Handbrake Shoes

Handbrake push rod.


Fits:
Porsche 356 / A 1950-59
Porsche 356B / Carrera 1600 GT

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3564219

The product you are viewing cross references to these numbers

Accessory Kit Brake Shoes 40mm Front & Rear.
The OE Match Accessory Kit for Brake Shoes 40mm Front & Rear is a comprehensive brake hardware kit designed to support the correct installation, operation and retention of drum brake shoes. Manufactured to OE specifications for fit, durability and performance, this accessory kit contains the essential springs, retainers and fitting components required when servicing or replacing brake shoes.  

Fits:

• Porsche 356A 1955-59
• Porsche 356B 1959-63 

 
Designed for use with 40mm brake shoe applications, the kit helps ensure proper brake shoe alignment, consistent return spring tension and reliable drum brake operation. Manufactured from high-quality corrosion-resistant materials, the components are engineered to withstand the demanding environment of the braking system while maintaining long-term performance and safety.  

What This Product Does:

• Provides the hardware required for brake shoe installation.
• Secures brake shoes in the correct operating position.
• Maintains proper brake shoe tension and alignment.
• Supports smooth movement and retraction of brake shoes.
• Helps ensure consistent drum brake performance.
• Reduces the risk of brake noise and uneven operation.
• Supports safe and reliable braking system function.
• Complements brake shoe replacement and restoration work.

Symptoms Of Wear Or Failure:

• Brake squealing, rattling or unusual noises.
• Brake shoes not returning correctly after braking.
• Uneven brake shoe wear.
• Reduced braking efficiency.
• Dragging brakes causing excessive heat build-up.
• Poor brake pedal feel.
• Broken or weakened return springs.
• Corrosion on brake retaining hardware.
• Excessive movement of brake shoes within the drum assembly.
• Premature wear of newly installed brake shoes.

Why Replacement Matters:

• Brake shoe hardware is subjected to continual heat cycles, vibration, moisture, road contamination and repeated braking forces. Over time, springs can lose tension, retaining clips may corrode and mounting hardware can become worn, compromising the effectiveness of the drum brake system.
• Reusing worn hardware during brake shoe replacement can lead to poor brake performance, excessive noise, uneven wear and reduced braking efficiency. In severe cases, faulty hardware can prevent the brake shoes from operating correctly, affecting vehicle safety and increasing maintenance costs.
• Replacing the brake shoe accessory kit whenever brake shoes are serviced helps ensure proper brake operation, maximises the lifespan of new brake components and restores factory braking performance. An OE Match accessory kit provides factory-style fitment, dependable operation and long-term durability, helping maintain safe and reliable braking performance for your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64442001

The product you are viewing cross references to these numbers

Brake shoes (oversize), set.



Fits:
Porsche 356 Pre A (1948 - 1955)
Porsche 356 A (1955 - 1959)
Porsche 356 B (1959 - 1963)

The oversize brake shoes featuring a lining with a width of 40 mm and thickness of 7.5 mm are suitable for used brake drums in compliance with the specifications in the relevant repair manual.

The set comprises four brake shoes.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG35103353

The product you are viewing cross references to these numbers

Brake shoes (standard size), set.



Fits:
Porsche 356 Pre A (1948 - 1955)
Porsche 356 A (1955 - 1959)
Porsche 356 B (1959 - 1963)

With a 40-millimetre wide and standard size pad, the brake shoes are suitable for use with new/mint condition brake drums in accordance with the specifications in the relevant repair instructions.

The set comprises four brake shoes.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG35103303

The product you are viewing cross references to these numbers

Handbrake push rod.

Fits:
Porsche 356 / A 1950-59
Porsche 356B / Carrera 1600 GT

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3564219

The product you are viewing cross references to these numbers

Handbrake shoe hardware kit
1 set per car


Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963

Fits both front and rear drum brakes


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35642168

The product you are viewing cross references to these numbers

Handbrake shoes adjuster screw.



Fits:
Porsche 356 / 356A 1950-59
Porsche 356B / Carrera 1600 GT 1960-65

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35642114

The product you are viewing cross references to these numbers

Handbrake Shoes Adjusting Screw Complete.



Fits:
Porsche 911 1965-89 (inc. Turbo)
Porsche 968 1992-95
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 928 1978-95
Porsche 944 1982-91
Porsche 356 B /C

Diagram ref no 4.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91135209802

The product you are viewing cross references to these numbers

Handbrake shoes compression spring.

Fits:
Porsche 356 / 356 A / 540.1 1950 - 1955
Porsche 356 B / Carrera / 1600 GT 1960 - 1965
Porsche 356 Carrera 2000 upto 1963

Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG64442208

The product you are viewing cross references to these numbers

Handbrake Shoes Lever.
The OE Match Handbrake Shoes Lever is a premium-quality replacement parking brake component designed to transfer force from the handbrake cable to the handbrake shoes on compatible classic Porsche models. Manufactured to OE specifications for fit, strength and durability, this precision-engineered lever ensures smooth, reliable engagement of the parking brake mechanism, providing secure vehicle holding when parked.  

Fits:

• Porsche 356 1950-55
• Porsche 356A 1955-59
• Porsche 356B 1959-63  

Diagram Ref No 38

Manufactured from high-strength automotive-grade steel with a durable corrosion-resistant finish, the handbrake shoe lever is engineered to withstand repeated mechanical loading, vibration, moisture and road contaminants. Precision-formed to replicate the original Porsche dimensions and pivot geometry, it provides direct OE-style fitment, making it ideal for parking brake overhauls, restoration projects or replacing worn or corroded original components.  

