Rennline

Rennline 930 Aluminium mesh grill inserts.



Fits:
Porsche 930/M491 1975-89 with Teatray Tail

If you've ever taken a close look at your 930 or M491 Teatray Tail, you've probably noticed that the factory grill mesh is faded and warped. Unfortunately the replacement grills have been NLA from Porsche for many years, so Rennline has developed an OEM style replacement. Restore your 930 or M491 to its former glory with these lightweight, powder coated aluminum inserts. Powder coated steel mounting brackets and hardware included.

Stainless Steel upgrade for factory hinge pin.
Sold individually. Two (2) required per vehicle



Fits:
Porsche 964
Porsche 993

Billet aluminium steering column bearing.



Fits:
Porsche 911 / 912 / 930 All

If you have never changed your lower steering column bearing that's located in the smuggler's box, there's a good chance that the bearing inside the rubber housing is non-existent. This bearing helps to prevent slop in the steering linkage assembly, but over time, the needle bearing inside gets corroded and ultimately disintegrates. This is often mis-diagnosed as a bad tie rod end because effect on the steering response is very similar. Rennline has created a billet aluminum housing the includes a pressed in needle bearing and unlike the factory unit, this one includes two weather seals to protect the bearing.

Replace it once and don't worry about it again.

Rennline Front oil cooler air scoop.



Fits:
Porsche 911 / 930 1974-89

Do you have fender-mounted oil coolers in the front of your 911 with impact bumpers?
Then an E226 Air Scoop is a must-have. By replacing a side marker light with this air scoop, you open up a passage way for cool fresh air to flow directly into your oil cooler.

Will fit on the left or right side of the car, or both sides if you have 2 oil coolers.

Made From Machined Delrin
Direct Fit With No Modification
Pulls Ambient Air Directly To Oil Cooler

Rennline RWD Conversion spindle kit.
Includes two (2) spindles.



Fits:
Porsche 996 C4 / C4S / Turbo / Turbo S
Porsche 997 C4 / C4S

PRODUCT DESCRIPTION
These RWD conversion spindles will allow you to remove your front axles, differential, and driveshaft allowing you to convert your AWD 996 or 997 to RWD. This conversion will increase the performance of your 911 by removing nearly 100 lbs. of weight while simultaneously reducing the amount of drivetrain loss. This will improve the driving dynamics to handle more akin to the infamous 911 GT3 & GT2. Due to our spindles having integrated ABS reluctor rings like the OEM c/v shafts, no ABS or PASM warning lights will ruin your fun and all electrical systems will retain full functionality. Each spindle is machined from durable carbon steel and coated with yellow zinc to prevent corrosion, ensuring our spindles will last a lifetime. This modification is completely reversible and does not require permanently modifying any parts on your car.

Rennline Folding tow hook - REV2.



Fits
Front - Porsche 911 (992) 2020>>
Front - Porsche 911 (992) GT3 2021>>
Rear - Porsche 911 (992) 2020>>
Rear - Porsche 911 (992) GT3 2021>>

Introducing the latest in tow hook innovation: engineered with an increased side load capacity and adjustable-length rigid mount receiver. This tapered stainless loop design incorporates a new locking function to maintain your preferred loop position. Additional features include machined graphics, rotational timing and camera mount compatibility.

Rennline's stainless steel folding race hooks install in minutes on any Porsche with factory screw type removable tow hooks. Unlike the aluminum units on the market that are usually advertised as "for decorative purposes only", Rennline's stainless steel tow hooks are precision machined and will stand up to the extreme abuse seen in any race environment. These pulls have a 2" opening as required by most organized race events and screw directly into the factory bumper pull location. Each hook comes with a rubber bumper to be applied on the back side to insure your bumper cover will never get scratched from hook contact. Keep the corner workers and track officials happy by installing a set of hooks that are both highly visible and highly functional.

Why is ours the best:

• Ours are the original folding tow hook that has proven it's self 1000's of times over the years.
• Fully machined tapered design with chamfered edges to eliminate cutting tow straps
• Flawless brushed surface finish
• 300 series stainless steel tow loop
Red "TOW" Graphic
• Go Pro Camera mount compatable (Mount sold Separately)


Note: Pictures may not show actual product.

Rennline billet M6 to M7 dash knob adapter

Fits:
Porsche 911 84-85

If you have a Porsche 911 from 1984 or 1985 you will need this shaft adapter when fitting the following

Rennline Dash Knobs
DA80 - Cigarette Lighter
DA82 - Headlight Knob
DA84 - Fog Lamp

Rennline Carbon fibre arm rest.
PAIR



Fits:
Porsche 996

Rennline's carbon fibre arm rests are a great way to give your 996's interior a subtle modern upgrade. Original 996 arm rests are a high wear item and do not hold up well over time.
Made from high quality carbon fibre using the latest technology, our arm rests are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style.
Take your old plastic pieces out and install ours in their place. Installs in minutes reusing the factory hardware.

Rennline Carbon fibre arm rest.



Fits:
Porsche 997
Porsche 987


Rennline's carbon fibre arm rests are a great way to give your 987/997's interior a subtle modern upgrade.
Original 987/997 arm rests are a high wear item and do not hold up well over time. Made from high quality carbon fibre using the latest technology, our arm rests are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style.

Take your old plastic piece out and install ours in their place. Installs in minutes reusing the factory hardware.

Rennline Carbon fibre Door mirror shells.



Fits:
Porsche 996
Porsche 986 Boxster

Rennline's carbon fiber mirror shells are a great way to give your 996 or 986 a subtle yet modern exterior upgrade.

Made from high quality carbon fiber using the latest technology, our mirror shells are designed with the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style.

Take your old plastic pieces out and install ours in their place. Installs in minutes reusing the factory hardware.

Rennline Front bumper lower lip, Carbon Fibre.



Fits:
Porsche 997.1 Turbo
Porsche 997.2 Turbo

Rennline's carbon fiber front lip is a great way to give your 997 Turbo or C4S' exterior an OEM+ look and a modern upgrade.

Made from high quality carbon fiber using the latest technology, our front lips are designed with some of the dimensions of the OEM piece for a factory fit and finish while adding a bit of style. Take off your OEM lip and install ours in its place. Installs in minutes reusing the factory mounting points.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E77

The product you are viewing cross references to these numbers

Rennline Carbon fibre air intake.



Fits:
Porsche 997.1 Turbo


Ever felt your 997.1 Turbo could use a bit more power?

With the Rennline Carbon Fibre Intake your drive will never feel better. This system provides improved flow dynamics that result in real-world power. Made from carbon fibre with black anodized aluminium MAF adapters and stainless steel fasteners, this Carbon Fiber intake performs as good as it looks.

Peak gains of +24 WHP/+4 ft-lbs torque on 100% Stock Vehicle (max gains of 27 WHP/22ft-lbs)

Peak gains of +9 WHP/+15 ft-lbs torque on APR ECU Upgrade with BMC air filter (max gains of 28 WHP/30 ft-lbs)

Rennline ExactFit Magnetic Phone Mount for BMW G80/G20



Detailed Description:

** Steel pad required for use on MagSafe equipped iPhones **

in this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our cars to store them. The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with our ExactFit Magnetic Phone Mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of our mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PM0181

The product you are viewing cross references to these numbers

VW ExactFit Magnetic Phone Mount - MK6 Golf / GTI / Jetta Sportwagen



Fits to the right side of console (LHD cars)

For VW - MK6 Golf / GTI / Jetta Sportwagen
**Does not fit Jetta

Detailed Description:

** Steel pad required for use on MagSafe equipped iPhones **

In this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our cars to store them. The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with our ExactFit Magnetic Phone Mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of our mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available. .

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PM0110

The product you are viewing cross references to these numbers

Carbon fibre centre console trays for Porsche 964



Rennline's carbon fibre centre console trays are the perfect solution to replace your tired or broken factory pieces on your 964. Made from high quality carbon fiber using the latest technology, our center console trays are designed with dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. Take your old plastic pieces out and install ours in their place. Installs in minutes reusing the factory hardware.

