Front Wiper Arms & Blades

Wiper Arm Linkage Rubber Bush, Front.
The Porsche Wiper Arm Linkage Rubber Bush is a genuine OEM component designed to cushion and stabilize the wiper arm shaft within the front wiper linkage assembly. This rubber bushing eliminates excess play, reduces vibration, and ensures smooth, consistent wiper operation.
Sold Each.
x2 Required Per Car.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93
• Porsche 924 2.0L 1976-79
• Porsche 924 2.0L 1980-85
• Porsche 924 Turbo 2.0L 1979-81
• Porsche 924 Turbo 2.0L 1982-84
• Porsche 924 Carrera GT 2.0L 1981
• Porsche 924 Carrera GTS 2.0L 1982
• Porsche 924S 2.5L 1986-87
• Porsche 924S 2.5L 1988
• Porsche 944 2.5L 8V 1982-87
• Porsche 928 4.5L 1978-82
• Porsche 928S 4.7L 1981-83
• Porsche 928S2 4.7L 1984-86
• Porsche 914 (1970-1976)

What This Product Does:

• The rubber bush cushions the wiper shaft / linkage pivot / mount, reducing play, vibration, and ensuring the wiper arm linkage operates smoothly.
• It helps maintain correct alignment between the wiper arm and pivot, so that the wiper blade contacts the windshield uniformly without skipping or lifting.
• It prevents metal-to-metal contact in the wiper linkage, which protects shafts, mounts, and the linkage parts from wear and vibration noise.

Symptoms Of A Worn / Damaged Rubber Bush:

• Wiper arm play or looseness — the arm may wiggle slightly or not feel tight at the pivot.
  
• Chattering, skipping, or noise when the wiper moves — due to uneven pressure or vibration in the linkage.
  
• Non-uniform wiping / streaks — parts of the windshield might not be cleared properly because the blade isn’t held firmly and consistently.
  
• Unusual vibration or rattle from the wiper mechanism, especially on rough roads or at higher speeds.
  
• Visible cracks or deterioration in the rubber bush when inspecting it — it might be hardened, split, or deformed.
  
  

Why Replacement Matters:

• Restores precise, quiet wiper operation — ensuring the wiper blade maintains good contact across the windshield, even under stress.
  
• Prevents premature wear on linkage, shafts, and mounts by reducing unwanted movement and vibration.
  
• Helps maintain the safety and visibility — poor wiping performance in rain or snow can reduce driver sight.
  
• Keeps the wiper assembly more durable — a degraded bushing can lead to more significant repair down the line.

Diagram Ref No 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162892400

The product you are viewing cross references to these numbers

Sealing Rings For Porsche Wiper Linkage.
Set Of 4.

Fits:
For Cars With Windshield Wiper
Porsche 911 F / G / 964
Porsche 912 
Porsche 914
Porsche 924
Porsche 944 (1981 - 1985)
Porsche 928 (1977 - 1986)

This set of two upper and two lower sealing ring is used to seal the wiper linkage and is a high quality choice to the outpriced original.

Diagram Ref No 7 And 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162892SET

The product you are viewing cross references to these numbers

Wiper arm SET OF 2, BLACK.



Fits:
Porsche 911 2.0L-2.4L 08/1967-07/1973
Porsche 912 1.6L 08/1967-12/1969

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162801415

The product you are viewing cross references to these numbers

Early design wiper arms fit LHD Cars Only
Black Finish, fits left & right side, complete with blades

Fits:
Porsche 911 1965-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162893000

