Wossner
For more than 40 years, we have successfully designed and produce high-performance pistons and connecting rods.
In order to offer our Porsche customers the best of Wössner Power, our products are produced by using state-of-the-art technology and are subject to continuous quality control.
Wössner customers benefit from many years of know-how and the flexibility of a family business.
Performance, quality and longevity – this is what Wössner stands for with high-quality products.
Fits:
Porsche 986 Boxster 2.5ltr - 1997 to 1999
Please note, pistons not suitable for Alusil coated bores
Suitable to use with Nikasil liners.
Technical information is sourced from Wossner's latest catalogue:
Part Number: K9568DA
Oversize: 0.0mm (Standard)
Engine Type: M96.20
Piston Size: 85.42mm
OE Bore Size: 85.5mm
Stroke: 72mm
Wössner Comp Ratio: 11.0:1
Compression Height: 35.3mm
Ring Part Number: 855XPY
Number of Cylinders: 6
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
K9568DA
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
Fits:
Porsche 986 Boxster 2.7ltr - 2003 to 2004
Porsche 987 Boxster 2.7ltr - 2005 to 2008
Porsche 987 Cayman 2.7ltr - 2006 to 2008
Please note, pistons not suitable for Alusil coated bores
Suitable to use with Nikasil liners.
Technical information is sourced from Wossner's latest catalogue:
Part Number: K9569DA
Oversize: 0.0mm (Standard)
Engine Type: M96.20 / M96.25 / M97.20
Piston Size: 85.42mm
OE Bore Size: 85.5mm
Stroke: 78mm
Wössner Comp Ratio: 11.0:1
Compression Height: 32.3mm
Ring Part Number: 855XPY
Number of Cylinders: 6
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
K9569DA
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Cayman 2.7L 987C 2006-08
Suitable to use with Nikasil liners.
Engine Type:
Porsche 911 2.4 / 2.7 / 3.0 Carrera / 3.0L Turbo
6-cylinder engines
Con Rod Length C/C: 127.75mm
Small end Diameter: 22.00mm
Small End Width: 23.77mm
Big End Diameter: 56.00mm
Big End Width: 25.90mm
All Wossner Forged Con Rods are made in Germany. Constructed from 4340 Forged steel, featuring a 'H' beam design, they can withstand extreme load and high RPM levels which makes them a worthwile addition during your engine rebuild. They are supplied as matched full engine sets within +/- 1.5grams and include ARP Bolts.
Price shown is for complete engine set.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1975-1977 3.0L Turbo (930)
Fits:
Porsche 911 SC 3.0Ltr
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K1730DA
Engine Type: 930.10
OE Bore Size: 95.00mm
Bore Sizes Available:
- 95.00mm - 2994.06cc, Compression Ratio: 11.5:1
Bore Size 95.00mm
Piston Size: – K1730DA
Over Size: 0mm
Displacement CC: 2994cc
Dome / Bowl Volume: +51.60cc
Wössner Comp Ratio: 11.5:1
Ring Part Number: 950ZST-3
Standard
Stroke: 70.40mm
Dome/Bowl Volume: +48.2cc
OE Comp. Ratio: 9.8:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 SC 3.0
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K1720DA
Engine Type: 930.10
OE Bore Size: 95.00mm
Bore Sizes Available:
- 95.00mm - 2994.06cc, Compression Ratio: 10.5:1
Bore Size 95.00mm
Piston Size: – K1720DA
Over Size: 0mm
Displacement CC: 2994cc
Dome / Bowl Volume: +42.2cc
Wössner Comp Ratio: 10.5:1
Ring Part Number: 950XSY-3
Standard
Stroke: 70.40mm
Dome/Bowl Volume: +48.2cc
OE Comp. Ratio: 9.8:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 997.1 (911) 3.6 C2 & C4
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9468
Engine Type: M96.05
OE Bore Size: 96.00mm
Bore Sizes Available:
- 96.00mm - 3824.21, Compression Ratio: 11.3:1
- 96.50mm - 3862.93, Compression Ratio: 11.4:1
Bore Size 96.00mm
Piston Size:
Over Size: 0mm
Displacement CC:
Dome / Bowl Volume:
Wössner Comp Ratio: 11.3:1
Ring Part Number: 960XSY-3
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 96.50mm
Piston Size:
Over Size: 0.5mm
Displacement CC:
Dome / Bowl Volume:
Wössner Comp Ratio: 11.4:1
Ring Part Number: 965XSY-3
Please note, pistons not suitable for Alusil or Lokasil coated bores
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
Fits:
Porsche 944S 2.5Ltr
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9531
Engine Type: - M44.40
OE Bore Size: 100.00mm
Bore Sizes Available:
- 100.00mm - 2478.71cc, Compression Ratio: 11.4:1
- 100.50mm - 2528cc, Compression Ratio: 11.4:1
- 101.00mm - 2503cc, Compression Ratio: 11.4:1
Bore Size 100.00mm
Piston Size: 99.92mm
Over Size: 0mm
Displacement CC: 2478cc
Dome / Bowl Volume: -10cc
Wossner Comp Ratio: 11.4:1
Ring Part Number: 1000XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 100.50mm
Piston Size: 100.42mm
Over Size: 0.5mm
Displacement CC: 2528cc
Dome / Bowl Volume: -10cc
Wossner Comp Ratio: 11.4:1
Ring Part Number: 1005XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 101.00mm
Piston Size: 100.92mm
Over Size: 1mm
Displacement CC: 2503cc
Dome / Bowl Volume: -10cc
Wossner Comp Ratio: 11.4:1
Ring Part Number: 1010XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 78.9mm
Dome/Bowl Volume: -
OE Comp. Ratio: 10.2:1
Comp. Height: 40.6mm
Valves Per Cylinder: 2
Cylinders: 4
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 944S 2.5L 16V 1987-88
Fits:
Porsche 944 turbo 2.5Ltr
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9477
Engine Type: - M44.52
OE Bore Size: 100.00mm
Bore Sizes Available:
- 100.00mm - 2478.71cc, Compression Ratio: 8:1
- 100.50mm - 2503.56cc, Compression Ratio: 8.07:1
- 101.00mm -2528.54cc, Compression Ratio: 8.14:1
Bore Size 100.00mm
Piston Size: 99.92mm – K9477DA
Over Size: 0mm
Displacement CC: 2478cc
Dome / Bowl Volume: 26.6cc
Wössner Comp Ratio: 8:1
Ring Part Number: 1000XTY
Bore Size 100.50mm
Piston Size: 100.42mm – K9477D050
Over Size: 0.5mm
Displacement CC: 2503cc
Dome / Bowl Volume: 26.6cc
Wössner Comp Ratio: 8.07:1
Ring Part Number: 1005XPY
Bore Size 101.00mm
Piston Size: 100.92mm – K9477D100
Over Size: 1mm
Displacement CC: 2528cc
Dome / Bowl Volume: 26.6cc
Wössner Comp Ratio: 8.14:1
Ring Part Number: 1010XTY
Standard
Stroke: 78.9mm
Dome/Bowl Volume: -
OE Comp. Ratio: 8.1:1
Comp. Height: 40.8mm
Valves Per Cylinder: 2
Cylinders: 4
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
Fits:
Porsche 987 Boxster S 3.2L 24v
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K1808
Engine Type: M96.26
OE Bore Size: 93.00mm
Bore Sizes Available:
- 93.00mm - 3179cc, Compression Ratio: 11.1:1
Bore Size 93.00mm
Piston Size: 92.93mm
Over Size: 0mm
Displacement CC: 3179cc
Dome / Bowl Volume: -12.65cc
Wossner Comp Ratio: 11.1:1
Ring Part Number: 930XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 78mm
Dome/Bowl Volume:
OE Comp. Ratio : 11.1:1
Comp. Height : 32.3mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
Engine Type:
944 & 944 Turbo
968, Cup, S2, S
Length C/C: 150.00mm
Small End Diameter: 24.00mm
Small End Width: 26.30mm
Big End Diameter: 55.00mm
Big End Width: 28.80mm
All Wossner Forged Con Rods are made in Germany. Constructed from 4340 Forged steel, featuring a 'H' beam design, they can withstand extreme load and high RPM levels which makes them a worthwile addition during your engine rebuild. They are supplied as matched full engine sets within +/- 1.5grams and include ARP Bolts.
