Island Works

Drive by wire inlet conversion kit to GT3 manifolds
Convert the 964/993 induction to 996 GT3 Drive by Wire set-up

Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998

Product Overview:

Inlet conversion kit consists of the throttle body runner and the resonance tube. This is what you need to convert a Porsche 996 GT3 MK1 or MK2 plenum to fit on a Porsche 964 engine. This kit is solid and made from a modified PA12 material making the original Porsche parts feel old and flimsy in comparison. 

Components Include: 

• Throttle body runner made out of a modified PA12 material and an industrial 3d moulding process
• Seal and original Porsche 997 GT3 Bosch 82mm electronic throttle body
• Vacuum tube with original resonance flap internals. Note the internals come from refurbished original 996 parts.
• Vacuum solenoid and reservoir with mounts as per images
• Rubber boots and clamps
• Vacuum connections, check valve and extra hose
• Original Bosch MAP-T-sensor for 1 bar

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411012800

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit for turbo retrofit with inlet manifold runners. 
Convert to Drive by Wire when retro fitting a turbocharger or supercharger

Fits:
Porsche 911 - 1974 - 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

911 used 2-Bolt type
964/993 uses 3-Bolt type

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine, now also for turbo or supercharged cars.

To be used when converting a G-Model 911 or a 964/993 engine to a turbocharged/supercharged engine with a 964 induction based Drive by Wire set-up

Conversion kit to a Porsche 964 based intake system to become a DBW (Drive by wire) intake based 74mm original Bosch throttle body (Sometimes referred to as 76mm) specifically executed all in CNC milled billet aluminum.

This is sold either with the intention to convert a Porsche 964/993 engine or to adapt and convert a 964 intake onto a G-model car when turbocharging (That sounds fun!).

Kit includes:

• Throttle body runner for 74mm throttle body in aluminum 
• Vacuum port on throttle body runner
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Connecting pipe out of aluminum replacing the resonance tube

Intake runners for the Porsche 911 G-model (2-bolt) or 964/993 (3-bolt) engine are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. 

The following parts are to be reused from your original 964 intake:
Rubber boots and clamps
The plenums (inlet manifolds)

Please Note:
Aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93011003404

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit with inlet manifold runners - Billet aluminium version
Convert the G-Model engine to 964/993 induction with Drive by Wire set-up

Fits:
Porsche 911 - 1974 - 1989

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine

Conversion kit for the 911 G-model to become a DBW (Drive by wire) intake based on the 964 induction and using the 74mm original Bosch throttle body (Sometimes referred to as 76mm). This is intended to breathe a bit more life into a classic G-model.

The kit includes

• Throttle body runner for 74mm throttle body
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Resonance tube
• Vacuum solenoid
• Connectors and hose
• Vacuum check valve
• Intake runners for the Porsche 911 G-model engine

Intake runners are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. Please note that these are the 2-bolt designs. 

To create a bit of intimacy between you and your engine we have included a bit of DIY work for you to convert your existing Porsche 964 intake into this version. 

The intake also exists in two versions - This is the premium version where the throttle body runner is milled out of a billet in aluminum. This is the pinnacle of craftmanship giving a very solid feel to the intake at a natural premium. Both options have the same performance and the same durability with the difference being the look and feel of a 5-axis machined piece as the very first thing you lay your eyes on when you open the engine decklid!

For both options the lower resonance tube is made from our usual modified PA12 in black.

The following parts will be reused from the 964 intake:

• Rubber boots and clamps
• Vacuum reservoir
• The aluminium or plastic plenums
• Resonance flap, actuator and shaft

Please Note: 
The aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411090130

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit with inlet manifold runners.
Convert the G-Model engine to 964/993 induction with Drive by Wire set-up

Fits:
Porsche 911 - 1974 - 1989

Please Note: 
The aluminium or plastic intake plenum(inlet manifold) is not included in the kit

Product Overview:

Inject power and precision into your vintage aircooled engine

Conversion kit for the 911 G-model to become a DBW (Drive by wire) intake based on the 964 induction and using the 74mm original Bosch throttle body (Sometimes referred to as 76mm). This is intended to breathe a bit more life into a classic G-model.

The kit includes

• Throttle body runner for 74mm throttle body
• Original Bosch electronic throttle body
• Original Bosch MAP-T-sensor
• Resonance tube
• Vacuum solenoid
• Connectors and hose
• Vacuum check valve
• Intake runners for the Porsche 911 G-model engine

Intake runners are made out of billet aluminium, 3D milled in a 5-axis machine. The port diameter indicated in the options is the diameter of the port in the cylinder head. Please note that these are the 2-bolt designs. 

To create a bit of intimacy between you and your engine we have included a bit of DIY work for you to convert your existing Porsche 964 intake into this version. 

The intake also exists in two versions - this version is what we at Islandworks use with all other intakes, being a modified PA12 material from an industrial manufacturing process. Both options have the same performance and the same durability with the difference being the look and feel of a 5-axis machined piece as the very first thing you lay your eyes on when you open the engine decklid!
For both options the lower resonance tube is made from our usual modified PA12 in black.