Carbon fiber dash end caps for Porsche 964



Rennline's carbon fiber dash end caps are the perfect solution to replace your tired or broken factory pieces on your 964. Made from high quality carbon fiber using the latest technology, our end caps are made using the dimensions of the OEM pieces for a factory fit and finish while adding a bit of style. Take your old covers off and install ours in their place. Installs in minutes using factory hardware.

20 x Press in Studs and 20 Nuts to fit original or OEM Porsche wheels.



When you are building your classic Porsche there are a lot of considerations to be made, and none are more important than what actually holds the wheels on.
These are top quality OEM studs in a variety of lengths to suit your specific build. Studs are a wear item, and on a car that frequently sees track use they should be replaced at least every two years to avoid fatiguing of the steel itself.

Below is a general fitment chart

• 45mm - Stock length for Carrera models
• 66mm - For use with up to 20mm spacers
• 72mm - For use with 930 factory 28mm spacers
• 80mm - For use with 28+mm spacers

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

LS09

The product you are viewing cross references to these numbers

Rennline Blank key 917 style, in Silver.



Compatible with
Porsche 911 / 912 1969-89
Porsche 964 1989-94
Porsche 993 1994-98
Porsche 914 1970-76

It's the little things in life. Inspired by the infamous 917 race cars of the 70's, our Rennline Key Blanks bring iconic style to your keychain. Made from nickel plated brass, to look the part and last a lifetime.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I9

The product you are viewing cross references to these numbers

Rennline Teardrop defrost knob.
Available in red, black and silver.



Compatible with 911/912/930 ('65-'89) or any car with a threaded lever.

Rennline's billet aluminium teardrop defrost knobs are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory knobs become faded, cracked, and/or unsightly after years of exposure to UV light. Rennline billet knobs are machined from 6061 aluminium and are available in red, silver or black anodized finishes for a durable, long lasting appearance. Simply unscrew your old knob, and screw our on.

Rennline Ultimate hood strut - Fully mechanical
Available in black aluminium.



Fits:
Porsche 964
Porsche 993

How many times have you replaced your hood struts? Us too… that's why we developed the ultimate hood strut. The last hood strut that you will ever need. Factory hood struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket hoods, or hoods with bodywork. Operation is simple. Just open your hood all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down. Rennline's fully mechanical hood strut will not fail for the life of the product, and therefore carries a lifetime warranty. It utilizes a billet design with complex machining to ensure a smooth and reliable operation.

For cars with steel hoods, we recommend two struts as the factory hinges flex when only 1 strut is used.
For aluminum or carbon fiber hoods, only one strut is required.

Sold individually.

Rennline's billet T-handle pulls are the perfect inexpensive interior upgrade for any Porsche equipped with this feature. Factory pulls become weak, cracked, and/or unsightly after years of use and exposure to UV light. Rennline billet T-handles are machined from 6061 aluminum and black anodized for a durable, long lasting appearance. Simply unscrew your old pull and screw ours on.



Fits:
Porsche 911/912/930 (1965-1989)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I54

The product you are viewing cross references to these numbers

Rennline Fire Extinguisher Mount - Porsche - EZ Adjust.



Available in 2 colour combinations:
- Black extinguisher mount and black slider
- Silver extinguisher mount and black slider
See the images in gallery for detailed view.

Fits:
Porsche Cayenne 2011>>
Porsche 95B Macan

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike any extinguisher mount on the market, this two-piece design allows you to remove all visible components in seconds to revert to a factory look. While other rail mount systems are fixed and limit your seat travel, our EZ-Adjust Slider allows you to make a wide range of seat adjustments on the fly and installs in minutes.

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike any extinguisher mount on the market, this two-piece design allows you to remove all visible components in seconds to revert to a factory look. While other rail mount systems are fixed and limit your seat travel, our EZ-Adjust Slider allows you to make a wide range of seat adjustments on the fly. Installs in minutes and is designed to fit all types of seats, from lightweight manual race seats to the most complex electric seats from Porsche. Includes Fire Extinguisher Mount and hardware. Fire extinguisher and fire extinguisher quick disconnect not included but available below.