Price shown is for complete engine set.
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche RS 2.7 1973
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9413
Engine Type: -
OE Bore Size: 90.00mm
Bore Sizes Available:
- 90.00mm - 2687.19cc, Compression Ratio: 11.6:1
- 92.00mm - 2807cc, Compression Ratio: 11.6:1
Bore Size 90.00mm
Piston Size: 89.95mm – K9413DA
Over Size: 0mm
Displacement CC: 2686cc
Dome / Bowl Volume: 31.5cc
Wössner Comp Ratio: 11.6:1
Ring Part Number: 900XSY
Bore Size 92.00mm
Piston Size: 91.95mm – K9413D200
Over Size: 2mm
Displacement CC: 2807cc
Dome / Bowl Volume: 31.5cc
Wössner Comp Ratio: 11.6:1
Ring Part Number: 920XSY
Standard
Stroke: 70.4mm
Dome/Bowl Volume: +26.4cc
Wössner Comp. Ratio: 11.6:1
OE Comp. Ratio: 8.5:1
Comp. Height: 32.5mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 987 Cayman 3.4ltr - 2006 to 2008
Please note, pistons not suitable for Alusil or Lokasil coated bores.
This kit is fine for Nikasil liners
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9741
Engine Type: M97.21
OE Bore Size: 96.00mm
Bore Sizes Available:
- 96.00mm - 3387.49cc, Compression Ratio: 11.3:1
- 96.50mm - 3422.87cc, Compression Ratio: 11.4:1
- 97.00mm - 3458.43cc, Compression Ratio: 11.3:1
Bore Size 96.00mm
Piston Size: 95.93mm
Over Size: 0mm
Displacement CC: 3387cc
Dome / Bowl Volume: -10cc
Wössner Comp Ratio: 11.1:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 96.50mm
Piston Size: 96.43mm
Over Size: 0.5mm
Displacement CC: 3422cc
Dome / Bowl Volume: -10cc
Wössner Comp Ratio: 11.2:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 97.00mm
Piston Size: 96.93mm
Over Size: 1mm
Displacement CC: 3458cc
Dome / Bowl Volume: -10ccmm
Wössner Comp Ratio:
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 78mm
OE Comp. Ratio: 11:1
Comp. Height: 32.3mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.Price shown is for complete engine set.
- Porsche Cayman S 3.4L 987C 2005-08
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wossner's latest catalogue:
Part Number: K9268
Engine Type: -
OE Bore Size: 100.00mm
Bore Sizes Available:
- 102.00mm - 3745.71cc
Stroke: 76.4mm
Dome/Bowl Volume: +0.82cc
Wössner Comp. Ratio: 12.7:1
OE Comp. Ratio: 12.0:1
Comp. Height : 30.10mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 997 GT3 2007>>
Fits:
Porsche 997 (911) Carrera S & 4S 3.8L 24v
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9474
Engine Type: M97.01
OE Bore Size: 99.00mm
Bore Sizes Available:
- 99.00mm - 3824.21, Compression Ratio: 11.8:1
- 99.50mm - 3862.93, Compression Ratio: 11.9:1
- 100.00mm - 3901.85, Compression Ratio: 12.0:1
Bore Size 99.00mm
Piston Size: 98.93mm
Over Size: 0mm
Displacement CC: 3824cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 11.8:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 99.50mm
Piston Size: 99.43mm
Over Size: 0.5mm
Displacement CC: 3862cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 11.9:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 100.00mm
Piston Size: 99.93mm
Over Size: 1mm
Displacement CC: 3901cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 12.0:1
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 82.8mm
Dome/Bowl Volume: -13.8cc
OE Comp. Ratio: 11.8:1
