Mirrors & Parts

Teardrop Mirror Glass. FLAT GLASS



Fits:
Porsche 911 1974-89*
Porsche 964 1990-94*
Porsche 928 1978-95*
Porsche 993 1994-94
*Fit your car is fitting with Teardrop mirrors.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96573103

The product you are viewing cross references to these numbers

Aluminium Aero Bullet Mirror - Flag mount, in Chrome finish.
A true bolt-on replacement for factory flag mirrors on G-body 911, 964 and 993 (1975–1998). The re-engineered base reuses the OEM holes and covers the old gasket/paint shadow, so you get a cleaner look without touching paint or bodywork.

Fits:
Porsche 911 / 930 models 1975 – 1998 with factory flag-mount doors
  *** Note: 964 and 993 door shells differ. Adaptation may be possible; confirmation is recommended before ordering

Sleeker lines. Smarter mounts. Bigger view.

 The Aero Bullet Mirror line is the third-generation mirror family designed for classic Porsche 911, 964, 993, and 914 models. The arm has been re-sculpted for a more flowing profile, the base geometry has been refined, and the compact bullet housing with custom convex glass has been retained. The result is a wide, confidence-inspiring field of view in a smaller, lighter package.

A true bolt-on replacement for factory flag mirrors on G-body 911, 930, 964, and 993 models. The re-engineered base reuses the OEM mounting holes and is shaped to cover the factory gasket and paint shadow, allowing the bulk of the original mirrors to be removed without disturbing the paint. The compact bullet housing and custom convex glass provide a wider field of view in a smaller, lighter package.

Highlights
•  Direct bolt-on installation using factory flag-mirror holes
•  Base covers the OEM gasket and paint area for a clean finish
•  Billet aluminium mirror and base offer lightweight, rigid, and durable construction
•  Optics:  Custom convex glass provides near-zero blind spots when properly aimed, for driver and passenger sides
•  Weight: Lighter than a pair of OEM flag mirrors
•  Available finishes: Satin Black, Satin Silver or Chrome
•  Options: Left, Right, or Pair

What’s Included
•  Mirror assembly in Left, Right, or Pair configuration, with convex glass
•  Paint-friendly gasket and stainless-steel hardware
•  Quick installation and aiming guide

Installation Overview
The OEM flag mirror is removed, the mounting area is cleaned, and the gasket is positioned before the Aero base is installed through the factory holes. The hardware should be tightened evenly. No bodywork is required, and the base covers the original paint shadow for an immediate visual upgrade.

FAQs
  •   Will the old paint line be covered?
  Yes. The 3.0 base is designed to cover the OEM gasket area.

  •   Does the door card need to be removed?
  Access varies by vehicle. Some models allow access through a small inner cover, while others may require partial loosening of the door card.

  •   Is the field of view actually improved?
  Yes. The custom convex optics expand the field of view while allowing the housing to remain compact.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AKABFLAGCHR

The product you are viewing cross references to these numbers

Aluminium Aero Bullet Mirror - Flag mount, in Satin Black finish.
A true bolt-on replacement for factory flag mirrors on G-body 911, 964 and 993 (1975–1998). The re-engineered base reuses the OEM holes and covers the old gasket/paint shadow, so you get a cleaner look without touching paint or bodywork.

Fits:
Porsche 911 / 930 models 1975 – 1998 with factory flag-mount doors
  *** Note: 964 and 993 door shells differ. Adaptation may be possible; confirmation is recommended before ordering

Sleeker lines. Smarter mounts. Bigger view.

 The Aero Bullet Mirror line is the third-generation mirror family designed for classic Porsche 911, 964, 993, and 914 models. The arm has been re-sculpted for a more flowing profile, the base geometry has been refined, and the compact bullet housing with custom convex glass has been retained. The result is a wide, confidence-inspiring field of view in a smaller, lighter package.

A true bolt-on replacement for factory flag mirrors on G-body 911, 930, 964, and 993 models. The re-engineered base reuses the OEM mounting holes and is shaped to cover the factory gasket and paint shadow, allowing the bulk of the original mirrors to be removed without disturbing the paint. The compact bullet housing and custom convex glass provide a wider field of view in a smaller, lighter package.

