H&R
The year was 1980 – vehicle lowering was still completely unknown and a litre of gas cost only 1.15 DM.
H&R company founders Werner Heine and Heinrich Remmen had a great vision: performance enhancement by lowering road cars with homologation. A sensation for that time and a forerunner of today’s lowering with part approval.
The courageous young entrepreneurs soon realized that they had hit the mark with their project. Thanks to their ground-breaking idea, the company grew steadily into a well-established family business. Today, suspension components “Made by H&R” are deeply appreciated by Porsche customers all over the world.
Not for cars with PDDC (Porsche Dynamic Chassis Control)
Fits
Porsche 991 Carrera 4
Porsche 991 Carrera 4S
Coupe, Cabriolet and Targa models
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
23009-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Including cars with Front Axle Lift
Fits
Porsche 992 Carrera 2
Porsche 992 Carrera 2S
Porsche 992 Carrera 4
Porsche 992 Carrera 4S
2wd and 4wd Coupe, Cabriolet and Targa
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 30mm to 40mm
Approx. Rear Lowering - 25mm to 35mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
23020-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
Not for cars with PDDC (Porsche Dynamic Chassis Control)
Fits
Porsche 991 Carrera 2
Porsche 991 Carrera 2S
Coupe, Cabriolet and Targa models
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
23009-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
For cars with and without PASM
Fits
Porsche 981 Boxster / Cayman
Porsche 981 Boxster S / Cayman S
Porsche 982 (718) Boxster / Cayman
Porsche 982 (718) Boxster S / Cayman S
Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)
Approx. Front Lowering - 10mm to 25mm
Approx. Rear Lowering - 20mm
These are the perfect answer for cars equipped with electronic shock absorbers.
Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.
H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.
Only the front springs are adjustable on this kit
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
23006-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
Fits
Porsche Macan (95B, 95BN) 04/2014>> with PASM
WITHOUT Air Suspension
Height Adjustable Springs
for original shock absorbers with electronic damping (PASM)
Macan, S, turbo
Approx. Front Lowering - 40mm to 60mm
Approx. Rear Lowering - 30mm to 50mm
Macan, GTS
Approx. Front Lowering - 30mm to 50mm
Approx. Rear Lowering - 15mm to 35mm
H&R height adjustable spring systems combine standard shock absorbers with variable lowering. The electronic adjustment of adaptive shock absorbers
remains unrestricted and allows a choice between a comfortable or sporty suspension setup.
• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
23001-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan GTS Petrol 3.0L V6 360Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan GTS Petrol 2.9L V6 380Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
Lowers car by: 20mm
Fits:
Porsche 911 (992) Turbo + Turbo S Coupé + Cabrio/ Convert. 2020>>
for vehicles with PASM suspension
for vehicles with sports suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28628-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
Lowers car by: FRONT 30mm / REAR 30mm
Fits:
Porsche 971 Panamera Sport Turismo 4 / 4S, 4WD 2017>>
only with PASM sports suspension,
The Porsche Panamera Sport Turismo is the top class in terms of station wagons. And despite its inherently rock-solid sportiness you can go one step further when it comes to dynamics. Our sport spring kit, which lowers the centre of gravity by 30 millimetres on both axles.
excl. air suspension
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28648-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Panamera 4 3.0L Turbocharged V6 Sport Turismo
- Porsche Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo
Lowers car by: 1.5-2.0 inches on average
Fits:
Porsche 992 (911) Carrera 2S Cabrio / Coupe 2020>>
Porsche 992 (911) Carrera 4S Cabrio / Coupe 2020>>
* Incl. PASM
* Incl. Front End Lift
Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.
H&R Sport Springs offer the handling characteristics and aggressive appearance that you've been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28652-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
Fits:
Porsche 981 Boxster / Boxster S , 2WD, 2012>> not for cars with PASM
Porsche 981 Cayman / Cayman S , 2WD, 2012>> not for cars with PASM
Lowers car by: FT 30-50mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28743-1
您正在查看的产品与这些编号存在交叉引用关系
- 我们目前无法提供该产品的配件细节。请联系我们获取更多信息。
Fits:
Porsche 986 Boxster / Boxster S, 2WD, 10/1996>> with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSS-37-511-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 944 / 924 / 968
incl. Cabrio,
with approval,
only for FA-inner lower strut mounting bracket opening = 20 mm inside!
only for cars with aluminum rear axle Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSS-37-827-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 944 incl. S / 924S / 968
incl. Cabrio,
with approval,
only for strut base FA-inner lower strut mounting bracket opening = 18 mm inside! (see picture)
only for cars with aluminum rear trailing arm Clubsport
Lowers car by: FT 230-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSS-37-827-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits:
Porsche 911 (996) Turbo, 4WD, with approval Clubsport
Lowers car by: FT 20-50mm / RR 20-40mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSS-37-462-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 TURBO 2000-05
Fits:
Porsche 911 (996) C4, 4WD, Carrera 4/4S with approval Clubsport
Lowers car by: FT 20-50mm / RR 20-40mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSS-37-462-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
Fits:
Porsche 911 (996) C2, 2WD, Carrera 2 incl. Cabrio/Targa, with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSS-37-510-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
Fits:
Porsche 911 (993), 2WD, Carrera 2/2S, Carrera 4/4S, Cabrio/Targa, 911 Turbo, with approval Clubsport
Lowers car by: FT 30-60mm / RR 30-50mm
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSS-37-954-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
Front & Rear Anti Roll Bar:
- Front - 26mm (not adjustable)
- Rear - 22mm (adjustable in 2 places)
Fits:
Porsche 987 Boxster Spyder 2009>>
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33180-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
Lowers car by: FRONT 30mm
Single spring supplied.
Please order a quantity of 2 for the front axle.
Fits:
Porsche 968 1992-95
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
29875VA
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
For cars with air suspension (ETS)
Fits:
Lowers car by: 30mm
Porsche 9YA Cayenne 2018>>
Only for cars with air-suspension (ETS)
Lowers car by: 40mm
Porsche 971 Panamera 2017>>
Only for cars with air-suspension (ETS)
NOTE: Please state chassis-number by ordering.
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28952-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Cayenne V6 3.0L Petrol 340Hp
- Porsche Cayenne Coupe V6 3.0L Petrol 340Hp
- Porsche Cayenne E-Hybrid V6 3.0L V6 340Hp
- Porsche Cayenne Coupe E-Hybrid V6 3.0L 340Hp
- Porsche Cayenne S V6 2.9L Petrol 440Hp
- Porsche Cayenne Coupe S V6 2.9L Petrol 440Hp
- Porsche Cayenne Turbo V8 4.0L Petrol 550Hp
- Porsche Cayenne Coupe Turbo V8 4.0L Petrol 550Hp
- Porsche Cayenne Turbo S E-Hybrid V8 4.0L 550Hp
- Porsche Cayenne Coupe Turbo S E-Hybrid V8 4.0L 550Hp
- Porsche Panamera V6 3.0L 2WD (330 Hp)
- Porsche Panamera 4 V6 3.0L 4WD (330 Hp)
- Porsche Panamera 4 V6 3.0L 4WD Executive
- Porsche Panamera 4 3.0L Turbocharged V6 Sport Turismo
- Porsche Panamera 4S V6 3.0L 4WD (440 Hp)
- Porsche Panamera 4S V6 3.0L 4WD Executive
- Porsche Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera 4S Diesel V8 4.0L 4WD (422 Hp)
- Porsche Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD
- Porsche Panamera 4 E-Hybrid V6 2.9L 4WD Executive
- Porsche Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo
- Porsche Panamera Turbo V8 4.0L 4WD (550 Hp)
- Porsche Panamera Turbo V8 4.0L 4WD Executive
- Porsche Panamera Turbo 4.0L Twin-Turbo V8 Sport Turismo
- Porsche Panamera Turbo S E-Hybrid V8 4.0L 4WD
- Porsche Panamera Turbo S E-Hybrid V8 4.0L 4WD Executive
Lowers car by: FRONT 35mm / REAR30 mm
Fits:
Porsche 9YA Cayenne / Cayenne S 2017>>
For cars incl. PASM, without air suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28690-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Cayenne V6 3.0L Petrol 340Hp
- Porsche Cayenne Coupe V6 3.0L Petrol 340Hp
- Porsche Cayenne S V6 2.9L Petrol 440Hp
- Porsche Cayenne Coupe S V6 2.9L Petrol 440Hp
Lowers car by: 20mm
Fits:
Porsche 987 Boxster Spyder 2009>>
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28905-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
Please note:
Vehicles fitted with load dependent brake control require separate approval despite of ABE (In countries where approval or the like is required). In any case set brake control to required level after lowering!
