Roof storage box

ARKYN FALCON-1  Forged Carbon Fiber Roof Box

Carbon fiber construction lightweight, rigid, and distinctive.
Dimensions: 213 × 88 × 37 cm
Aerodynamic: minimal drag and wind noise 
Volume: 398 L

Made from 100% genuine carbon fiber, the FALCON-1 Roof box redefines performance storage. Lightweight, aerodynamic, and designed with precision – it adds both function and statement to your car.

Available Finishes:
• High Gloss Carbon – deep shine with a premium mirror-like effect.
• Matte Carbon – refined elegance with a stealth-inspired look.

What's inside:
•  Carbon Roof box
•  Strap-down belts - to secure your luggage safely inside the Roof box
•  Clamping system - to mount the roof box securely on your roof racks


Details under the surface

Inside the FALCON-1 - Every detail is engineered to protect what you carry. A scratch-resistant microfleece lines the entire interior, keeping your gear safe and silent even on long drives. All mounting points are covered with precision-fit panels, hiding every bolt and screw for a clean, seamless look. No rattles. No exposed hardware. Just a refined interior built to match the performance on the outside.

Forged Carbon High Gloss - Raw power, refined to perfection. Our high gloss forged carbon explodes with depth and character, turning every angle into a statement of precision and performance

Forged Carbon Matte - A stealth aesthetic born from controlled chaos. Our forged matte carbon blends aggressive texture with a low-reflection finish for a bold, understated performance look.

Not sure if it fits your car?

Our standard FALCON-1 mounting system is built to fit any commercially approved roof rack — no exceptions, no special adapters, no hidden fine print. If your vehicle has certified roof rails or crossbars, the box locks right in.

But what if your car doesn’t support roof racks at all?

That’s exactly why we developed our Motorsport mount. It uses certified high-load suction cups, the same technology trusted in professional automotive and film industries, giving you a secure, track-tested solution that works on almost any vehicle, even those with no official mounting points.

In short: whether your car welcomes traditional roof racks or absolutely refuses them, there’s a mounting solution that fits—and holds.

Vehicles currently not compatible

Our suction-cup mounting system is engineered exclusively for standard automotive tempered glass. It must not be used on thin lightweight glass, reduced-thickness glazing, motorsport-grade lightweight rear windows, or polycarbonate/acrylic panels. These materials cannot withstand the vacuum pressure and localized load created by suction cups—using the system on such surfaces may lead to damage or cracking.

For this reason, all Porsche GT models are currently excluded from compatibility. Their ultra-thin rear glass offers no structural margin for certified suction mounting, and the Motorsport Mount also requires a fully accessible rear window without add-ons or aerodynamic attachments.

We are actively developing alternative solutions, but for now, Porsche GT models remain outside the safe operating limits of our system.

Does the carbon fiber construction actually improve vehicle handling?

Absolutely. Unlike conventional plastic boxes that flex and create a shifting center of gravity, the structural rigidity of the FALCON-1 minimizes vibrations. Its lightweight carbon shell reduces the impact on your vehicle’s handling, ensuring that performance remains a priority, even when fully loaded.

What is the recommended maximum speed with the ARKYN carbon roof box?

While the FALCON-1 is engineered for high-speed stability and aerodynamic integrity, your maximum speed is governed by your vehicle manufacturer's roof load specifications and the rating of your roof rack system. However, its aerodynamic profile is designed to remain silent and stable well beyond the limits of standard boxes.

Is the FALCON-1 compatible with sports cars that lack roof rails?

Yes. For performance cars without traditional mounting points, we developed the ARKYN Motorsport Mount. This vacuum-sealed system from SeaSucker allows for a secure, low-profile installation on vehicles like the Porsche 911 or Tesla Model S, preserving the car’s silhouette.

What is the difference between Regular Carbon and Forged Carbon finishes?

It is a matter of aesthetic DNA. Regular Carbon features the iconic 3K Twill weave. Symmetrical and technical. Forged Carbon offers a marbled, organic look pioneered by hypercar manufacturers. Both offer identical structural performance and UV protection.

