high quality exhaust system worthy of your P-car
SOUND:
With PSE on (valves open) you’ll be treated to a unique and rowdy Porsche flat-four rumble. In sport mode, pops on downshifts will be aggressive and sharp. With PSE off (valves closed), this system is still louder than a stock car but very tame around town without any unwanted drone.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR718VES
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
- Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
- Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
- Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
- Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
- Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
- Porsche Cayman 718 2.0L Manual (300 Bhp)
- Porsche Cayman 718 2.0L PDK (300 Bhp)
- Porsche Cayman S 718 2.5L Manual (350 Bhp)
- Porsche Cayman S 718 2.5L PDK (350 Bhp)
- Porsche Cayman T 718 2.0L Manual (300 Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
.jpg){kind=link}
Fabspeed Valvetronic Exhaust System
Get the best of both worlds with our Valvetronic Exhaust System for all 2009-2011 911 Carreras. Treat yourself to a smooth and civilized exhaust note around town and then open up the valves for an aggressive race-bred sound on the open road. This system works with either the PSE (Porsche Sport Exhaust) button on factory PSE-equipped cars, or order it with our valve controller kit to get complete control over the valves on a Non-PSE Carrera.
FEATURES:
• Fits all Porsche 997.2 Carrera vehicles (2009-2012)
(2012 was a split model year, a 2012 911 Carrera could be either a 997.2 or 991, please verify if your car is a 997.2 or a 991 before purchase)
• Complete Valvetronic exhaust system that replaces both the side and center mufflers
• Saves 11 lbs / 5 KG’s versus the factory exhaust system
• Silicon Carbide Helical Exhaust Valves imported from the U.K.
• World’s finest bulletproof exhaust valves capable of handling extreme heat and operating conditions
• CAD designed X-Pipe made using investment casting for maximum possible flow and spectacular sports car sound50 state emissions legal - OEM Catalytic converters are retained
• The non-PSE option comes with a complete valve controller kit with detailed instructions
• Dramatic improvement in sports car sound and power throughout the RPM range
• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
SOUND:
With the valves closed the exhaust note has a classic smooth flat-six sound that is slightly louder than stock. It’s totally drone-free and in-cabin conversations are as easy as they were when stock. Open up the valves to treat yourself to a raw race-bred sound similar to what you’d hear on a Porsche Cup car. In this mode the X-Pipe and Mufflers are bypassed which creates a very aggressive sound that is much louder than stock.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9972VES
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed