Front Section

Pedal floor board.



Fits:
Porsche 356 A/B/C 1.6L 01/1955-12/1965

Part highlighted in green on diagram.
Click 'Zoom in' for diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450104105

The product you are viewing cross references to these numbers

Rear of front fender.

Fits:
Porsche 356 - 356C

Part highlighted in green on diagram.
Click 'Zoom in' for diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450303

The product you are viewing cross references to these numbers

Repair piece for wing joining plate, plain version


Fits:
Porsche 356 /A 1.1-1.6 01/50-01/57

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450201

The product you are viewing cross references to these numbers

Retainer for pedal board and rubber mat

Fits:
Porsche 356 Pre-A - 1950 to 1955

RSR Fuel filler kit complete with CHROME fuel cap, including bonnet whole strengthen panel
This kit will allow fuel filling through the centre of the bonnet while closed.

Fits:
Porsche 911 2.0-3.3 01/1963 - 07/1989

What it does:
• Allows refuelling with the bonnet closed via a secure cap and filler neck (centre mount).
• Restores proper sealing of the fuel system at the bonnet interface, helping prevent fuel vapour escape and maintaining correct appearance and function.
• Engineered to match the original equipment’s dimensions, fit and finish - ensuring correct alignment, safe fuel operation and the correct restoration look.

Over time, the original filler cap and assembly may suffer from corrosion, sealing deterioration, misalignment or damage - which can lead to fuel leaks, vapour escape, compromised aesthetics or difficulty in refuelling properly. Installing this kit ensures safe fuel system function, correct cap sealing, and restores the original design integrity and appearance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1681150910

The product you are viewing cross references to these numbers

RSR Fuel filler kit complete with SILVER fuel cap, including bonnet whole strengthen panel
This kit will allow fuel filling through the centre of the bonnet while closed.

Fits:
Porsche 911 2.0-3.3 01/1963 - 07/1989

What it does:
• Allows refuelling with the bonnet closed via a secure cap and filler neck (centre mount).
• Restores proper sealing of the fuel system at the bonnet interface, helping prevent fuel vapour escape and maintaining correct appearance and function.
• Engineered to match the original equipment’s dimensions, fit and finish - ensuring correct alignment, safe fuel operation and the correct restoration look.

Over time, the original filler cap and assembly may suffer from corrosion, sealing deterioration, misalignment or damage - which can lead to fuel leaks, vapour escape, compromised aesthetics or difficulty in refuelling properly. Installing this kit ensures safe fuel system function, correct cap sealing, and restores the original design integrity and appearance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1681150410

The product you are viewing cross references to these numbers

RSR fuel filler kit, for mounting in bonnet, without fuel cap.
including bonnet whole strengthen panel

Fits:
Porsche 911 2.0-3.3 01/63-07/89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1681150510

The product you are viewing cross references to these numbers

Scuttle front



Fits:
Porsche 356A Coupe & Cabrio
Porsche 356 B T5 Coupe & Cabrio.
Not for speedster, convertible D and Roadster

This is a handmade panel to replace the part between the front window frame and front hood. Because this is a handmade panel it is possible it may not fit your car 100%. The cars are 50 years or older and due the history of the car, rust or prior accident damage they may need some adjustment to fit.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Please Note:
Availability: On Order
Because this is a handmade product and very time consuming to make we produce these on demand. Please send us a mail for more details about delivery time.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450301700

The product you are viewing cross references to these numbers

Right Upper Trunk Panel.
This isbrand new part which has been purchased and returned due to not meeting expectations of the customer. This part is in good working order. Ideal for restoration specialists, collectors, or workshops looking for components at reduced cost.

Condition: 
It has some slight imperfections but in good / reusable working order. Please see the gallery of images before purchasing.

Fits:


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450210400

The product you are viewing cross references to these numbers

Securing bracket battery tension springs. 
Sold as a pair

Fits:
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1623

Tabs for diagram ref no 51

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64461115300

The product you are viewing cross references to these numbers

Securing clip with rivets for car jack. 
Sold each - 2 required per car

Fits:
Porsche 356 Pre A - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965

Diagram ref no 3 and 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450191300

The product you are viewing cross references to these numbers

Speaker wall

Fits:
Porsche 356A - 1963 to 1965

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450102

The product you are viewing cross references to these numbers

Speaker wall

Fits:
Porsche 356C - 1963 to 1965

Diagram ref no 35

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450102

The product you are viewing cross references to these numbers

Steering Box Access Panel LHD.
The OE Match Steering Box Access Panel LHD is a premium-quality replacement body panel designed to provide secure access to the steering box compartment on left-hand drive compatible classic Porsche models. Manufactured to OE specifications for fit, strength and finish, this precision-engineered panel restores the original appearance while protecting the steering box and surrounding components from dirt, moisture and road debris.  

Fits:

• Porsche 356B 1959-63
• Porsche 356C 1963-65  

Diagram Ref No 15

Manufactured from high-quality pressed steel, the access panel is designed to replicate the original Porsche dimensions, contours and mounting points for straightforward OE-style installation. It is ideal for restoration projects, accident repairs or replacing panels that have become corroded, damaged or misplaced, helping maintain both the structural integrity and originality of the front luggage compartment.  

What This Product Does:

• Covers and protects the steering box access opening.
• Provides access for steering box inspection and maintenance.
• Helps prevent dirt, water and road debris from entering the steering compartment.
• Maintains the integrity of the front body structure.
• Restores the factory appearance of the luggage compartment.
• Supports correct sealing when installed with the appropriate hardware and gasket.
• Replaces damaged, corroded or missing original access panels.
• Forms an essential part of the front body assembly.

Symptoms Of Wear Or Failure:

• Corrosion or rust on the panel.
• Bent, warped or dented panel.
• Loose or poorly fitting access cover.
• Water entering the steering box compartment.
• Dirt or debris accumulating around steering components.
• Missing or damaged mounting holes.
• Increased wind or road noise from the front compartment.
• Visible deterioration affecting the appearance of the luggage compartment.
• Difficulty securing the panel correctly.
• Missing access panel exposing steering components.

Why Replacement Matters:

• The steering box access panel is continually exposed to moisture, road salt, dirt and vibration. Over time, corrosion, impact damage or previous repair work can cause the panel to deteriorate, reducing its ability to protect the steering box compartment and maintain the vehicle's original appearance.
• A damaged or missing access panel allows water, dust and debris to enter the steering compartment, potentially accelerating corrosion of steering components and increasing maintenance requirements. Poorly fitting panels can also detract from the appearance of a restored vehicle and compromise the proper sealing of the front luggage compartment.
• Replacing the original component with the OE Match Steering Box Access Panel restores the correct protection, fit and appearance of the steering box access area. Manufactured to OE standards using high-quality materials, it provides factory-style fitment, excellent durability and dependable long-term performance, making it an ideal solution for maintenance, restoration and preservation of your classic Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450450103

The product you are viewing cross references to these numbers

Steering Box Access Panel LHD.



Fits:
Porsche 356 upto BT5
LHD Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450450101

The product you are viewing cross references to these numbers

Support brace dashboard. 

Fits:
Porsche 356A - 1956 to 1958

Holes can be added/modified to accommodate later cars

Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64450292140

The product you are viewing cross references to these numbers