Lowers car by: 30mm
Fits:
Porsche 993 C2 / C2S 10/1993-1998
Porsche 993 C4 / C4S 10/1993-1998
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
60953-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Code: 29013-1
Front Lowering: 35mm
Rear Lowering: 35mm
Fits:
VOLKSWAGEN SCIROCCO III TYPE 13, UP TO 1020KG FA LOAD, INCL. DCC, WITH ABE* (FROM AUG 2008 ONWARDS)
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
29013-1
您正在查看的产品与这些编号存在交叉引用关系
- 我们目前无法提供该产品的配件细节。请联系我们获取更多信息。
Fits:
Porsche 997 GT3 / GT3 RS 03/2006>>>
Lowers car by: FT 10-30mm / RR 10-30mm
HA: incl. damping force adjustment,
RA: aluminum shocks with support bearings
Decades of suspension experience are realized here: Development and production of high tension springs and shock absorbers is done at H&R.
All parts are produced after OE standards. High quality monotube-shock absorber technique is combined with individually tuned springs and delivers a convincing lowering, a good driving experience without loosing the necessary comfort.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
32997-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable) requires bushes 99134379208
- Rear - 24mm (adjustable in 2 places)
Fits:
Porsche 981 Boxster / Boxster S 05/2012>>
Porsche 981 Cayman / Cayman S 05/2012>>
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33879-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 991 Carrera 2 / Carrera 2S 2012>
Typ 991, 2WD, incl. Convertible
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33880-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
Front & Rear Anti Roll Bar:
- Front - 26mm (adjustable in 3 places)
- Rear - 24mm (adjustable in 4 places)
Please note: if bushes are not included with the kit this means you have to reuse your existing ones.
Fits:
Porsche 997, 4WD, Carrera 4 / Carrera 4S 11/2005>> Manual & Tiptonic
Porsche 997, 4WD, Carrera 4 / Carrera 4S 11/2008>>Facelift Mod.
ONLY PDK gearbox,
Porsche 997 Turbo 11/2005>>
ONLY PDK gearbox
without TÜV approval
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability.
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33239-5
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII Turbo 2009>>
Front & Rear Anti Roll Bar:
- Front - 24mm (not adjustable)
- Rear - 24mm (adjustable in 4 places)
Please note: if bushes are not included with the kit this means you have to reuse your existing ones.
Fits:
Porsche 997 Carrera 2 / Carrera 2S 08/2004>>
Porsche 997 Carrera 2 / Carrera 2S Gen 2 but ONLY for PDK gearbox
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability.
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33239-4
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
#小时#
适用于配备空气悬架 (ETS) 的汽车
降低汽车高度: 35mm
适合:
保时捷 Macan Typ 95B 2014>>
仅适用于配备空气悬架 (ETS) 的汽车
注意:请在订购时注明底盘号。
保时捷 Carrera GT、996 GT II 和 GT III 等超高性能汽车都配备了 H&R 弹簧,而梅赛德斯·奔驰则为其超级跑车 CLK DTM AMG 选择了 H&R 弹簧,该超级跑车直接源自 DTM CLK。高强度钢的使用以及根据 DIN EN ISO 9001 要求的完整认证可在最高质量的情况下实现巨大的灵活性。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28804-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan Petrol 2.0L V4 237Bhp
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
Lowers car by: 40mm
Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only without PASM, only for cars with steel suspension
Porsche Macan / Macan S / Macan Turbo 2019>>
only without PASM
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28788-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
- Porsche Macan Petrol 2.0L 245Bhp
- Porsche Macan S Petrol 3.0L V6 354Bhp
- Porsche Macan Turbo 2.9L V6 440Bhp
- Porsche Macan Petrol 2.0L 265Bhp
- Porsche Macan T Petrol 2.0L 265Bhp
- Porsche Macan S Petrol 2.9L V6 380Bhp
Lowers car by: 40mm
Fits:
Porsche Macan S / Macan S Diesel / Macan Turbo 2014>>
Typ 95B, only with PASM, only for cars with steel suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28788-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Macan S Petrol 3.0L V6 340Bhp
- Porsche Macan S Diesel 3.0L V6 258Bhp
- Porsche Macan Turbo 3.6L V6 400Bhp
Lowers car by: 30-35mm
Fits:
Porsche 911 (991) 4WD Turbo / Turbo S 2013>>
Coupe & Convertible, type 991, including cars with PASM.
