Door Panel

Complete SET OF 4 door pockets for Porsche 911 '69-'73, re manufactured to exact OEM specifications. The kit includes 2 map pockets (front) and 2 tilting pockets (rear), all beautifully engineered and finished to a very high quality. A must to finish your 100-point restoration.

Our ready-to-install door pockets are probably the best you can buy for originality and fit. The tool to mould and cast the door pockets was developed using 3-D scanning on NOS door pockets. The door pockets have a fiberglass rather than cardboard substructure, which guarantees durable structural integrity and water resistance. Grain and gloss of the vinyl surface coat have been optimised to match the typical patina found on the arm rest and door caps of '69-'74 models. The edges are finished with the original polished and anodised aluminum strips with the correct diamond shaped insert. The inside of the door pockets are lined with velvet flocking just like the original. The front pockets have the original rubber molded strip on top.

All reinforcements, slide bolts, fasteners and fittings are like the original. We guarantee a factory authentic appearance and fit.

The door pockets come with step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of a moderately experienced home mechanic.

Please NOTE:
It includes 2 elastic bands, 2 allen bolts (M6), 8 small conic bolts (M4), 2 nuts (M6), 8 rivets and 8 plastic hinges.

For Fitting Instructions CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155500011

The product you are viewing cross references to these numbers

Door pocket bins small part



Fits:
Porsche 911/912 1965-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155501

The product you are viewing cross references to these numbers

Door pocket bins

Fits:
Porsche 911/912 1965-73

Diagram ref no 27

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155503

The product you are viewing cross references to these numbers

Door Pocket Plastic Hinge 
Sold each - required per dood

Restore the functionality and appearance of your classic Porsche door pockets with this OE Match Door Pocket Plastic Hinge. This precision-manufactured replacement hinge provides smooth operation and secure support for the door pocket lid, helping to maintain the original practicality and presentation of your interior.

Fits:

• Porsche 911 1969-1973 2.2L / 2.4L / 2.7L RS LWB (F)  

The plastic hinge is one of the most commonly worn components within the classic Porsche door pocket assembly. Decades of regular use, exposure to heat and UV light, and the natural ageing of plastic often cause the original hinges to become brittle, crack or break completely. Damaged hinges can result in sagging door pockets, loose lids or complete failure of the pocket assembly.

Manufactured to OE Match standards, this replacement hinge offers accurate fitment and dependable durability, making it the ideal choice for interior restorations, refurbishment projects and routine maintenance.

Please Note: Four hinges are required per door for a complete installation.

What Does the Door Pocket Plastic Hinge Do?

The plastic hinge forms the pivot point for the door pocket lid, allowing it to open and close smoothly while securely supporting the pocket assembly.

Its primary functions include:

• Supporting the door pocket lid.
• Providing smooth opening and closing action.
• Maintaining correct alignment of the pocket.
• Preventing excessive movement or sagging.
• Preserving the original appearance and functionality of the door panel.

Although small, these hinges are essential to the proper operation of the door storage compartment.

Why Replace the Door Pocket Hinges?

Plastic interior components naturally deteriorate over time.

Common signs of failure include:

• Cracked or broken hinges. Brittle plastic caused by age.
• Door pocket lid no longer opening correctly.
• Sagging or loose pocket assembly.
• Missing hinge components.
• Damage during door card restoration.
• Wear from repeated use over many years.

Replacing all the hinges during refurbishment ensures smooth operation and restores the integrity of the complete door pocket assembly.

Features

• OE Match replacement door pocket plastic hinge.
• Manufactured for accurate fitment.
• Durable high-quality plastic construction.
• Restores smooth door pocket operation.
• Helps maintain correct door pocket alignment.
• Direct replacement for worn or broken original hinges.
• Ideal for interior restoration and refurbishment.
• Suitable for concours-quality restorations.
• Four hinges required per door.

Please verify compatibility with your vehicle's model year and original part number before ordering.

Why Choose OE Match Interior Restoration Parts?

OE Match interior components are designed for Porsche enthusiasts and professional restorers who demand authentic appearance, precise fitment and dependable quality. Every component is manufactured to provide factory-style functionality while preserving the originality of classic Porsche interiors. Whether restoring a concours-winning example or refreshing a well-used driver's car, OE Match products help recreate the quality and craftsmanship of the original interior.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155503721

The product you are viewing cross references to these numbers

Door Pocket Rubber Strap Holder.


Fits:
Porsche 911/912 1965-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155541900

The product you are viewing cross references to these numbers

Door Pocket Rubber Strap.

 


Fits:
Porsche 911/912 1965-73

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99991115850

The product you are viewing cross references to these numbers

Door pockets alloy trim set.



Fits:
Porsche 911 1968-73

These are reproduction trims to finish off door bins if your vinyl pockets are in good shape or if you are able to bring them back to life.

Each set contains 2 pieces for small and large bin.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155501

The product you are viewing cross references to these numbers

Door Pockets Hardware Kit.
The OE Match Door Pockets Hardware Kit is a premium-quality fastening kit designed to provide the correct hardware for securely installing or replacing door pockets on compatible classic Porsche models. Manufactured to OE specifications for fit, finish and durability, this comprehensive hardware kit contains the essential mounting components required to achieve secure installation while maintaining the authentic factory appearance of the interior.  

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Manufactured from high-quality automotive-grade steel with a corrosion-resistant finish, each fastener is engineered to withstand continual vibration, regular use and changing cabin temperatures. Designed to match the original Porsche hardware specifications, this kit provides direct OE-style fitment, making it ideal for interior restorations, refurbishment projects or replacing missing, worn or incorrect mounting hardware.