The product you are viewing cross references to these numbers

Early Design Wiper Arms Fit LHD Cars Only.
Silver Finish, Fits Left & Right Side, Complete With Blades.
Restore reliable windscreen wiping performance and the authentic appearance of your classic Porsche with these OE Match Early Design Wiper Arms, manufactured as direct replacements. Designed specifically for left-hand drive (LHD) vehicles, these wiper arms are manufactured to OE-style specifications, ensuring the correct fit, sweep angle, and factory-style appearance.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1978-1983 3.0L / SC
• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930)
• Porsche 964 (911) C2 1989-93
• Porsche 964 (911) C4 1989-93
• Porsche 964 (911) RS 3.6L 1991-93
• Porsche 964 (911) RS 3.8L 1991-93
• Porsche 964 (911) TURBO 3.3L 1991-93
• Porsche 964 (911) TURBO 3.6L 1991-93  

Wiper arms are responsible for maintaining consistent pressure between the wiper blades and the windscreen, allowing water, dirt, and debris to be cleared effectively. Over time, the original arms can become bent, corroded, or suffer from weakened springs, reducing wiping efficiency and visibility. These OE Match replacements restore dependable performance while preserving the period-correct look of your Porsche, making them ideal for routine maintenance and concours-quality restorations.  

What This Product Does:

• Securely hold the wiper blades in the correct position.
• Apply consistent pressure across the windscreen.
• Ensure an effective wiping pattern for improved visibility.
• Help remove rain, dirt, and road spray from the glass.
• Restore smooth and reliable windscreen wiper operation.
• Maintain the original early-style factory appearance.
• Replace worn, bent, or corroded original wiper arms.

Symptoms Of Wear Or Failure:

• Streaking or uneven wiping despite new blades.
• Wiper blades lifting away from the windscreen.
• Bent or distorted wiper arms.
• Weak spring tension causing poor blade contact.
• Corrosion, rust, or pitting on the arms.
• Excessive movement or looseness on the spindle.
• Wipers failing to park correctly.
• Damaged blade attachment points.
• Chipped or deteriorated finish.
• Excessive vibration or chatter during operation.

Why Replacement Matters:

• Worn or damaged wiper arms reduce the effectiveness of the windscreen wipers, leading to poor visibility during wet weather and increasing driver fatigue. Weak spring tension or bent arms can prevent the blades from maintaining consistent contact with the glass, leaving streaks or unwiped areas that compromise safety.
• Replacing worn wiper arms restores the correct blade pressure and wiping pattern, improving visibility in all weather conditions. OE Match early-design wiper arms also preserve the original appearance of the vehicle, making them an ideal choice for classic Porsche maintenance and restoration while ensuring dependable performance and factory-style fit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162893000

The product you are viewing cross references to these numbers

Front Wiper Arm, Right Side Only, BLACK.
Restore reliable windscreen wiping performance and the original appearance of your Porsche with this OE Match Front Wiper Arm, Right Side Only, Black, manufactured as a direct replacement. Produced to OE-style specifications, this replacement wiper arm provides the correct fit, spring tension, and black finish to ensure consistent contact between the wiper blade and windscreen.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)  

The wiper arm is responsible for maintaining even pressure across the wiper blade, allowing effective removal of rain, dirt, and road spray for maximum visibility in adverse weather conditions. Over time, the arm can become bent, corroded, weakened, or suffer from worn mounting splines, resulting in poor wiping performance and reduced driver visibility. This OE Match replacement restores smooth, dependable operation while preserving the factory appearance of your Porsche.  

What This Product Does:

• Supports and positions the right-hand wiper blade.
• Maintains correct spring pressure against the windscreen.
• Ensures smooth and efficient wiping performance.
• Improves visibility in wet weather conditions.
• Provides an OE-style fit and black finish.
• Replaces worn, bent, or corroded original wiper arms.
• Restores the original appearance of the windscreen wiper system.

Symptoms Of Wear Or Failure:

• Poor or uneven wiping performance.
• Wiper blade lifting from the windscreen.
• Bent or damaged wiper arm.
• Corrosion affecting the arm or mounting.
• Worn mounting splines causing slipping.
• Excessive vibration or chatter during operation.
• Uneven pressure across the wiper blade.
• Cosmetic deterioration of the black finish.