Comp. Height : 33mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
K9474
The product you are viewing cross references to these numbers
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
Fits:
Porsche 996 TT / GT2 to 3.8L 24v Turbo 2001-05 (9.4:1 C/R)
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wossner's latest catalogue:
Part Number: K9260
Engine Type: -
OE Bore Size: 100.00mm
Bore Sizes Available:
- 102.00mm - 3745.71cc, Compression Ratio: 9.4:1
Stroke: 76.4mm
Dome/Bowl Volume: -20cc
Wössner Comp. Ratio: 9.4:1
OE Comp. Ratio: 9.4:1
Comp. Height: 33.10mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
Fits:
Porsche 996 911 Carrera / 911 Carrera 4 3.4L 24v
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wossner's latest catalogue:
Part Number: K9472
Engine Type: M96.01/04
OE Bore Size: 96.00mm
Bore Sizes Available:
- 96.00mm - 3387.49cc, Compression Ratio: 11.3:1
- 96.50mm - 3422.87cc, Compression Ratio: 11.4:1
- 97.00mm - 3458.43cc, Compression Ratio: 11.3:1
Bore Size 96.00mm
Piston Size: 95.93mm
Over Size: 0mm
Displacement CC: 3387cc
Dome / Bowl Volume: -15cc
Wössner Comp Ratio: 11.3:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 96.50mm
Piston Size: 96.43mm
Over Size: 0.5mm
Displacement CC: 3422cc
Dome / Bowl Volume: -15cc
Wössner Comp Ratio: 11.4:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 97.00mm
Piston Size: 96.93mm
Over Size: 1mm
Displacement CC: 3458cc
Dome / Bowl Volume: -15cc
Wössner Comp Ratio: 11.3:1
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 78mm
Dome/Bowl Volume: -15cc
OE Comp. Ratio: 11.3:1
Comp. Height: 32.3mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
Fits:
Porsche 996 911 Carrera / 911 Carrera 4 & 4s 3.6 24v
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9473
Engine Type: M96.03
OE Bore Size: 96.00mm
Bore Sizes Available:
- 96.00mm - 3595.95cc, Compression Ratio: 11.3:1
- 96.50mm - 3633.50cc, Compression Ratio: 11.4:1
- 97.00mm - 3671.26cc, Compression Ratio: 11.3:1
Bore Size 96.00mm
Piston Size: 95.93mm
Over Size: 0mm
Displacement CC: 3595cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.3:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 96.50mm
Piston Size: 96.43mm
Over Size: 0.5mm
Displacement CC: 3633cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.4:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 97.00mm
Piston Size: 96.93mm
Over Size: 1mm
Displacement CC: 3671cc
Dome / Bowl Volume: -11cc
Wössner Comp Ratio: 11.3:1
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 82.8mm
Dome/Bowl Volume: -11cc
OE Comp. Ratio: 11.3:1
Comp. Height: 33mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
K9473
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Fits:
Porsche 993 3.6Ltr - 1994-1998
Not suitable for Alusil or Lokasil Treated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9016
Engine Type: -
OE Bore Size: 100.00mm
Bore Sizes Available:
- 100.00mm - 3600.26cc, Compression Ratio: 11.8:1
- 102.00mm - 3745.71cc, Compression Ratio: 11.8:1
Bore Size 100.00mm
Piston Size: 99.94mm – K9106DA
Over Size: 0mm
Displacement CC: 3600cc
Dome / Bowl Volume: +40.16cc
Wössner Comp Ratio: 11.8:1
Ring Part Number: 1000XSY
Not suitable for Alusil or Lokasil Treated bores
Bore Size 102.00mm