Is the box waterproof for winter sports?

Yes. The FALCON-1 features a precision-engineered overlapping shell design and high-quality seals to ensure your gear stays dry, whether you're driving through alpine snowstorms or coastal rain.

How much weight can I load into the roof box?

We recommend a maximum load of 50 kg for using the box with roof racks, depending on your vehicle’s roof load limit. Always check your manufacturer’s specifications before mounting, especially if you are using the Motorsport mount.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FLC-1

The product you are viewing cross references to these numbers

ARKYN FALCON-1 Weaved Carbon Fiber Roof Box

Carbon fiber construction lightweight, rigid, and distinctive.
Dimensions: 213 × 88 × 37 cm
Aerodynamic: minimal drag and wind noise 
Volume: 398 L

Made from 100% genuine carbon fiber, the FALCON-1 Roof box redefines performance storage. Lightweight, aerodynamic, and designed with precision – it adds both function and statement to your car.

Available Finishes:
• High Gloss Carbon – deep shine with a premium mirror-like effect.
• Matte Carbon – refined elegance with a stealth-inspired look.

What's inside:
•  Carbon Roof box
•  Strap-down belts - to secure your luggage safely inside the Roof box
•  Clamping system - to mount the roof box securely on your roof racks


Details under the surface

Inside the FALCON-1 - Every detail is engineered to protect what you carry. A scratch-resistant microfleece lines the entire interior, keeping your gear safe and silent even on long drives. All mounting points are covered with precision-fit panels, hiding every bolt and screw for a clean, seamless look. No rattles. No exposed hardware. Just a refined interior built to match the performance on the outside.

Weaved Carbon High Gloss - Our high gloss weaved carbon delivers a deep, mirror-like finish with maximum strength, crafted to elevate every mile and every moment.

Weaved Carbon Matte - Our matte carbon finish absorbs light, sharpens every contour, and delivers a stealth look engineered for performance without compromise.

Not sure if it fits your car?

Our standard FALCON-1 mounting system is built to fit any commercially approved roof rack — no exceptions, no special adapters, no hidden fine print. If your vehicle has certified roof rails or crossbars, the box locks right in.

But what if your car doesn’t support roof racks at all?

That’s exactly why we developed our Motorsport mount. It uses certified high-load suction cups, the same technology trusted in professional automotive and film industries, giving you a secure, track-tested solution that works on almost any vehicle, even those with no official mounting points.

In short: whether your car welcomes traditional roof racks or absolutely refuses them, there’s a mounting solution that fits—and holds.

Vehicles currently not compatible

Our suction-cup mounting system is engineered exclusively for standard automotive tempered glass. It must not be used on thin lightweight glass, reduced-thickness glazing, motorsport-grade lightweight rear windows, or polycarbonate/acrylic panels. These materials cannot withstand the vacuum pressure and localized load created by suction cups—using the system on such surfaces may lead to damage or cracking.

For this reason, all Porsche GT models are currently excluded from compatibility. Their ultra-thin rear glass offers no structural margin for certified suction mounting, and the Motorsport Mount also requires a fully accessible rear window without add-ons or aerodynamic attachments.

We are actively developing alternative solutions, but for now, Porsche GT models remain outside the safe operating limits of our system.

Does the carbon fiber construction actually improve vehicle handling?

Absolutely. Unlike conventional plastic boxes that flex and create a shifting center of gravity, the structural rigidity of the FALCON-1 minimizes vibrations. Its lightweight carbon shell reduces the impact on your vehicle’s handling, ensuring that performance remains a priority, even when fully loaded.

What is the recommended maximum speed with the ARKYN carbon roof box?

While the FALCON-1 is engineered for high-speed stability and aerodynamic integrity, your maximum speed is governed by your vehicle manufacturer's roof load specifications and the rating of your roof rack system. However, its aerodynamic profile is designed to remain silent and stable well beyond the limits of standard boxes.

Is the FALCON-1 compatible with sports cars that lack roof rails?