What This Product Does:

• Provides the correct hardware for mounting door pockets.
• Secures the door pockets firmly to the door panel.
• Helps maintain correct alignment of the interior trim.
• Replaces missing, damaged or corroded mounting hardware.
• Supports a secure, rattle-free installation.
• Preserves the original factory appearance.
• Restores factory interior assembly standards.
• Forms an essential part of professional interior restoration.

Symptoms Of Wear Or Failure:

• Loose or unstable door pockets.
• Rattling noises from the door trim.
• Missing or incorrect fasteners.
• Difficulty securing the door pocket correctly.
• Corroded or damaged mounting hardware.
• Door pockets pulling away from the door panel.
• Poor alignment of interior trim components.
• Visible wear or damage around mounting points.
• Incomplete or untidy interior appearance.
• Reduced originality during restoration.

Why Replacement Matters:

• Door pocket mounting hardware is subjected to continual vibration, repeated opening and closing of the doors and regular use throughout the vehicle's life. Over time, fasteners can become loose, corroded, damaged or lost during previous repairs, compromising the security and appearance of the door pockets.
• Loose or incorrectly mounted door pockets can create unwanted rattles, reduce storage functionality and detract from the quality of the vehicle's interior. Using the correct hardware also helps prevent damage to surrounding trim panels and ensures the door pockets remain securely positioned.
• Replacing worn or missing fasteners with the OE Match Door Pockets Hardware Kit restores secure installation and factory-correct interior assembly. Manufactured to OE standards using premium-quality materials with a corrosion-resistant finish, this kit provides factory-style fitment, long-lasting durability and the authentic finishing detail expected for classic Porsche restoration and refurbishment.

Fixing screw set for interior armrests. 
Set for both armrests

Fits:
Porsche 911 - 1969 to 1973

Set includes
Spring washer A6 - 90002700403
Cheese head screw M6 x 12 - 900112912901
Cheese head screw M6 x 10 N0147652

Diagram ref no 14 and 15



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N0147612

The product you are viewing cross references to these numbers

Frame set window switch set. 



Fits:
Porsche 911 / 912 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997
Porsche 914 - 1970 to 1976

Window Switch Frame Set

Upgrade the door cards of your air-cooled classic with our latest enhancement. OEM metal brackets can be fragile, often getting damaged during switch or upholstery replacements. Our Window Switch Frame Set offers a durable solution, precision-crafted using CNC machining to seamlessly replace the standard OEM frames.

Installation is straightforward and hassle-free, with all necessary tools and screws included in the package, saving you valuable time.

This set is compatible with a range of classic models, including the F/G-model, 912, 914, 964, and 993. 

It includes frames for both the driver and passenger sides.

Please note:
Switches are not included.

Guide for push button door lock release rod - for left or right hand side
Sold each - 2 required per car

Fits:

Porsche 911 - 1965 to 1968

Guide for push button on lock release rod

Diagram ref no 28

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155549120

The product you are viewing cross references to these numbers

Inner Door Handle.
The OE Match Inner Door Handle is a premium-quality replacement interior door release handle designed to restore smooth, reliable operation of the door latch mechanism on compatible classic Porsche models. Manufactured to OE specifications for fit, finish and durability, these handles provide factory-style functionality while maintaining the authentic appearance of the vehicle's interior.  

Fits:

• Porsche 911 1965-1968 2.0L / 912 SWB (F)
• Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)  

Diagram Ref No 9

Manufactured from high-quality die-cast metal with a durable corrosion-resistant finish, the inner door handles are engineered to withstand repeated daily use while maintaining smooth operation. Precision-manufactured for direct OE-style installation, they connect seamlessly to the original door latch mechanism, ensuring dependable door release and long-lasting performance. Ideal for restoration projects or replacing worn, broken or damaged original handles.  

What This Product Does:

• Operates the interior door latch mechanism.
• Allows the door to be opened safely from inside the vehicle.
• Provides smooth and reliable door release.
• Restores factory-style operation and appearance.
• Connects directly to the original door latch assembly.
• Replaces worn, damaged or broken interior handles.
• Improves convenience and passenger safety.
• Forms an essential part of the interior door hardware system.

Symptoms Of Wear Or Failure:

• Difficulty opening the door from inside.
• Loose or excessive movement in the handle.
• Broken or cracked handle body.
• Sticking or rough operation.
• Failure of the handle to release the door latch.
• Worn or damaged pivot mechanism.
• Corrosion or cosmetic deterioration.
• Rattling noises from the door handle assembly.
• Excessive wear from frequent use.
• Poor interior appearance during restoration.

Why Replacement Matters:

• The inner door handle is operated every time the vehicle is entered or exited, making it one of the most frequently used interior components. Over time, continual use, wear, corrosion and ageing can weaken the handle or its pivot mechanism, reducing its reliability and ease of operation.
• A worn or damaged door handle can make it difficult to exit the vehicle quickly and safely, while also placing additional strain on the door latch mechanism. Broken or loose handles can detract from the quality and originality of the interior, particularly on classic Porsche models.
• Replacing a worn or faulty inner door handle restores smooth, dependable door operation and enhances the appearance of the cabin. The OE Match replacement provides factory-style fitment, durable construction and long-lasting reliability, making it the ideal choice for Porsche restoration, repair and preventative maintenance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153107

The product you are viewing cross references to these numbers

Inner door handle.

Fits:
Porsche 911 1965-73

Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153107

The product you are viewing cross references to these numbers

Inner Door Pocket Support Bracket.

Fits:
Porsche 911 1969-73

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155508

The product you are viewing cross references to these numbers

Inner door push button guide sleeve.

Fits:
Porsche 911 1965 - 1976

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153148122

The product you are viewing cross references to these numbers

Inner door push button guide sleeve.

Fits:
Porsche 911 1965-76

Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90153148122

The product you are viewing cross references to these numbers