Piston Size: 101.94mm – K9106D200
Over Size: 2mm
Displacement CC: 3745cc
Dome / Bowl Volume: +40.16cc
Wössner Comp Ratio: 11.8:1
Ring Part Number: 1002XSY
Not suitable for Alusil or Lokasil Treated bores
Strandard
Stroke: 76.4mm
Dome/Bowl Volume: +40.16cc
OE Comp. Ratio: 11.3:1
Comp. Height: 31.7mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Fits:
Porsche 965 Turbo 1990-94
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wossner's latest catalogue:
Bore Sizes Available:
- 102.00mm - 3745.71cc, Compression Ratio: 8.2:1
Bore Size 102mm
Piston Size: 101.94mm – K9196D200
Over Size: 2mm
Displacement CC: 3745cc
Dome / Bowl Volume: +6.65cc
Wossner Comp Ratio: 8.2:1
Ring Part Number: 1002XSK
Standard
Stroke: 76.4mm
Dome/Bowl Volume: +6.65cc
Wössner Comp. Ratio: 8.2:1
OE Comp. Ratio: 7.5:1
Comp. Height: 31.7mm
Valves Per Cylinder: 2
Cylinders: 3
Part Number: K9196
Engine Type: -
OE Bore Size: 100.00mm
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 964 (911) TURBO 3.6L 1991-93
Fits:
Porsche 964 3.6L - 1989-94
Not suitable for Alusil or Lokasil Treated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9017
Engine Type: -
OE Bore Size: 100.00mm
Bore Sizes Available:
- 100.00mm - 3600.26cc, Compression Ratio: 11.8:1
- 102.00mm - 3745.71cc, Compression Ratio: 11.8:1
Bore Size 100.00mm
Piston Size: 99.94mm – K9107DA
Over Size: 0mm
Displacement CC: 3600cc
Dome / Bowl Volume: +40.16cc
Wössner Comp Ratio: 11.8:1
Ring Part Number: 1000XSY
Not suitable for Alusil or Lokasil Treated bores
Bore Size 102.00mm
Piston Size: 101.94mm – K9106D200
Over Size: 2mm
Displacement CC: 3745cc
Dome / Bowl Volume: +40.16cc
Wössner Comp Ratio: 11.8:1
Ring Part Number: 1002XSK
Not suitable for Alusil or Lokasil Treated bores
Standard
Stroke: 76.4mm
Dome/Bowl Volume: +40.16cc
OE Comp. Ratio: 11.3:1
Comp. Height: 31.7mm
Valves Per Cylinder: 2
Cylinders: 3L / 3R
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
K9017
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Fits:
Porsche 944 S2 (1989-1991)
Porsche 968 (1992-1995)
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9493
Engine Type - 3.0 / 944 S2 - M44.41 - M44.43 /
968 - M44.41 - M44.43.
Bore Sizes Available:
- 104.00mm, Compression Ratio: 10.9:1
- 104.50mm, Compression Ratio: 10.9:1
- 105.00mm, Compression Ratio: 10.9:1
Bore Size 104.00mm
Piston Size: 103.92mm – K9493DA
Over Size: 0mm
Displacement CC: 2989cc
Dome / Bowl Volume: 25.5cc
Wössner Comp Ratio: 10.9:1
Ring Part Number: 1040XSU
Bore Size 104.50mm
Piston Size: 104.42mm – K9493D050
Over Size: 0.5mm
Displacement CC: 3018cc
Dome / Bowl Volume: 25.5cc
Wössner Comp Ratio: 10.9:1
Ring Part Number: 1045XSU
Bore Size 105.00mm
Piston Size: 104.92mm – K9493D100
Over Size: 1mm
Displacement CC: 3047cc
Dome / Bowl Volume: 25.5cc
Wössner Comp Ratio: 10.9:1
Ring Part Number: 1050XSU
Standard
Engine CC - 2990 / 3019 / 3048cc.
Stroke - 88.00mm
OE Compression Ratio - 10.9:1.
Compression Height - 36.00mm.
Number of cylinders : 4
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 944 2.5 8v 1988-89
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9476
Engine Type: - M44.09, M44.10,
OE Bore Size: 100.00mm
Bore Sizes Available:
- 100.00mm - 2478.71cc, Compression Ratio: 10.6:1
- 100.50mm - 2503.56cc, Compression Ratio: 10.7:1