Yes. For performance cars without traditional mounting points, we developed the ARKYN Motorsport Mount. This vacuum-sealed system from SeaSucker allows for a secure, low-profile installation on vehicles like the Porsche 911 or Tesla Model S, preserving the car’s silhouette.

What is the difference between Regular Carbon and Forged Carbon finishes?

It is a matter of aesthetic DNA. Regular Carbon features the iconic 3K Twill weave. Symmetrical and technical. Forged Carbon offers a marbled, organic look pioneered by hypercar manufacturers. Both offer identical structural performance and UV protection.

Is the box waterproof for winter sports?

Yes. The FALCON-1 features a precision-engineered overlapping shell design and high-quality seals to ensure your gear stays dry, whether you're driving through alpine snowstorms or coastal rain.

How much weight can I load into the roof box?

We recommend a maximum load of 50 kg for using the box with roof racks, depending on your vehicle’s roof load limit. Always check your manufacturer’s specifications before mounting, especially if you are using the Motorsport mount.

Please note: This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defective. Delivery time is normally 6 - 8 weeks.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FLC-1

The product you are viewing cross references to these numbers

ARKYN Motorsport mount

The Motorsport mount allows you to install your ARKYN Roof box directly onto your Sports car – using professional-grade suction mounts by SeaSucker®. No roof rails. No compromises.

Each mount is engineered to handle high speeds, aerodynamic forces, and the demands of track-inspired vehicles. With its modular design, the Motorsport mount keeps your setup clean, low, and secure – without sacrificing the lines of your car.

Perfect for Sports cars and all vehicles where standard roof racks aren’t an option.

Included: 8x SeaSucker ® vacuum mount (set)
Compatibility: FALCON-1 Carbon Roof box
Finish: Shadow Black or Racing Red
Installation: Quick setup, no permanent  fixtures


Not sure if it fits your car?

Our standard FALCON-1 mounting system is built to fit any commercially approved roof rack — no exceptions, no special adapters, no hidden fine print. If your vehicle has certified roof rails or crossbars, the box locks right in.

But what if your car doesn’t support roof racks at all?

That’s exactly why we developed our Motorsport mount. It uses certified high-load suction cups, the same technology trusted in professional automotive and film industries, giving you a secure, track-tested solution that works on almost any vehicle, even those with no official mounting points. In short: whether your car welcomes traditional roof racks or absolutely refuses them, there’s a mounting solution that fits—and holds.

Vehicles currently not compatible

Our suction-cup mounting system is engineered exclusively for standard automotive tempered glass. It must not be used on thin lightweight glass, reduced-thickness glazing, motorsport-grade lightweight rear windows, or polycarbonate/acrylic panels. These materials cannot withstand the vacuum pressure and localized load created by suction cups—using the system on such surfaces may lead to damage or cracking.

For this reason, all Porsche GT models are currently excluded from compatibility. Their ultra-thin rear glass offers no structural margin for certified suction mounting, and the Motorsport Mount also requires a fully accessible rear window without add-ons or aerodynamic attachments.

We are actively developing alternative solutions, but for now, Porsche GT models remain outside the safe operating limits of our system.

Please note: This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defective. Delivery time is normally 6 - 8 weeks.

ARKYN Roof box Pull strap

The ARKYN Roof box Pull strap is designed to make closing and handling your Roof box effortless. Built from high-strength webbing with an ergonomic grip element, it ensures comfort and control every time you use it.

Key Features:
 •  Durable construction – heavy-duty strap with reinforced stitching
 •  Ergonomic grip – specially designed end piece for secure handling
 •  Integrated carabiner hook – quick and reliable attachment
 •  Optimized length (395 mm) – perfect balance of reach and control
 •  Lightweight design – adds convenience without bulk.

A subtle yet essential accessory – engineered for everyday usability and a premium ARKYN experience.

Please note: This item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defective. Delivery time is normally 6 - 8 weeks.