Why Replacement Matters:

• The front wiper arm plays a critical role in maintaining clear visibility by keeping consistent pressure on the wiper blade throughout its sweep. A worn or damaged arm can significantly reduce wiping efficiency, impair visibility in poor weather, and place additional strain on the wiper mechanism.
• Replacing a worn wiper arm restores smooth operation, improves driving safety, and preserves the original appearance of your Porsche. Manufactured to OE-style specifications, this OE Match replacement offers the correct fit, spring tension, and durable black finish, making it an ideal choice for routine maintenance and concours-quality restoration projects.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90162801500

The product you are viewing cross references to these numbers

Polished Metal Front Wiper Blade 
Sold each - 2 required per car

Maintain excellent visibility while preserving the period-correct appearance of your classic Porsche with this OE Match Polished Metal Front Wiper Blade (13"). Manufactured to OE specifications, this premium replacement combines a polished metal frame with a high-quality rubber wiping element to deliver reliable wiping performance and an authentic factory-style finish.

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Designed as a direct replacement for the original component, this 13-inch front wiper blade provides smooth, even contact across the windscreen, effectively clearing rain, road spray and debris while complementing the classic styling of early Porsche models. Whether you're carrying out a concours restoration or replacing worn service items, this OE Match blade offers the quality, durability and appearance expected from a premium restoration component.

What Does the Wiper Blade Do?

The front wiper blade plays a vital role in maintaining safe driving visibility by keeping the windscreen clear in poor weather conditions.

Its primary functions include:

• Removing rainwater from the windscreen.
• Clearing road spray, dust and debris.
• Providing a clear field of vision during adverse weather.
• Reducing streaking and smearing.
• Maintaining even contact across the glass.
• Supporting safe and confident driving.

A high-quality wiper blade ensures consistent wiping performance while protecting the windscreen from unnecessary wear.

Why Replace the Wiper Blade?

Wiper blades naturally deteriorate over time due to continual exposure to sunlight, moisture, dirt and changing temperatures.

Common causes of wear include:

• Hardened or cracked rubber.
• Split wiping edge.
• Corrosion of the metal frame.
• Loss of wiping pressure.
• Damage caused by prolonged storage.
• Dirt and grit embedded in the rubber.
• General age-related deterioration.

Replacing worn blades restores efficient wiping performance and helps prevent scratches caused by damaged rubber.

Symptoms of a Worn Wiper Blade

Common signs that replacement is required include:

• Smearing across the windscreen.
• Streaks remaining after wiping.
• Chattering or skipping during operation.
• Squeaking noises. Uneven wiping pattern.
• Torn or hardened rubber.
• Reduced visibility in wet weather.
• Corrosion or damage to the blade frame.

Replacing the blade at the first signs of wear helps maintain optimum visibility and driving safety.

Benefits

• Restores clear wet-weather visibility.
• Improves wiping efficiency.
• Reduces streaking and smearing.
• Protects the windscreen from scratches caused by worn blades.
• Maintains the authentic appearance of your Porsche.
• Durable construction for long service life.
• Direct replacement installation.

Installation Recommendations

For the best wiping performance, inspect the complete windscreen wiping system during installation, including:

• Wiper arms.
• Wiper arm springs.
• Wiper spindle assemblies.
• Wiper linkage.
• Wiper motor.
• Washer jets.
• Washer hoses and reservoir.

Maintaining the complete system helps ensure smooth, reliable operation and consistent visibility throughout the year.

Why Choose OE Match Wiper Components?

OE Match wiper components are manufactured to deliver factory-quality fitment, dependable performance and long-lasting durability for classic Porsche models. Produced using quality materials and precision engineering, this polished metal 13-inch wiper blade restores reliable wiping performance while preserving the original appearance of your vehicle. It is an ideal replacement for concours restorations, regular maintenance and enthusiast-owned vehicles where originality and quality matter.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1698400500

The product you are viewing cross references to these numbers