- 101.00mm -2528.54cc, Compression Ratio: 10.79:1
Bore Size 100.00mm
Piston Size: 99.92mm
Over Size: 0mm
Displacement CC: 2478cc
Dome / Bowl Volume: -0.5cc
Wössner Comp Ratio: 10.6:1
Ring Part Number: 1000XPY
Bore Size 100.50mm
Piston Size: 100.42mm
Over Size: 0.5mm
Displacement CC: 2503cc
Dome / Bowl Volume: -0.5cc
Wössner Comp Ratio: 10.7:1
Ring Part Number: 1005XPY
Bore Size 101.00mm
Piston Size: 100.92mm
Over Size: 1mm
Displacement CC: 2528cc
Dome / Bowl Volume: -0.5cc
Wössner Comp Ratio: 10.79:1
Ring Part Number: 1010XPY
Standard
Stroke: 78.9mm
Dome/Bowl Volume: -
OE Comp. Ratio: 10.2:1
Comp. Height: 40.8mm
Valves Per Cylinder: 2
Cylinders: 4
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
Fits
Porsche 930 3.3 12v Turbo 1977-89
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9290
Engine Type: M30.66 / M30.B6
OE Bore Size: 97.00mm
Bore Sizes Available:
- 97.00mm - 3298.81cc, Compression Ratio: 7:1
- 98.00mm - 3366.00cc, Compression Ratio: 7:1
Bore Size 97.00mm
Piston Size: 96.95mm – K9290DA
Over Size: 0mm
Displacement CC: 3298cc
Dome / Bowl Volume: 4.2cc
Wössner Comp Ratio: 7:1
Ring Part Number: 970XTY
Bore Size 98.00mm
Piston Size: 97.95mm – K9290D100
Over Size: 1mm
Displacement CC: 3366cc
Dome / Bowl Volume: 4.2cc
Wössner Comp Ratio: 7:1
Ring Part Number: 980XTY
Standard
Stroke: 74.40mm
Dome/Bowl Volume: 4.2cc
OE Comp. Ratio: 7.0:1
Comp. Height: 32.8mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 930 3.0 12v Turbo 1974-77
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wossner's latest catalogue:
Part Number: K9289
Engine Type: M30.66 / M30.B6
OE Bore Size: 95.00mm
Bore Sizes Available:
- 95.00mm - 2994.06cc
Stroke: 70.40mm
Dome/Bowl Volume: 4.2cc
Wössner Comp. Ratio: 6.5:1
OE Comp. Ratio: 6.5:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1975-1977 3.0L Turbo (930)
Fits:
Porsche 911 T 2.2 12v 1969-71 (125PS)
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9135
Engine Type: 911.03
OE Bore Size: 84.00mm
Bore Sizes Available:
- 84.00mm - 2194.54cc, Compression Ratio: 8.5:1
- 84.50mm - 2220.74cc, Compression Ratio: 8.59:1
- 85.00mm - 2247.10cc, Compression Ratio: 8.68:1
Bore Size 84.00mm
Piston Size: 83.94mm – K9135DA
Over Size: 0mm
Displacement CC: 2194cc
Dome / Bowl Volume: 19.1cc
Wössner Comp Ratio: 8.5:1
Ring Part Number: 840XTY
Bore Size 84.50mm
Piston Size: 84.44mm – K9135D050
Over Size: 0.5mm
Displacement CC: 2220cc
Dome / Bowl Volume: 19.1cc
Wössner Comp Ratio: 8.59:1
Ring Part Number: 845XTY
Bore Size 85.00mm
Piston Size: 84.94mm – K9135D100
Over Size: 1mm
Displacement CC: 2246cc
Dome / Bowl Volume: 19.1cc
Wössner Comp Ratio: 8.68:1
Ring Part Number: 850XTY
Standard
Stroke: 66mm
Dome/Bowl Volume: +19.1cc
OE Comp. Ratio: 8.6:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 SC 3.0 12v 1980-83 (204PS)
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Not for use with ALUSIL cylinders
Part Number: K9254
Engine Type: 930.10
OE Bore Size: 95.00mm
Bore Sizes Available:
- 95.00mm - 2994.06cc, Compression Ratio: 10.5:1
- 98.00mm - 3186.15cc, Compression Ratio: 11:1
Bore Size 95.00mm
Piston Size: 94.93mm – K9254DA
Over Size: 0mm
Displacement CC: 2994cc
Dome / Bowl Volume: +42.2cc
Wössner Comp Ratio: 10.5:1