Porsche Bag organiser for roof tent



On a road trip with your own Porsche, one thing counts above all: Driving So that you get valuable time out of the day right at the start, everything has its fixed place in the bag organiser made of hard-wearing polyester. The well-thought-out layout makes it easy to organise toiletries and the many little helpers for everyday travel so that they are quickly at hand. The bag organiser itself can simply be hung next to the ladder on the extension floor of the Porsche roof tent. The high-quality look is topped off by the "PORSCHE" logo and a printed mountain silhouette. Particularly practical: As soon as you are ready for the next corner chase, the bag organiser is easy to fold up and stow away.

Details:
- Dimensions: 77 cm x 58 cm (length x width)
- Material: Polyester
- Colour: Dark grey

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204401311

The product you are viewing cross references to these numbers

Porsche Inner tent for roof tent



Whether it is coarse scree from a challenging summit assault in the tread sole of robust hiking boots or fine sand from relaxed beach walks under light summer shoes: Some memories of unforgettable days in the midst of unique nature are much better stored in your dreams than in the Porsche roof tent. That is why the shoe organiser made of hard-wearing polyester can store up to 10 pairs of shoes cleanly and dryly. When the shoe organiser is hung neatly on the hooks provided on the roof tent, the "PORSCHE" logo and the printed mountain silhouette are shown off to particularly good effect. Storage during the journey is also well thought out, for which the shoe organiser can simply be folded up.

Details:
- Dimensions, packed: 75 cm x 25 cm x 25 cm (length x width x height)
- Material: breathable poly-cotton material
- Colour: Light grey

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204401310

The product you are viewing cross references to these numbers

Porsche Performance roof box, Black.



Fits:
Porsche 991 / 992 Coupe models 2012>>
* with Sunroof (option code 3FD)
* with Glass sunroof (option code 3FE)

Porsche Taycan / Sport Turismo / Cross Turismo 2020>>
* Option code: 3S1 Bright roof rails
* Option code: 3S2 Black roof rails without drip mouldings
* Option code: 3S4 Preparation for roof rack, black

The innovative Porsche Performance roof box was developed at the Weissach Development Centre specially for Porsche vehicles. It has undergone extensive tests in a high-tech wind tunnel. The result? An aerodynamic design und first-class drag coefficient.

The Performance roof box therefore combines sportiness with individual design and functionality: in black high-gloss with silver "PORSCHE" logo on the rear, the aerodynamic plastic box fully lives up to the exclusive style of your Porsche. As a special highlight, the blades on the side painted in Black (high-gloss) are replaceable and available both in select exterior colours and as a custom-painted version. This way, it's easy to adapt the Porsche Perfomance roof box to suit your vehicle. With a capacity of 480 litres and a possible payload of up to 75 kg, it offers additional storage space for your next adventure. Thanks to the practical quick-mount PowerClick system, fitting the roof box is fast and uncomplicated. And with the supplied fastening straps and two-sided opening, loading is extremely convenient as well.

Details:

- Roof box in Black (high-gloss),
- "PORSCHE" logo on the rear in Silver,
- Replaceable side blades in Black (high-gloss),
- Dimensions: 211.4 × 90.8 × 43.4 cm,
- Max. payload: 75 kg,
- Capacity: 480 litres,
- Opens on both sides,
- Includes 3 fastening straps,
- Comes with protective cover with "PORSCHE" logo

Replaceable side blades available in (can be bought separate):
- Primed, Can be painted in exterior colour
- Painted in Carrara White Metallic,
- Painted in Volcano Grey Metallic,
- Painted in Dolomite Silver Metallic,

Please note: Only in conjunction with roof transport system. Due to the aerodynamic sensitivity of the 911 models, a maximum speed of 130 km/h is recommended in conjunction with a loaded roof transport system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y0044870

The product you are viewing cross references to these numbers

Porsche Roof Tent 
for Porsche 991 / 992 / Macan / Panamera / Cayenne / Taycan
* use only in conjunction with: Roof carrier



