Magnecor
When it comes to Porsche ignition leads / spark plug leads or wires, especially the high performance and racing variety, we are the leaders in quality, reliability and innovation backed up by technical support and personal service.
Here in the UK, Magnecor Europe Limited have their own production facility and are the sole supplier to our stockists / dealers in the UK & Europe.
Our commitment to quality and attention to detail have seen the brand name obtain much recognition in the industry. This has led to countless accolades and thousands of satisfied customers.
We assemble our own lead sets in-house, therefore we can offer attention to detail for our home markets plus a personalised service with technical backup.
Ignition HT lead set, 7mm Electrosports.
Fits:
Porsche 993 turbo - 1994 to 1996
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead is 7.75 inches long - Please check original item.
HT lead set comes in black
SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil.
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
67186
The product you are viewing cross references to these numbers
- Porsche 993 (911) TURBO 1994-96
Ignition HT lead set, 7mm Electrosports.
Fits:
Porsche 964 turbo 3.6ltr - M64.50 engine code
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead is 5.5 inches long - Please check original item.
HT lead set comes in black
SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil.
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6766
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.6L 1991-93
Ignition HT lead set, 7mm Electrosports.
Fits:
Porsche 964 turbo 3.3ltr - M30.69 engine code
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead is 5.5 inches long - Please check original item.
HT lead set comes in black
SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil.
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
67185
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.3L 1991-93
Ignition HT lead set, 7mm Electrosports.
Fits:
Porsche 911 SC 3.0ltr - 1978 to 1983
Porsche 911 turbo 3.0ltr - 1975 to 1977
Porsche 911 turbo 3.3ltr - 1978 to 1989
For cars with K-Jetronic fuel injection only
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead is 9.5 inches long - Please check original item.
HT lead set comes in black
Conventional DIN fitting on the coil. Only to be used with original type coil
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6704
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 3.2 Carrera - 1984 to 1989
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT leads and 1 x coil lead (king lead)
Coil lead (king lead) is 21.5 inches long - Please check original item.
HT lead set comes in black
SAE / Post / Male fittings on distributor, conventional DIN fitting on the coil. Only to be used with original type coil
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.on HT lead set, 7mm Electrosports.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6714
The product you are viewing cross references to these numbers
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 911 2.0ltr - 1964 to 1968
Ignition HT lead set for an unmodified engine with the coil in its original location.
Set comes with 6 x HT lead and 1 x coil lead (king lead)
Coil lead (king lead) is 20.75 inches long - Please check original item.
Leads are black
Conventional DIN fitting on the coil. Only to be used with original type coil
Magnecor Electrosports 7mm HT leads
Hand-assembled by our highly trained production staff, Magnecor leads are covered by a 10 year guarantee which ensures long lasting reliability and service life.
Magnecor’s Exclusive Metallic Inductance Suppressed Conductor will outlast the life of any engine as Magnecor lead sets are not manufactured just to be a service item. To further improve reliability some Magnecor leads use different connectors to overcome problems associated with the original set you are replacing and this is particularly important if your vehicle is used for competition. Stainless steel snap-lock terminals are used for spark plug ends and phosphor-bronze, brass or stainless steel terminals for distributor/coil ends.
Leads are individually numbered for ease of installation.
Whatever the application – motorsport, performance or family motoring, your engine’s performance will always benefit from a set of Magnecor ignition leads.
- Direct replacement for 7mm original equipment carbon conductor leads with excellent RFI (radio frequency) and EMI (electro magnetic) suppression.
- Overcomes problems associated with limited-life carbon conductors and poorly suppressed aftermarket spiral conductor leads on modern engines.
- Extreme strength, high temperature resistant silicone rubber jacket and high dielectric strength internal silicone insulator bonded by tape to outer jacket for superior terminal retention.
Leads are Special Order. Please allow 2-3 weeks for delivery
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6792
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)