发动机正时套件。保时捷 996 Turbo / 996 GT2 / 997.1 Turbo / 997.1 GT2 3.6ltr - 8230
代码: 8230
发动机正时套件 - 适用于保时捷996 Turbo / 996 GT2 / 997.1 Turbo / 997.1 GT2 3.6ltr
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
8230
您正在查看的产品与这些编号存在交叉引用关系
该 8230 正时工具套件旨在将配备 4 凸轮 3.6L 发动机的保时捷 911 GT2 和 911 Turbo 上的所有 4 个凸轮轴锁定在其定时位置。允许更换两个凸轮链，同时保持发动机正时。
该套件还包括 2 个凸轮链预紧器
附加信息
• 应用包括：保时捷996 Turbo / GT2 和997.1 Turbo / GT2 (2001 - 2010)。
• 发动机代码应用包括：M97/70S、M97/70、M96/70SL 和M96/70E。
• 相当于OEM 9661、9661/1 和9401。
• 与适当的 DTi（千分表指示器）和支架一起使用，以准确设置凸轮轴位置 - 请参阅激光零件号 7687。
• 设计按照 OEM 说明使用
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
8230
8230
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 997 TURBO 2007>>
- Porsche 997 GT2 2007>>
€820.05 含 VAT
当前 €803.65 含 VAT
由供应商供货 
相关产品
Mounting bolt kit for engine & gearbox stand
代码: SR028
Mounting bolt kit for engine & gearbox stand
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
Finally an elegant way to secure your engine to the engine yoke. No need for sockets, washers, and oversized nuts to take up slack. Use these knurled nuts and adapters to mount the different length case studs to the yoke. These adapters allow clearance for mounting the clutch. Hard-coated aluminum and stainless steel for years of service.
€77.78 含 VAT
当前 €76.22 含 VAT
库存
Connector removal tool - for VAG, Porsche
代码: 6547
Connector removal tool - for VAG, Porsche
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6547
您正在查看的产品与这些编号存在交叉引用关系
For the removal of VAG & Porsche push and pull connectors.
• For the removal of VAG and Porsche connectors.
• Connectors are found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly onto the push and pull connectors.
• Black plastic handle for easy grip.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
6547
6547
您正在查看的产品与这些编号存在交叉引用关系
€37.78 含 VAT
当前 €37.02 含 VAT
库存
Connector removal tool long series - for VAG/Porsche
代码: 7859
Connector removal tool long series - for VAG/Porsche
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
7859
您正在查看的产品与这些编号存在交叉引用关系
For the removal of VAG and Porsche connectors found on MAF sensors, coil packs, headlights, fog lights, level sensors, map sensors etc.
• Fits directly on to the push and pull connectors and opens the locking tabs as pressure is applied.
• Applications include MAF sensors, coil packs, MAP sensors, CPS sensors and light connectors.
• Soft grip T-handle.
• 20mm offset head, 160mm long. EU Registered Design.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
7859
7859
您正在查看的产品与这些编号存在交叉引用关系
€23.16 含 VAT
当前 €22.70 含 VAT
库存