Dimensions and weights
- Dimensions (folded): 146 x 140 x 33 cm (length x width x height)
- Dimensions (Unfolded): 258 x 257 x 118 cm (length x width x height)
- Overhead area: 210 x 130 cm<
- Weight: approx. 56 kg
- Maximum payload when stationary (persons and luggage): approx. 190 kilograms (vehicles with roof rails) or approx. 140 kilograms (vehicles without roof rails)
- Maximum speed with roof tent mounted: 130 km/h

Passionate Porsche enthusiasts can now spend the night in close proximity to their sports car. Better yet by ending a day of adventure in the Porsche roof tent – preferably surrounded by nature. This is because the elevated lying position offers a wonderful view of forest and meadows, mountains and lakes. Those who want to can also look up through the skylight and go on an adventurous discovery of the night sky. In addition to the Skyview skylight, the roof tent has 2 side windows. These can be opened completely for ventilation and closed at night with an insect screen and additional blackout screen. While driving, the 2-person tent is safely stowed in an aerodynamically shaped hard shell case.

The hard shell case, designed in the Weissach development centre, is available in a choice of black/light grey or black/dark grey. It was designed by Studio F.A. Porsche in Zell am See and features the distinctive matt black "PORSCHE" lettering on both sides. This all season tent features a breathable cotton blend fabric, waterproof zippers and an additional rain cover for the access hatch. The side walls are a special eye-catching feature. They quote the legendary flyline of the 911 and are also printed with "PORSCHE" lettering. Yet the interior also has some highlights to offer, for example the well insulated, light grey quilted lining, which is printed with a mountain silhouette at the head end. The quilted pattern resonates on the integrated, comfortable high-density polyfoam mattress.
Prior to travelling, the Porsche roof tent is attached to the base carrier roof transport system and can be further secured with the anti-theft system. At your chosen spot, it can be set up in no time at all. After opening the two lockable safety tabs, the hard shell case is lifted a little and then unfolded, thanks to support from two gas pressure shock absorbers. The underbody foot section can then be unfolded and stabilised using the integrated telescopic ladders. Afterwards, the already unfolded tent only needs to be shaped and tensioned with 4 spring rods.

Other Accessories
Additional Tequipment accessories are available for the roof tent in the future, including an inner tent for better thermal insulation, a thermal blanket for cool nights as well as practical shoe and bag organisers.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992044895

The product you are viewing cross references to these numbers

Porsche Shoe organiser for roof tent



Whether it is coarse scree from a challenging summit assault in the tread sole of robust hiking boots or fine sand from relaxed beach walks under light summer shoes: Some memories of unforgettable days in the midst of unique nature are much better stored in your dreams than in the Porsche roof tent. That is why the shoe organiser made of hard-wearing polyester can store up to 10 pairs of shoes cleanly and dryly. When the shoe organiser is hung neatly on the hooks provided on the roof tent, the "PORSCHE" logo and the printed mountain silhouette are shown off to particularly good effect. Storage during the journey is also well thought out, for which the shoe organiser can simply be folded up.

Details:
- Dimensions: 77 cm x 58 cm (length x width)
- Material: Polyester
- Colour: Dark grey

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99204401312

The product you are viewing cross references to these numbers

Recovery boards. 
The robust plastic boards help to free the vehicle on soft ground.



Recovery boards are an indispensable off-road tool for freeing vehicles that are stuck in fine sand, on wet fields or in deep mud, even without external help. Both boards are pushed as horizontally and as far as possible under the previously freed drive wheels. As soon as the tyres have sufficient grip, the journey can continue. The plastic boards also offer their advantages on icy or snow-slick roads.

The 3.4 kg grey recovery boards with "PORSCHE" logo are extra thick, retain their shape and feature nubs on the top. Tyres grip them perfectly. The plastic used is extremely hard-wearing, UV-resistant and easy to clean. Molded handles on both sides make professional use easier.

Both recovery boards are transported directly above one another in the roof cage and can be quickly secured with four pivoting fastening pins and secured with a padlock against theft.

Details:
- 2 recovery boards
- Material: Plastic
- Colour: grey
- Dimensions: 650 mm x 330 mm x 70 mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9920440128

The product you are viewing cross references to these numbers