后悬挂连接杆及衬套
按品牌过滤
衬套套件悬架重建标准。保时捷 911 / 911 turbo 1977 - 1985
代码: SUSPBUSHKIT/3
衬套套件悬架重建。
前桥和后桥
适合:
保时捷 911 - 1977 年至 1986 年
保时捷 911 Turbo - 1977 年至 1988 年
采用标准岸级(未升级)的悬架衬套重建套件
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€715.90 含 VAT
当前 €680.10 含 VAT
即将抵达
衬套套件悬架重建标准。保时捷 911 turbo 1975 - 1976
代码: SUSPBUSHKIT/6
衬套套件悬架重建。
前桥和后桥
适合:
保时捷 911 turbo 3.0ltr - 1975 年至 1976 年
采用标准岸级(未升级)的悬架衬套重建套件
产品车辆组
- Porsche 911 1975-1977 3.0L Turbo (930)
€746.60 含 VAT
当前 €709.27 含 VAT
即将抵达
Drop link bush, rear top. Porsche 911 1965-77
代码: 90134378200/1KIT
Drop link bush, rear top.
SET OF 2
Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 15
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90134378200
您正在查看的产品与这些编号存在交叉引用关系
SET OF 2
Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 15
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90134378200
90134378200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1975-1977 3.0L Turbo (930)
€5.96 含 VAT
当前 €5.66 含 VAT
库存
Adjustable drop links (pair) rear. Porsche 911 (1978-89) With Factory Swaybar
代码: 1161
These 2 coupling rods (L+R) are for the stabilizer linkage on the rear axle
for Porsche 911 G SC Stabilizer rear axle UNIBALL
Replacement for 93033307100, 93033307101, 93033307200, 93033307201
Fits:
Porsche 911 G 1978 - 1989
ONLY for the following engine codes:
911.83 / 930.09 / 930.10 / 930.19 / 930.20 / 930.21 / 930.25 / 930.26 / 930.60 / 930.66
Advantages:
• More direct response of the stabilizer
• Higher overall stiffness of the chassis
• Corrosion protection due to electrogalvanizing
• Lifetime lubrication due to brass plain bearings.
• Adjustable against each other to adjust wheel loads.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1161
您正在查看的产品与这些编号存在交叉引用关系
for Porsche 911 G SC Stabilizer rear axle UNIBALL
Replacement for 93033307100, 93033307101, 93033307200, 93033307201
Fits:
Porsche 911 G 1978 - 1989
ONLY for the following engine codes:
911.83 / 930.09 / 930.10 / 930.19 / 930.20 / 930.21 / 930.25 / 930.26 / 930.60 / 930.66
Advantages:
• More direct response of the stabilizer
• Higher overall stiffness of the chassis
• Corrosion protection due to electrogalvanizing
• Lifetime lubrication due to brass plain bearings.
• Adjustable against each other to adjust wheel loads.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1161
1161
93033307100
93033307200
93033307101
93033307201
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€98.77 含 VAT
当前 €96.79 含 VAT
库存
Drop link bush, Rear top. Porsche 911 1965-77
代码: 90134378200
Drop Link Bush Rear Top.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90134378200
您正在查看的产品与这些编号存在交叉引用关系
Price is for each.
Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 15
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90134378200
90134378200
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
价格: €5.08 含 VAT
库存
Drop link bush, rear top. Porsche 911 1965-77
代码: 90134378200/1
Drop link bush, rear top.
Price is each.
Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Porsche 914
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 15
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90134378200
您正在查看的产品与这些编号存在交叉引用关系
Price is each.
Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Porsche 914
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 15
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90134378200
90134378200
9400017
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1975-1977 3.0L Turbo (930)
€2.98 含 VAT
当前 €2.89 含 VAT
库存
后下拉杆。保时捷 911 1965-77 / 930 1975-77 (90133373101 / 90133373201)
代码: 90133373
后部下降连杆。
#保时捷#
适合:
保时捷 911 1965-77
保时捷 930 Turbo 3.0L 1975-77
请点击“放大”查看大部件图。
图表参考编号:14
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90133373
您正在查看的产品与这些编号存在交叉引用关系
#保时捷#
适合:
保时捷 911 1965-77
保时捷 930 Turbo 3.0L 1975-77
请点击“放大”查看大部件图。
图表参考编号:14
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90133373
90133373101
90133373201
1650451270
1650451280
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
价格低至: €49.78 含 VAT
Drop link, Rear. Porsche 911 1965-77 / 930 1975-77 (90133373101 / 90133373201)
代码: 90133373
Drop link, Rear.
Fits:
Porsche 911 1965-77
Porsche 930 Turbo 3.0L 1975-77
Please click 'Zoom in' for large parts diagram.
Diagram ref no: 14
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90133373
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1965-77
Porsche 930 Turbo 3.0L 1975-77
Please click 'Zoom in' for large parts diagram.
Diagram ref no: 14
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90133373
90133373101
90133373201
1650451270
1650451280
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
价格低至: €39.83 含 VAT
Front and Rear QuickChange™ Blade Style Sway bar. Porsche 911 / 912 / 930 / 914
代码: 227002
Front QuickChange™ Blade Style Sway bar
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
227002
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
227002
90134370303
91434307500
90134370301
90134370302
90134370303
90134370304
91134370306
91134379202
91134370310
91134379203
91134370313
2270020
2270022
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
价格低至: €1,632.68 含 VAT
Polyurethane Suspension Bush Kit. Porsche 911 1974 - 85 SuperPro
代码: KIT5217K
SuperPro Polyurethane Suspension Bush Kit.
Fits:
Porsche 911 1974-85 Cars with 18mm Front and 22mm Rear anti-roll bars
This kit includes
1 x SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 x SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1x SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1375K Rear Engine Mounting Bush Kit 4 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 x SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 x SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 911 1974-85 Cars with 18mm Front and 22mm Rear anti-roll bars
This kit includes
1 x SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 x SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1x SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF1375K Rear Engine Mounting Bush Kit 4 Bushes, 2 Steel Tubes, SuperPro Grease
1 x SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 x SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 x SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 x SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€465.71 含 VAT
当前 €456.40 含 VAT
库存
Rear retro RSR adjustable sway bar. Porsche 911 / 912 / 930 / 914
代码: 1-RSRRSBA
Rear retro RSR adjustable sway bar.
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Retro RSR Adjustable Sway Bar System
Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.
Drop links
Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.
Lightweight
Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings
Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.
Through-body style front bar
Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.
Retro-Look Arms
Steel arms are similar to the original RSR type and have drilled adjustment positions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1-RSRRSBA
您正在查看的产品与这些编号存在交叉引用关系
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Retro RSR Adjustable Sway Bar System
Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.
Drop links
Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.
Lightweight
Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings
Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.
Through-body style front bar
Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.
Retro-Look Arms
Steel arms are similar to the original RSR type and have drilled adjustment positions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1-RSRRSBA
91133370111
477411313M
93033370125
93033370129
93033370128
91133370107
477411313N
93033370123
91133370101
91133370104
90133370103
90133370104
93033370100
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
价格低至: €845.49 含 VAT
显示从1到11(共11个产品)
也可在这些页面找到
您可能也喜欢
流行车型