• 2-piece design
• Easy-to-remove components
• EZ-Adjust Slider for seat adjustment
• Installs in minutes
• Fits wide variety of seats

Audi Fit List:
A3/S3/RS3 (8P, 8V)
A4/S4/RS4 (B6, B7, B8, B9)
A5/S5 (B8, B9)
A6/S6/RS6 (C5, C6, C7)
A7/S7/RS7 (C7)
A8/S8 (D3, D4)
Note: Pictures may not show actual product.

Third radiator kit.



For 2013-15 Cayman and Cayman S
Option: Choose the front lower bumper spoiler in primer (to be painted to match your car) or black

Adding a third radiator to your watercooled Porsche is a great way to make sure it will run strong on the street and at the track even in the hotest weather and will ensure greater longetivity in years to come. A factory option for Power Package cars, this kit includes radiators, hoses and all necessary hardware to install this OEM centerpiece. This is a necessary modification for those who will be taking their car to the track in extreme heat, but even standard street cars can benefit during the summer. The location of the coolant thermostat ensures that your engine will take no longer to warm up than before, but you will have significantly increased cooling capacity when you need it.

Includes all necessary parts and hardware. Minor trimming and painting may be required, check notes below.

For the ultimate setup pair this radiator kit with our Rennline Radiator Grill Screens.

Third radiator kit.



Fitment Guide:

Boxster.1 - 06-08 Boxster (requires cutting of center opening) (Manual Transmission Only)
Cayman.1 - 06-08 Cayman or Cayman S (Manual Transmission Only)
BoxsterS - 05-08 Boxster S (Manual Transmission Only)
Boxster.2 - 09-12 Boxster, Boxster S and Spyder (Manual Transmission Only)
Cayman.2 - 09-12 Cayman, Cayman S and Cayman R


Adding a third radiator to your watercooled Porsche is a great way to make sure it will run strong on the street and at the track even in the hotest weather and will ensure greater longetivity in years to come. A factory option for Power Package cars, this kit includes radiators, hoses and all necessary hardware to install this OEM centerpiece. This is a necessary modification for those who will be taking their car to the track in extreme heat, but even standard street cars can benefit during the summer. The location of the coolant thermostat ensures that your engine will take no longer to warm up than before, but you will have significantly increased cooling capacity when you need it.

Includes all necessary parts and hardware. Minor trimming and painting may be required, check notes below.

For the ultimate setup pair this radiator kit with our Rennline Radiator Grill Screens.

Porsche Cayman GT4 Rear Wing Supports



Kit Includes:
• Wing Support Brackets – Left & Right (Billet Aluminium)
• Lower Support Covers – Left & Right (Billet Aluminium)

Make your Cayman GT4 look and perform like a proper Porsche GT car. Salter Aero Rear Wing Supports raises the OEM spoiler an additional 4", dramatically improving the overall look of the GT4. Track tested by professional drivers, these supports provide just enough added downforce in the rear to aid cornering without upsetting stock aerodynamics intended by Porsche. The OEM wing angle and its adjustability is maintained.

Designed using the latest rapid prototyping and 3D CAD techniques and software, the Salter Aero Rear Wing support for the GT4 is a step above all other "extension" type solutions. Inspired by the styling of the Porsche GT3 RS rear wing, we have designed a version that matches the GT4's sleeker, leaner proportions, providing an elegant and functional design that the GT4 should have had from factory.

Both the wing support and lower support covers are made using aircraft quality 6061-T6 billet aluminium and CNC machined using advanced milling machines. They are then bead blasted to a fine, smooth finish, eliminating any milling marks and then finally hard anodized to give a durable scratch resistant matte black finish.

Features:
• Increase of 4" over the OEM wing height.
• Unobstructed view from rear view mirror.
• All components are CNC machined out of 6061-T6 billet aluminium.
• Durable hard anodized flat black finish.
• Easy to install. No drilling, no cutting.
• Designed to fit internal OEM weather seal as per OEM, unlike other brands.
• Completely reversible back to stock.

Rennline Fully Mechanical Hood Strut, Carbon.