Highlights
•  Direct bolt-on installation using factory flag-mirror holes
•  Base covers the OEM gasket and paint area for a clean finish
•  Billet aluminium mirror and base offer lightweight, rigid, and durable construction
•  Optics:  Custom convex glass provides near-zero blind spots when properly aimed, for driver and passenger sides
•  Weight: Lighter than a pair of OEM flag mirrors
•  Available finishes: Satin Black, Satin Silver or Chrome
•  Options: Left, Right, or Pair

What’s Included
•  Mirror assembly in Left, Right, or Pair configuration, with convex glass
•  Paint-friendly gasket and stainless-steel hardware
•  Quick installation and aiming guide

Installation Overview
The OEM flag mirror is removed, the mounting area is cleaned, and the gasket is positioned before the Aero base is installed through the factory holes. The hardware should be tightened evenly. No bodywork is required, and the base covers the original paint shadow for an immediate visual upgrade.

FAQs
  •   Will the old paint line be covered?
  Yes. The 3.0 base is designed to cover the OEM gasket area.

  •   Does the door card need to be removed?
  Access varies by vehicle. Some models allow access through a small inner cover, while others may require partial loosening of the door card.

  •   Is the field of view actually improved?
  Yes. The custom convex optics expand the field of view while allowing the housing to remain compact.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AKABFLAGBLK

The product you are viewing cross references to these numbers

Aluminium Aero Bullet Mirror - Flag mount, in Silver finish.
A true bolt-on replacement for factory flag mirrors on G-body 911, 964 and 993 (1975–1998). The re-engineered base reuses the OEM holes and covers the old gasket/paint shadow, so you get a cleaner look without touching paint or bodywork.

Fits:
Porsche 911 / 930 models 1975 – 1998 with factory flag-mount doors
  *** Note: 964 and 993 door shells differ. Adaptation may be possible; confirmation is recommended before ordering

Sleeker lines. Smarter mounts. Bigger view.

 The Aero Bullet Mirror line is the third-generation mirror family designed for classic Porsche 911, 964, 993, and 914 models. The arm has been re-sculpted for a more flowing profile, the base geometry has been refined, and the compact bullet housing with custom convex glass has been retained. The result is a wide, confidence-inspiring field of view in a smaller, lighter package.

A true bolt-on replacement for factory flag mirrors on G-body 911, 930, 964, and 993 models. The re-engineered base reuses the OEM mounting holes and is shaped to cover the factory gasket and paint shadow, allowing the bulk of the original mirrors to be removed without disturbing the paint. The compact bullet housing and custom convex glass provide a wider field of view in a smaller, lighter package.

Highlights
•  Direct bolt-on installation using factory flag-mirror holes
•  Base covers the OEM gasket and paint area for a clean finish
•  Billet aluminium mirror and base offer lightweight, rigid, and durable construction
•  Optics:  Custom convex glass provides near-zero blind spots when properly aimed, for driver and passenger sides
•  Weight: Lighter than a pair of OEM flag mirrors
•  Available finishes: Satin Black, Satin Silver or Chrome
•  Options: Left, Right, or Pair

What’s Included
•  Mirror assembly in Left, Right, or Pair configuration, with convex glass
•  Paint-friendly gasket and stainless-steel hardware
•  Quick installation and aiming guide

Installation Overview
The OEM flag mirror is removed, the mounting area is cleaned, and the gasket is positioned before the Aero base is installed through the factory holes. The hardware should be tightened evenly. No bodywork is required, and the base covers the original paint shadow for an immediate visual upgrade.

FAQs
  •   Will the old paint line be covered?
  Yes. The 3.0 base is designed to cover the OEM gasket area.

  •   Does the door card need to be removed?
  Access varies by vehicle. Some models allow access through a small inner cover, while others may require partial loosening of the door card.

  •   Is the field of view actually improved?
  Yes. The custom convex optics expand the field of view while allowing the housing to remain compact.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AKABFLAGSLV

The product you are viewing cross references to these numbers

Aluminium Aero Bullet Mirror - Longhood / Universal 3.0, (20–71 mm), in Chrome finish
A slim, period-correct mirror for early cars and customs with a two-hole mount that adapts to 20–71 mm centres. Reuse many legacy hole patterns - or lay out two small, clean holes for a factory-tidy install. Same compact bullet housing with custom convex glass for modern visibility.

Fits:
Porsche 911 / 912 1965 – 1974
 *** Custom applications reusing or creating 20–71 mm two-hole spacing

Slim profile. Big view. Easy retrofits.

Designed for early cars and hot-rods, the Longhood/Universal uses a two-hole mount that adapts to 20–71 mm centres. Reuse many legacy hole patterns or drill two small, clean holes for a factory-tidy install. The compact bullet housing and custom convex glass deliver modern visibility with a period-correct silhouette.

