Indicators Front

Long Hood DLS Style Front Indicators, PAIR.

Fits:
Porsche 911 F-Model 1965 - 1973
Porsche 911 G-Model 1974 - 1989
Porsche 964
Porsche 993

These are a fantastic update, very clean and tastefully designed with no visible mounting crews. The lenses for each pair are milled from a solid block of acrylic (also known as PMMA) and finished to perfection and exact fitment. They install directly into the stock location. Available in standard orange or light grey lens tints.

NOTE: This product is not DOT certified and has no e-markings, and is therefore only for track or display use.

Please note: This part is on special order terms. Delivery time is normally 5-6 weeks. It is not a subject to cancellation or return if not required.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911631DLS

The product you are viewing cross references to these numbers

Front indicator lens seal.



Fits:
Porsche 911 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163196100

The product you are viewing cross references to these numbers

Front indicator lens seal.



Fits:
Porsche 911 2.7-3.3 08/73-07/89

Click 'Zoom in' for large parts diagram.
Diagram ref no 25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163196100

The product you are viewing cross references to these numbers

Indicator Bulbs 12V/12W Single filament. Amber chromed
Pack of 2

Silver Finish, OFFSET PIN TYPE.

Ultra clear look, still flashing amber

Indicator Lens Screw Washer, Rubber / Neoprene.

Ensure a secure and weather-resistant installation of your classic Porsche indicator lenses with this OE Match Indicator Lens Screw Washer, manufactured from durable rubber/neoprene as a direct replacement. Produced to OE-style specifications, this sealing washer fits beneath the indicator lens fixing screw, cushioning the fixing point while helping to prevent water ingress and protecting the lens from damage during installation.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)  

Over time, the original rubber washers can harden, crack, compress, or perish through exposure to heat, UV light, and the elements. A deteriorated washer may no longer seal effectively, allowing moisture to enter the lamp assembly or increasing the risk of lens damage from overtightening. This OE Match replacement restores the correct sealing and protection, making it ideal for maintenance and concours-quality restoration projects.  

What This Product Does:

• Provides a weather-resistant seal around the fixing screw.
• Cushions the indicator lens during installation.
• Helps prevent water entering the lamp assembly.
• Protects the lens from cracking due to direct screw pressure.
• Reduces vibration at the fixing point.
• Maintains the original OE-style installation.
• Replaces hardened, damaged, or missing sealing washers.

Symptoms Of Wear Or Failure:

• Hardened or cracked rubber washer.
• Perished or deteriorated sealing material.
• Missing screw washer.
• Water or condensation inside the indicator lens.
• Corrosion around the fixing screw.
• Loose indicator lens despite correctly tightened screws.
• Lens damage caused by direct screw contact.
• Compressed or flattened washer.
• Signs of moisture entering the lamp assembly.
• Age-related deterioration of the original rubber.

Why Replacement Matters:

• Although small, the indicator lens screw washer performs an important sealing and protective function. It helps prevent water entering the lamp assembly while cushioning the fixing screw to reduce stress on the indicator lens. A hardened or missing washer can lead to moisture ingress, corrosion, lens damage, and premature deterioration of lighting components.
• Replacing worn sealing washers restores the original OE-style installation, helping to protect both the lens and lamp assembly while maintaining reliable long-term performance. Manufactured to OE-style specifications, this rubber/neoprene washer provides the correct fit and durability for classic Porsche maintenance and restoration.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163100020

The product you are viewing cross references to these numbers

Indicator Lens Screw.

Secure your classic Pocrsche indicator lenses correctly with this OE Match Indicator Lens Screw, manufactured as a direct replacement. Produced to OE-style specifications, this fixing screw is designed to securely fasten the front or rear indicator lens to the lamp housing, ensuring the lens remains firmly in place while maintaining the original factory appearance.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)  

Over time, original screws can become corroded, seized, damaged, or stripped through repeated removal during maintenance or restoration work. Worn fixings may prevent the lens from securing properly, allowing moisture to enter the light unit or causing the lens to loosen. This OE Match replacement restores a secure fit and is ideal for routine servicing, repairs, and concours-quality restorations.  

What This Product Does:

• Secures the indicator lens to the lamp housing.
• Maintains correct lens alignment.
• Helps create a secure weather-resistant fit.
• Prevents the lens from becoming loose during vehicle operation.
• Restores the original factory appearance.
• Provides OE-style fit and thread specification.
• Replaces worn, corroded, or damaged original fixings.

Symptoms Of Wear Or Failure:

• Corroded or rusted fixing screws.
• Rounded or stripped screw heads.
• Seized or difficult-to-remove fixings.
• Loose or rattling indicator lens.
• Lens not securing correctly.
• Missing indicator lens screws.
• Water or moisture entering the lamp assembly.
• Cracked lens caused by incorrect or damaged fixings.
• Previous incorrect replacement screws fitted.
• Fixings showing age-related deterioration.

Why Replacement Matters:

• Although small, the indicator lens screw plays an important role in securing the lens and protecting the lamp assembly from water, dirt, and vibration. Damaged or missing fixings can allow the lens to loosen or leak, potentially leading to corrosion, electrical faults, or damage to the light unit.
• Replacing worn or corroded screws restores a secure OE-style installation, helping to maintain reliable lighting performance while preserving the authentic appearance of your classic Porsche. Manufactured to OE-style specifications, this replacement provides the correct fit and finish for long-lasting service and restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163100010

The product you are viewing cross references to these numbers

Indicator lens, Front.
This front indicator lens covers and protects the turn signal bulb while providing the correct colour and light diffusion so that your directional indications are vivid and easily seen by other road users. It helps maintain legal signal performance and preserves the classic Porsche lighting appearance.
Fits left and right. Price is for each lens.

Available in: standard amber, clear, or smoked finish variants.

Fits:
Porsche 911 SC / 3.2 1974 - 1989

Installed over the front signal light bulb, this lens diffuses the light and channels it outward so that your turn signals are bright, even, and properly recognisable. It also serves to protect the bulb and housing from dust, moisture, and debris - ensuring reliable operation over time.

Original front indicator lenses can become faded, cracked, or worn through exposure to UV light and road conditions. A damaged lens can reduce signal visibility and detract from your Porsche’s classic appearance. Replacing with an fresh lens restores proper signal clarity, enhances safety, and helps maintain the authentic look of your vintage 911.

When to replace:
•  Lens is cracked or chipped
•  Faded or cloudy from age and UV exposure
•  Reduced or inconsistent signal visibility
•  During bodywork, repainting, or restoration projects
•  After removal of the indicator housing



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9116319140

The product you are viewing cross references to these numbers

Indicator unit and lens, Front. Amber



Fits:
Fits: Left and right side
Porsche 911 SC/3.2 1974-89

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91163140500

The product you are viewing cross references to these numbers

Speed nut clip - rear lamp housing. 
This M5 captive lock-nut (speed nut) is used for securing lighting on classic Porsche 911 models. It replicates the fit, function and material specifications of the original Porsche part.
Sold each, 4 required.

Fits:
Porsche 911 1965 - 1989
Porsche 911 (930) Turbo 1975 - 7989

Diagram ref no 18

• Thread size: M5
• Application: Tail-light housings, turn-signal/indicator housings on the Porsche 911 and 912 (1969-89)

This speed nut provides a secure, vibration-resistant anchoring point for parts that require frequent removal or tight fit-up. The captive design ensures the nut remains in position during assembly and removal processes, reducing fastener loss and ensuring consistent mount integrity.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950731212

The product you are viewing cross references to these numbers