Ring Part Number: 950XSY
Bore Size 98mm
Piston Size: 97.93mm – K9254D300
Over Size: 3mm
Displacement CC: 3186cc
Dome / Bowl Volume: +42.2cc
Wössner Comp Ratio: 11:1
Ring Part Number: 980XSY
Standard
Stroke: 70.4mm
Dome/Bowl Volume: +42.2cc
OE Comp. Ratio: 9.8:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 SC 3.0 12v 1978-82
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9456
Engine Type: 930.10
OE Bore Size: 95.00mm
Bore Sizes Available:
- 95.00mm - 2994.06cc, Compression Ratio: 11.5:1
Bore Size 95.00mm
Piston Size: 94.95mm – K9456DA
Over Size: 0mm
Displacement CC: 2993cc
Dome / Bowl Volume: 52.4cc
Wössner Comp Ratio: 11.5:1
Ring Part Number: 950XSY
Standard
Stroke: 70.40mm
Dome/Bowl Volume: +48.2cc
OE Comp. Ratio: 9.8:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1978-1983 3.0L / SC
Fits:
Porsche 911 S/E/T 2.4L
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9482
Engine Type: -
OE Bore Size: 84.00mm
Bore Sizes Available:
- 84.00mm - 2194.54cc, Compression Ratio: 10:1
- 84.50mm - 2220.74cc, Compression Ratio: 10.11:1
- 85.00mm - 2247.10cc, Compression Ratio: 10.22:1
Bore Size 84.00mm
Piston Size: 83.94mm – K9482DA
Over Size: 0mm
Displacement CC: 2340cc
Dome / Bowl Volume: 24.6cc
Wössner Comp Ratio: 10:1
Ring Part Number: 840XSY
Bore Size 84.50mm
Piston Size: 84.44mm – K9482D050
Over Size: 0.5mm
Displacement CC: 2368cc
Dome / Bowl Volume: 24.6cc
Wössner Comp Ratio: 10.11:1
Ring Part Number: 845XSY
Bore Size 85.00mm
Piston Size: 84.94mm – K9482D100
Over Size: 1mm
Displacement CC: 2396cc
Dome / Bowl Volume: 24.6cc
Wössner Comp Ratio: 10.22:1
Ring Part Number: 850XSY
Standard
Stroke: 70.4mm
Dome/Bowl Volume: +24.6cc
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 S 2.2 12v 1969-70 (180PS)
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9103
Engine Type: 911.02
OE Bore Size: 84.00mm
Bore Sizes Available:
- 84.00mm - 2194.54cc, Compression Ratio: 10.5:1
- 84.50mm - 2220.74cc, Compression Ratio: 10.61:1
- 85.00mm - 2247.10cc, Compression Ratio: 10.73:1
Bore Size 84.00mm
Piston Size: 83.94mm – 83.94mm
Over Size: 0mm
Displacement CC: 2340cc
Dome / Bowl Volume: 29.4cc
Wössner Comp Ratio: 10.5:1
Ring Part Number: 840XSY
Bore Size 84.50mm
Piston Size: 84.44mm – K9103D050
Over Size: 0.5mm
Displacement CC: 2368cc
Dome / Bowl Volume: 29.4cc
Wössner Comp Ratio: 10.61:1
Ring Part Number: 845XSY
Bore Size 85.00mm
Piston Size: 84.94mm – K9103D100
Over Size: 1mm
Displacement CC: 2396cc
Dome / Bowl Volume: 29.4cc
Wössner Comp Ratio: 10.73:1
Ring Part Number: 850XSY
Standard
Stroke: 66mm
Dome/Bowl Volume: +29.4cc
OE Comp. Ratio: 9.8:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 S 1967-1969 (160PS)
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9412
Engine Type: - 901.02, 901.10
OE Bore Size: 80.00mm
Bore Sizes Available:
- 80.00mm - 1990.51cc, Compression Ratio: 10.5:1
- 80.50mm - 2015.47cc, Compression Ratio: 10.62:1
- 81.00mm - 2040.59cc, Compression Ratio: 10.74:1
Bore Size 80.00mm
Piston Size: 79.93mm – K9412DA
Over Size: 0mm
Displacement CC: 1990cc
Dome / Bowl Volume: 34.5cc
Wössner Comp Ratio: 10.5:1
Ring Part Number: 800XDS
Bore Size 80.50mm
Piston Size: 80.43mm – K9412D050
Over Size: 0.5mm
Displacement CC: 2015cc
Dome / Bowl Volume: 34.5cc
Wössner Comp Ratio: 10.62:1