Fits
Porsche 986 Boxster
Porsche 987 Boxster and Cayman
Porsche 996
Porsche 997

Sold individually - 2 per car needed

How many times have you replaced your hood struts? Us too… that's why we developed the ultimate hood strut. The last hood strut that you will ever need.
Factory hood struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket hoods, or hoods with bodywork.

Operation is simple. Just open your hood all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down. Rennline's fully mechanical hood strut will not fail for the life of the product, and therefore carries a lifetime warranty. It utilizes a billet design with complex machining to ensure a smooth and reliable operation. It's available with either a carbon fiber body or a black aluminum body to suit your style.

Rennline Fully Mechanical Hood Strut, Black.



Fits
Porsche 986 Boxster
Porsche 987 Boxster and Cayman
Porsche 996
Porsche 997

Sold individually - 2 per car needed

How many times have you replaced your hood struts? Us too… that's why we developed the ultimate hood strut. The last hood strut that you will ever need.
Factory hood struts are hydraulic filled and will eventually fail, without question. They are sensitive to weight and to temperature making them unreliable and less than ideal for aftermarket hoods, or hoods with bodywork.

Operation is simple. Just open your hood all the way up, and it will remain in place. Push it up one more time and it will release the stop and come back down. Rennline's fully mechanical hood strut will not fail for the life of the product, and therefore carries a lifetime warranty. It utilizes a billet design with complex machining to ensure a smooth and reliable operation. It's available with either a carbon fiber body or a black aluminum body to suit your style.

Rennline Leather or Alcantara Steering Wheel
360mm diameter with 60mm dish



Rennline has partnered up with former F1 driver Max Papis and MPI to develop the all new Rennline Retro Steering wheel.
The spokes were carefully designed with inspiration from the Porsche race cars of the 60's and 70's, while the horn button is reminiscent of the early "Hockey Puck" steering wheels, which nicely conceal the steering wheel mounting hardware.
Additionally, this steering wheel has 60mm of dish which has been a popular request by many of our customers.

Rennline Retro steering wheels are hand stitched at MPI in Italy, before coming to Rennline for the final stamp of approval.
Compatible with all 6 x 70mm steering wheel hub adapters, each Rennline Retro Steering Wheel is 360mm wide, has a 60mm dish depth, and is available in your choice of a genuine leather material, or alcantara with its suede-like wrapping, for superior grip.

Porsche 944 Aluminium skid plate



Fits
1985/2 Onwards Oval Dash
Porsche 944
Porsche 944S
Porsche 944S2
Porsche 944 turbo

A lowered ride height is a must for any car used on the track or for performance street driving. The biggest down side to this modification is ground clearance. Speed bumps, pot holes or the occasional "Off Track" excursion can cause some serious damage to the underside of your car.

The Rennline Aluminum Skid Plates have been designed to eliminate those concerns. Rennline's skid plate conceals the underside of the radiator as well as the oil pan and are formed so that no edges will get caught on objects when traveling forward, backwards or sideways.
Hardware is included and installation takes about 5 minutes with no drilling required.

These skid plates work with factory or Rennline front tie downs.

Retractable 3-Point Inertia Reel 911 Front Seat Belt Porsche 964



Fits
Porsche 964 Carrera 2
Porsche 964 Carrera 4

Rennline's 3 point retractable seat belt kit is designed to fit the 1989-1994 Porsche 964 front driver and passenger seats.
Each seat belt comes with a modern end release buckle and bolt down end fittings.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colours, with colour-coordinated stitching.
Mounting hardware not included.
These seat belts are certified to meet FMVSS209.

Buckles do not come with seat belt lamp warning wiring

This product is made to order. Please allow for a 4-6 week lead time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SA-5059-

The product you are viewing cross references to these numbers

Retractable 3-Point Inertia Reel Front Seat Belts Porsche 912 1965-1969



Fits
Porsche 912 1965-1969

Rennline's 3 point retractable seat belt kit is designed to fit the 1965-1968 Porsche 912 front driver and passenger seats.
Each seat belt comes with a chrome lift latch buckle and nickel snap hook end fittings.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colours, with colour-coordinated stitching.
Mounting hardware included.
These seat belts are certified to meet FMVSS209.