What This Product Does:

• Transfers force from the handbrake cable to the brake shoes.
• Enables smooth engagement and release of the parking brake.
• Maintains correct operation of the handbrake mechanism.
• Supports even application of the parking brake shoes.
• Helps ensure secure vehicle holding when parked.
• Restores factory parking brake functionality.
• Reduces excessive play within the handbrake mechanism.
• Forms an essential part of the rear parking brake assembly.

Symptoms Of Wear Or Failure:

• Reduced parking brake effectiveness.
• Excessive handbrake lever travel.
• Uneven application of the handbrake shoes.
• Sticking or binding handbrake mechanism.
• Difficulty releasing the parking brake.
• Corroded or seized lever pivot.
• Bent or damaged lever.
• Rattling noises from the rear brake assembly.
• Inconsistent parking brake operation.
• MOT or vehicle inspection failure due to poor parking brake performance.

Why Replacement Matters:

• The handbrake shoe lever is subjected to continual mechanical movement, moisture, road salt and brake dust throughout its service life. Over time, corrosion, wear or accidental damage can affect the lever's ability to pivot freely and transfer force efficiently to the brake shoes.
• A worn or seized lever can reduce parking brake performance, cause uneven brake shoe application or prevent the handbrake from releasing correctly. This can lead to increased brake wear, poor vehicle security when parked and potential MOT failures.
• Replacing a worn or damaged component with the OE Match Handbrake Shoes Lever restores smooth parking brake operation and reliable braking performance. Manufactured to OE standards using premium-quality corrosion-resistant materials, it provides factory-style fitment, exceptional durability and dependable long-term reliability, helping maintain the safety, functionality and originality expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3564214

The product you are viewing cross references to these numbers

Handbrake shoes small return spring.



Fits:
Porsche 356 1950-65

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35642172

The product you are viewing cross references to these numbers

Replacement Handbrake Shoes, Set Of 4.
The OE Match Replacement Handbrake Shoes, Set of 4  is a premium-quality replacement braking component designed to restore the reliable operation of the mechanical parking brake on compatible classic Porsche models. Manufactured to OE specifications for fit, friction performance and durability, these handbrake shoes provide dependable holding power, ensuring the vehicle remains securely stationary when parked.  

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 356B 1959-63Porsche 356C 1963-65 

Each shoe is manufactured from high-strength steel and bonded with a high-quality friction lining engineered to provide consistent braking performance, low wear and long service life. Precision-manufactured to the original Porsche dimensions, the set offers direct OE-style installation, making it ideal for routine brake servicing, restoration projects or replacing worn or contaminated parking brake shoes.

What This Product Does:

• Provides the friction surface for the mechanical parking brake.
• Holds the vehicle securely when the handbrake is applied.
• Restores effective parking brake performance.
• Delivers consistent braking force with minimal wear.
• Supports safe vehicle parking on inclines.
• Helps maintain correct handbrake adjustment.
• Replaces worn, damaged or contaminated handbrake shoes.
• Forms an essential part of the rear parking brake system.

Symptoms Of Wear Or Failure:

• Reduced handbrake holding power.
• Vehicle rolling when parked on an incline.
• Excessive handbrake lever travel.
• Difficulty achieving correct handbrake adjustment.
• Squealing or scraping noises when the handbrake is applied.
• Uneven or excessive wear on the friction lining.
• Cracked, glazed or oil-contaminated brake linings.
• Poor MOT or roadworthiness inspection results relating to parking brake efficiency.
• Metal-to-metal contact in severe cases.
• Visible deterioration of the brake shoe lining.

Why Replacement Matters:

• Handbrake shoes are subjected to repeated friction, heat, moisture and contamination throughout their service life. Over time, the friction material naturally wears down and may become glazed, cracked or contaminated by grease or brake fluid, significantly reducing the effectiveness of the parking brake.
• A worn set of handbrake shoes can compromise the vehicle's ability to remain securely parked, particularly on slopes, while also making it difficult to correctly adjust the parking brake mechanism. Continued use of excessively worn shoes may damage the brake drum surface and other parking brake components, increasing repair costs.
• Replacing the original components with the OE Match Replacement Handbrake Shoes restores dependable parking brake performance and safe vehicle retention. Manufactured to OE standards using premium-quality friction materials, this set of four provides factory-style fitment, excellent durability and reliable long-term braking performance, helping maintain the safety, functionality and originality of your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135290614

The product you are viewing cross references to these numbers

Set of fastening parts Brake shoe Front and rear axle consisting of: 8x screw, 6x tension spring, 8x roll pin, 4x tension spring, 8x compression spring, 8x adjusting screw, 8x concave washer.



Fits:
Porsche 356 (1950 to 1964)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG35103301

The product you are viewing cross references to these numbers

Shouldered bolt bearing pin assembly for brake shoe lever.
Sold as 1 assembly each side - 2 required per car

Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959

Porsche 356B - 1959 to 1963

This is the bearing pin is also known as the brake drum lever bolt and comes complete with a wavy washer, split washer and nut.
Ensure your brakes are properly maintained with this brand-new bearing bolt.

Sold as a single (1) complete unit.

Diagram ref no 39, 40, 41 and 42

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35642207

The product you are viewing cross references to these numbers

Spring disc handbrake shoe. 

Sold each



Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965
Porsche 924 2.0ltr - 1976 to 1985

8 required for 356
4 required for 924

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

251609289

The product you are viewing cross references to these numbers