Ring Part Number: 805XDS
Bore Size 81.00mm
Piston Size: 80.93mm – K9412D100
Over Size: 1mm
Displacement CC: 2040cc
Dome / Bowl Volume: 34.5cc
Wössner Comp Ratio: 10.74:1
Ring Part Number: 810XDS
Standard
Stroke: 66mm
Dome/Bowl Volume: +34.5cc
OE Comp. Ratio: 9.8:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits:
Porsche 911 E / 911 L 2.0 12v 1965-68 (130-140PS)
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9102
Engine Type: 2000
OE Bore Size: 80.00mm
Bore Sizes Available:
- 80.00mm - 1990.51cc, Compression Ratio: 9:1
- 80.50mm - 2015.47cc, Compression Ratio: 9.1:1
- 81.00mm - 2040.59cc, Compression Ratio: 9.2:1
- 81.50mm - 2065.00cc, Compression Ratio: 9.2:1
Bore Size 80.00mm
Piston Size: 79.94mm – K9102DA
Over Size: 0mm
Displacement CC: 1990cc
Dome / Bowl Volume:
Wössner Comp Ratio: 9:1
Ring Part Number: 800XDS
Bore Size 80.50mm
Piston Size: 80.44mm – K9102D050
Over Size: 0.5mm
Displacement CC: 2015cc
Dome / Bowl Volume:
Wössner Comp Ratio: 9.1:1
Ring Part Number: 805XDS
Bore Size 81.00mm
Piston Size: 80.94mm – K9102D100
Over Size: 1mm
Displacement CC: 2040cc
Dome / Bowl Volume:
Wössner Comp Ratio: 9.2:1
Ring Part Number: 810XSY
Bore Size 81.50mm
Piston Size: 81.44mm – K9102D150
Over Size: 1.5mm
Displacement CC: 2065cc
Dome / Bowl Volume:
Wössner Comp Ratio: 9.2:1
Ring Part Number: 815XSY
Standard
Stroke: 66mm
Dome/Bowl Volume: -
OE Comp. Ratio: 9.1:1
Comp. Height: 34mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits:
Porsche 911 3.2 12v 1983-90
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9255
Engine Type: 930.20 / 930.21 / 930.26
OE Bore Size: 95.00mm
Bore Sizes Available:
- 95.00mm - 3164.18cc, Compression Ratio: 10.5:1
- 98.00mm - 3367.18cc, Compression Ratio: 11.1:1
Bore Size 95.00mm
Piston Size: 94.95mm – K9255DA
Over Size: 0mm
Displacement CC: 3163cc
Dome / Bowl Volume: 36.5cc
Wössner Comp Ratio: 10.5:1
Ring Part Number: 950XSY
Bore Size 98.00mm
Piston Size: 97.95mm – K9255D300
Over Size: 3mm
Displacement CC: 3mm
Dome / Bowl Volume: 36.5cc
Wössner Comp Ratio: 11.1:1
Ring Part Number: 980XSY
Standard
Stroke: 74.4mm
Dome/Bowl Volume: +36.5cc
OE Comp. Ratio: 10.3:1
Comp. Height: 32.80mm
Valves Per Cylinder: 2
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Fits:
Porsche 356 B / 912 / 356 SC Super 90 1960-1969 (90 PS).
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9015
Engine Type: 616.16 / 616.36
OE Bore Size: 82.50mm
Bore Sizes Available:
- 82.50mm -1582.30cc, Compression Ratio: 9.5:1
- 83.00mm -1601.54cc, Compression Ratio: 9.6:1
- 83.50mm -1620.89cc, Compression Ratio: 9.71:1
Bore Size 82.50mm
Piston Size: 82.43mm – K9015DA
Over Size: 0mm
Displacement CC: 1582cc
Dome / Bowl Volume: 19.33cc
Wössner Comp Ratio: 9.5:1
Ring Part Number: 825XSY
Bore Size 83.00mm
Piston Size: 82.93mm – K9015D050
Over Size: 0.5mm
Displacement CC: 1620cc
Dome / Bowl Volume: 19.33cc
Wössner Comp Ratio: 9.6:1
Ring Part Number: 830XSY
Bore Size 83.50mm
Piston Size: 83.43mm – K9015D100
Over Size: 1mm
Displacement CC: 1620cc
Dome / Bowl Volume: 19.33cc
Wössner Comp Ratio: 9.71:1
Ring Part Number: 835XSY
Standard
Stroke: 74mm
OE Comp. Ratio: 9.3:1
Comp. Height: 27mm
Valves Per Cylinder: 2
Cylinders: 4
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65