This product is made to order. Please allow for a 4-6 week lead time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SA-5057-

The product you are viewing cross references to these numbers

Retractable 3-Point Inertia Reel Front Seat Belts Porsche 911 turbo



Fits
Porsche 911 turbo 1975-1977

Rennline's 3 point retractable seat belt kit is designed to fit the 1975-1977 Porsche 930 front driver and passenger seats.
Each seat belt comes with a modern end release buckle and bolt down end fittings.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colours, with colour-coordinated stitching.
Mounting hardware not included.
These seat belts are certified to meet FMVSS209.

This product is made to order. Please allow for a 4-6 week lead time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SA-50545-

The product you are viewing cross references to these numbers

Retractable 3-Point Inertia Reel Front Seat Belts Porsche 911 1969-1973



Fits
Porsche 911 1969-1973

Rennline's 3 point retractable seat belt kit is designed to fit the 1969-1973 Porsche 911 and 911 Targa front driver and passenger seats.
Each seat belt comes with a modern end release buckle.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colours, with colour-coordinated stitching.
Mounting hardware not included. These seat belts are certified to meet FMVSS209.

This product is made to order. Please allow for a 4-6 week lead time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SA-5054-

The product you are viewing cross references to these numbers

Retractable 3-Point Inertia Reel Front Seat Belts Porsche 911/ 912 1965-1968



Fits
Porsche 911 1965-1968

Rennline's 3 point retractable seat belt kit is designed to fit the 1965-1968 Porsche 911 front driver and passenger seats.
Each seat belt comes with a chrome lift latch buckle and nickel snap hook end fittings.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colours, with colour-coordinated stitching.
Mounting hardware included.
These seat belts are certified to meet FMVSS209.

This product is made to order. Please allow for a 4-6 week lead time.

Retractable 3-point inertia reel front seat belts.



Fits
Porsche 968

Rennline's 3 point retractable seat belt kit is designed to fit the 1992-1995 Porsche 968 front driver and passenger seats.
Each seat belt comes with a modern end release buckle and bolt down end fittings.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colours, with colour-coordinated stitching.
Mounting hardware not included.
These seat belts are certified to meet FMVSS209.

This product is made to order. Please allow for a 4-6 week lead time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SA-50532-

The product you are viewing cross references to these numbers

Retractable 3-Point Inertia Reel Front Seat Belts Porsche 944 1982-1987



Fits
Porsche 944

Rennline's 3 point retractable seat belt kit is designed to fit the 1982-1987 Porsche 944 front driver and passenger seats.
Each seat belt comes with a modern end release buckle and bolt down end fittings.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colours, with colour-coordinated stitching.
Mounting hardware not included.
These seat belts are certified to meet FMVSS209.

This product is made to order. Please allow for a 4-6 week lead time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SA-50531-

The product you are viewing cross references to these numbers

Retractable 3-point inertia reel front seat belts.



Fits
Porsche 356 1962-65

Rennline's 3 point retractable seat belt kit is designed to fit the 1962-1965 Porsche 356C front driver and passenger seats.
Each seat belt comes with a chrome lift latch buckle and nickel snap hook end fittings.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colors, with color-coordinated stitching. Mounting hardware included.
These seat belts are certified to meet FMVSS209.

This product is made to order. Please allow for a 4-6 week lead time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SA-5051-

The product you are viewing cross references to these numbers

Retractable 3-Point Inertia Reel 911 Rear Seat Belt



Fits
Porsche 964 Carrera 2
Porsche 964 Carrera 4

Rennline's 3 point retractable seat belt kit is designed to fit the 1989-1994 Porsche 964 rear driver seats. Each seat belt comes with a modern end release buckle.
The 47mm polyester webbing is sourced from Germany and is available in a variety of different colours, with colour-coordinated stitching.
Mounting hardware not included.
These seat belts are certified to meet FMVSS209.

This product is made to order. Please allow for a 4-6 week lead time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SA-50528-

The product you are viewing cross references to these numbers