Porsche 911 (991) 4WD Turbo / Turbo S 2016>>
Coupe & Convertible, type 991, including cars with PASM and Lift System.
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28880-3
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Front & Rear Anti Roll Bar:
- Front - 28mm (not adjustable)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 991 Carrera 4 / Carrera 4S 2012>
Typ 991, 4WD, incl. Convertible
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33880-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
Fits:
Lowers car by: 25mm
Porsche 981 Boxster / Boxster S 05/2012>> for cars with PASM and without PASM, without sport suspension
Lowers car by: 30mm
Porsche 982 (718) Boxster / Boxster S 2016>> also for cars with PASM and without PASM, without sport suspension
Lowers car by: 35mm
Porsche 981 Cayman / Cayman S 05/2012>> also for cars with PASM and without PASM, without sport suspension
Lowers car by: 30mm
Porsche 982 (718) Cayman / Cayman S 2016>> also for cars with PASM and without PASM, without sport suspension
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28865-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
Fits:
Lowers car by: 25mm
Porsche 991 4WD Carrera + Carrera S
Coupe & Convertible, type 991, including cars with PASM
Lowers car by: 20-25mm
Porsche 911 (991) GTS 2014>>
Typ 991, 2WD, GTS Convertible,
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28880-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
Lowers car by: 30mm
Fits:
Porsche 991 2WD Carrera + Carrera S
Coupe & Convertible, type 991, including cars with PASM and without PASM
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
28880-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
Front & Rear Anti Roll Bar:
- Front - 24mm (adjustable in 2 places)
- Rear - 26mm (adjustable in 2 places)
Fits:
Porsche 965 Turbo 2WD 1991>> not for Tiptronic
Porsche 964 Carrera 2, 2WD 1989>> not for Tiptronic CAR FACTORY BUILT WIDE BODY (1775mm)
Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Fits:
Porsche 955 Cayenne / 955 Cayenne S 2003>>
Porsche 957 Cayenne / 957 Cayenne S / 957 Cayenne Diesel 2007>>
Please Note: Only for cars WITHOUT air-suspension.
Lowers car by: FT 70-80mm / RR 70-80mm
H&R Cup Kits consist of specially made springs and shocks-designed and engineered together-they provide optimal suspension damping and better control. H&R Cup Kits make a cohesive suspension package that outperforms and is more comfortable than separate off-the-shelf performance suspension components.
Designed and produced in H&R's ISO certified manufacturing facility in Germany, H&R Cup Kits are 100% German-made.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
31056-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Cayenne 3.2L V6 2003>>
- Porsche Cayenne S 4.5L V8 2003>>
- Porsche Cayenne 3.0L Diesel 2007>>
- Porsche Cayenne 3.6L 2007>>
- Porsche Cayenne S/GTS 4.8L 2007>>
Fits:
Porsche 996 C2 2WD Targa/Cabrio 1997>>
Please Note: Not for cars with Bilstein OEM sport suspension.
Lowers car by: FT 30mm / RR 30mm
H&R Cup Kits consist of specially made springs and shocks-designed and engineered together-they provide optimal suspension damping and better control. H&R Cup Kits make a cohesive suspension package that outperforms and is more comfortable than separate off-the-shelf performance suspension components.
Designed and produced in H&R's ISO certified manufacturing facility in Germany, H&R Cup Kits are 100% German-made.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
40513-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
Fits:
Porsche 996 C2 2WD Coupe 1997>>
Lowers car by: FT 30mm / RR 30mm
H&R Cup Kits consist of specially made springs and shocks-designed and engineered together-they provide optimal suspension damping and better control. H&R Cup Kits make a cohesive suspension package that outperforms and is more comfortable than separate off-the-shelf performance suspension components.
Designed and produced in H&R's ISO certified manufacturing facility in Germany, H&R Cup Kits are 100% German-made.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
40513-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005