The following parts will be reused from the 964 intake:

• Rubber boots and clamps
• Vacuum reservoir
• The aluminium or plastic plenums
• Resonance flap, actuator and shaft

Please Note: 
The aluminium or plastic intake plenum is not included in the kit and neither are any of the items specifically listed as excluded above.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411090130

The product you are viewing cross references to these numbers

Air intake manifold runner 911 to 964, billet aluminium with manifold gaskets - Set of 6
Comes complete with thermal insulating manifold gaskets



Fits:
Porsche 911 - 1974 to 1989

Used to fit 964 induction to 911 G-Model engines

Crafted from high-grade aircraft aluminum, our Porsche G-Model to 964 Billet Intake Runner delivers superior performance enhancements. Available in various cylinder head port diameters ranging from 34mm to 42.5mm, with options for standard injector sizes. 

Compatibility and Customization:
Tailored specifically to fit Porsche 2.7-3.2L engines, this intake runner enables seamless mounting of a Porsche 964/993 type intake. Unlike the 964/993's 3-bolt attachment, our design utilizes a 2-bolt M8 attachment for cylinder head placement.

Versatile Use and Configurations:
Compatible with standard rails or designed for use with the IslandWorks/Nuke system featuring a direct mount fuel regulator. 

Superior Craftsmanship and Finish:
Each runner boasts a natural machined finish, complemented by a base gasket insulator for optimal performance. To ensure that every set of intake runners arrives in style, they are shipped in a personalized color-of-the-day gift box as shown in the images.

Important Note:
This product requires a flat cylinder head seal (included in set) for superior heat insulation, deviating from the conventional seal type.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

930110459

The product you are viewing cross references to these numbers

Drive by wire inlet conversion kit
Convert the 964/993 induction to Drive by Wire set-up

Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998

Product Overview:
Transform your Porsche 964's performance with this sleek and high-tech intake kit designed for Porsche 964/993. This innovation marks a transition from the typical accelerator cable-based throttle to an electronic "drive by wire" throttle body. This advanced change streamlines the intake system by eliminating unnecessary components, resulting in a cleaner engine bay appearance. 

This modification offers a more drivable setup for highly tuned engines while incorporating the precision of a drive by wire (DBW) throttle.

This enhanced drivability is a key feature for a tuned aircooled engine and allows for smooth idle control with a cold as well as a hot engine. It simply makes the engine feel more modern as compared to the old ITB (individual throttle bodies) setups lacking in mid range torque and difficulties with the idle control.

Precision-Engineered Components:

• 82mm Throttle Body with Reinforced Industrial PA12 Manifold
• CNC-Milled Intake Manifold Stacks Crafted from Billet Aluminium
• Included Rubber Boots and Clamps for Easy Installation
• Islandworks Resonance Tube with Valve and Solenoid, Manufactured from the Same PA12 Material
• Integrated Manifold Pressure and Temperature Sensors
• Essential Vacuum Lines for Optimal Performance

Kit Includes
Complete intake with all the parts seen in the image manufactured from modified PA12 using an industrial process. This intake plenum has been optimized to fit on a Porsche 964 or Porsche 993 and includes all vacuum ports for both brake vacuum and to maneuver the resonance flap.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411090100

The product you are viewing cross references to these numbers

Air intake manifold 964/993 to GT3, billet aluminium - Set of 6
Comes complete with thermal insulating manifold gaskets



Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998

Tailored for GT3 Type Intakes:
Specially designed to fit GT3  intake manifolds (with built-in offsets) perfectly accommodating the narrower 964/993 engines.

Product Overview:
Crafted from top-quality aircraft aluminum, our Porsche 964/993 to GT3 Billet Intake Runners offer optimal performance. 
Available in head diameters of 41.5mm, 42.5mm, 44mm or 45.8mm with standard injector sizes. 

Versatile Compatibility and Configurations:
Compatible with standard rails or engineered for use with the IslandWorks/Nuke system, featuring a direct mount fuel regulator. 

Superior Craftsmanship and Finish:
Each runner boasts a natural machined finish and includes a base gasket insulator, ensuring optimal performance.

Important Note:
To ensure effective heat insulation, this product requires a flat cylinder head seal, offering better performance compared to the usual seal type.
Supplied with reinforced high thermal plastic gaskets for thermal insulation

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411071101

The product you are viewing cross references to these numbers

Air intake manifold billet aluminium - Set of 6
Comes complete with manifold gaskets



Fits:
Porsche 964 - 1989 to 1993
Porsche 993 - 1994 to 1998

For use with the standard 964/993 inlet manifolds and 3 bolt manifolds

Product Details:
Replace your aging plastic intake runners on the Porsche 964/993 with meticulously 3D milled billet versions in aircraft aluminum, offering durability and aesthetic enhancement.

Enhanced Specifications:
Available in head diameters of 41.5mm or 42.5mm, paired with standard injector sizes. 

Flexible Compatibility and Configurations:
Compatible with standard rails 

Important Note:
To ensure effective heat insulation, this product requires a flat cylinder head seal, offering better performance compared to the usual seal type.
Supplied with reinforced high thermal plastic gaskets for thermal insulation

Craftsmanship and Finish:
Featuring a natural machined finish, these runners are equipped with a base gasket insulator for 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99311071250

The product you are viewing cross references to these numbers