Highlights
•  Universal two-hole pattern: fits 20–71 mm centres
•  Low-profile base with flowing arm — period-correct look
•  Billet aluminium mirror + base; stainless hardware
•  Optics:  Custom convex glass provides near-zero blind spots when properly aimed, for driver and passenger sides
•  Finishes: Satin Black, Satin Silver or Chrome 
•  Options: Left, Right, or Pair

What’s Included
•  Mirror assembly (Left, Right, or Pair) with convex glass
•  Paint-friendly gasket, universal backing plate, stainless hardware
•  Layout template + aiming guide

Install Overview
Measure existing holes; if within 20–71 mm, reuse them. Otherwise, mark and drill two small holes using the included layout guide. Place gasket, position base, add the backing plate inside the door, and tighten hardware evenly for a clean, stable mount.

FAQs
   •  Will it hide my old holes?
   Often yes if they’re within 20–71 mm; otherwise fill + re-drill for best results.

   •  Does convex look “too small”?
   The bullet housing is compact by design; convex glass provides the wide view you’re after but just enough to eliminate blind spots.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AK73LUCHR

The product you are viewing cross references to these numbers

Aluminium Aero Bullet Mirror - Longhood / Universal 3.0, (20–71 mm), in Satin Black
A slim, period-correct mirror for early cars and customs with a two-hole mount that adapts to 20–71 mm centres. Reuse many legacy hole patterns - or lay out two small, clean holes for a factory-tidy install. Same compact bullet housing with custom convex glass for modern visibility.

Fits:
Porsche 911 / 912 1965 – 1974
 *** Custom applications reusing or creating 20–71 mm two-hole spacing

Slim profile. Big view. Easy retrofits.

Designed for early cars and hot-rods, the Longhood/Universal uses a two-hole mount that adapts to 20–71 mm centers. Reuse many legacy hole patterns or drill two small, clean holes for a factory-tidy install. The compact bullet housing and custom convex glass deliver modern visibility with a period-correct silhouette.

Highlights
•  Universal two-hole pattern: fits 20–71 mm centres
•  Low-profile base with flowing arm — period-correct look
•  Billet aluminium mirror + base; stainless hardware
•  Optics:  Custom convex glass provides near-zero blind spots when properly aimed, for driver and passenger sides
•  Finishes: Satin Black, Satin Silver or Chrome 
•  Options: Left, Right, or Pair

What’s Included
•  Mirror assembly (Left, Right, or Pair) with convex glass
•  Paint-friendly gasket, universal backing plate, stainless hardware
•  Layout template + aiming guide

Install Overview
Measure existing holes; if within 20–71 mm, reuse them. Otherwise, mark and drill two small holes using the included layout guide. Place gasket, position base, add the backing plate inside the door, and tighten hardware evenly for a clean, stable mount.

FAQs
   •  Will it hide my old holes?
   Often yes if they’re within 20–71 mm; otherwise fill + re-drill for best results.

   •  Does convex look “too small”?
   The bullet housing is compact by design; convex glass provides the wide view you’re after but just enough to eliminate blind spots.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AK73LUBLK

The product you are viewing cross references to these numbers

Aluminium Aero Bullet Mirror - Longhood / Universal 3.0, (20–71 mm), in Silver
A slim, period-correct mirror for early cars and customs with a two-hole mount that adapts to 20–71 mm centres. Reuse many legacy hole patterns - or lay out two small, clean holes for a factory-tidy install. Same compact bullet housing with custom convex glass for modern visibility.

Fits:
Porsche 911 / 912 1965 – 1974
 *** Custom applications reusing or creating 20–71 mm two-hole spacing

Slim profile. Big view. Easy retrofits.

Designed for early cars and hot-rods, the Longhood/Universal uses a two-hole mount that adapts to 20–71 mm centres. Reuse many legacy hole patterns or drill two small, clean holes for a factory-tidy install. The compact bullet housing and custom convex glass deliver modern visibility with a period-correct silhouette.

Highlights
•  Universal two-hole pattern: fits 20–71 mm centres
•  Low-profile base with flowing arm — period-correct look
•  Billet aluminium mirror + base; stainless hardware
•  Optics:  Custom convex glass provides near-zero blind spots when properly aimed, for driver and passenger sides
•  Finishes: Satin Black, Satin Silver or Chrome 
•  Options: Left, Right, or Pair

What’s Included
•  Mirror assembly (Left, Right, or Pair) with convex glass
•  Paint-friendly gasket, universal backing plate, stainless hardware
•  Layout template + aiming guide

Install Overview
Measure existing holes; if within 20–71 mm, reuse them. Otherwise, mark and drill two small holes using the included layout guide. Place gasket, position base, add the backing plate inside the door, and tighten hardware evenly for a clean, stable mount.

FAQs
   •  Will it hide my old holes?
   Often yes if they’re within 20–71 mm; otherwise fill + re-drill for best results.

   •  Does convex look “too small”?
   The bullet housing is compact by design; convex glass provides the wide view you’re after but just enough to eliminate blind spots.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AK73LUSLV

The product you are viewing cross references to these numbers

Aluminium bullet mirror - Flag mount, in Satin Black finish.

Fits:
Porsche 911 1975-1988 Flag Mount

• Custom designed convex mirror glass so you can see great out of both mirrors with no blind spots
• Light weight billet Aluminium // -4+ lbs vs stock flag mirrors

Tired of the stock Porsche 911 SC Flag Mirrors but don't want to have to repaint your doors to update the look of your mirrors? Us too, we have spent over a year designing and testing these all Aluminium bullet mirrors that are an easy bolt on replacement for the large stock Flag Mirrors on all 1975-1988 Porsche 911's. 

Easy to install and also return back to stock mirrors with no body work needed. (Uses the stock mounting holes from the Flag Mirrors).

Comes in two finishes a Satin Black finish or a Satin Silver finish.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AKFLAGBLK

The product you are viewing cross references to these numbers

Aluminium bullet mirror set - Wing Window mount. 
Sold as a set of both Driver and Passenger mirrors
Available in: Black or Chrome finish

Fits:
Porsche 911
Porsche 964
Porsche 993

• CNC Aluminium, Mirror Polished and Chrome Plated
• Custom made convex mirror glass so you can see great out of both mirrors
• Spring loaded front mirror adjustment

Custom Porsche 911 Wing Window mounted bullet mirrors, fully custom CNC mirrors designed to be easily installed in plastic vent windows on the Porsche 911 (Do not come with Plastic windows). Supplied with gaskets, mounts and covers to make your install easy and clean, just need to drill 2 holes in the plastic vent windows and install.

Must be installed in plastic Triangle windows (not included). You can add them in the basket stage.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AKWW

The product you are viewing cross references to these numbers

Aluminium bullet mirror set, Chrome Plated. 
PAIR

Fits:
Porsche 911 1965-1973

• New custom made convex mirror glass so you can see great out of both mirrors

• New Passenger Arm to allow for better view with new glass
• Reduced the weight of a pair by over 1.1 lbs

Tired of the stock early Porsche 911 Mirrors and want some sweet looking bullet mirrors?
Us too, we have spent over a year designing and testing these all Aluminium bullet mirrors that are an easy bolt on replacement for stock Mirrors on all 1965-1973 Porsche 911's with stock 40mm distance mount holes.

Easy to install and also return back to stock mirrors with no body work needed. (Uses the stock mounting holes that are 40mm apart)

Chrome Plated Version of our famous mirrors, great for bringing a classic touch to our cars.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AK73CHRPAIR

The product you are viewing cross references to these numbers

Aluminium bullet mirror, in Satin Silver Bead Blasted finish.
PAIR

Fits:
Porsche 911 1965-1973

• New custom made convex mirror glass so you can see great out of both mirrors

• New Passenger Arm to allow for better view with new glass
• Reduced the weight of a pair by over 1.1 lbs

Tired of the stock early Porsche 911 Mirrors and want some sweet looking bullet mirrors?
Us too, we have spent over a year designing and testing these all Aluminium bullet mirrors that are an easy bolt on replacement for stock Mirrors on all 1965-1973 Porsche 911's with stock 40mm distance mount holes.

Easy to install and also return back to stock mirrors with no body work needed. (Uses the stock mounting holes that are 40mm apart)

Comes in Satin Silver Bead Blasted finish with clear anodized finish.

Please note: This part is on special order terms. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

AK73SLVPAIR

The product you are viewing cross references to these numbers

Aluminum Speedster Style Mirrors.

Fits:
Porsche 911 G-Model 1975 - 1989
Porsche 964 1989 - 1994
Porsche 993 1995 - 1998

Solid high-quality aluminium, the mirrors are mounted just as the original mirrors were, and are compatible with the original Porsche mirror adjustment cables, as we use OEM Porsche electric mirror adjustment motors.

Available in polished or satin aluminium, and matte black finishes.

Note: These will not fit the older (1974-75) G-Model OEM doors with two screws mounting.

Please note: This part is on special order terms. Delivery time is normally 5-6 weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901731

The product you are viewing cross references to these numbers