高流量空气滤清器
NOTE: For manual cars only
Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.
The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.
The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.
No "Check engine" lights as you retain the factory MAF.
Please note this item fits MANUAL CARS ONLY Replacing Factory black hose 99611022157.
Kit Contains:
1 x Cold Air Hose
2 x Jubilee Clips
1 x Alloy Stopper plug
*Please add a K&N / BMC or DesignTek air filter with this kit as it is not included
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
INDUCTIONKIT20
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
使用我们的 ECU 重新映射存档和额外的 +30Bhp 进行 Dyno 测试功率增益要了解有关此功率增加的更多信息,请单击此处
瞳孔直径
几十年来,保时捷一直通过限制进气道来控制发动机输出。通过使用较小的节气门体,这一方法已成功实现。这种简单的功率控制解决方案是一种非常有效的方法,可以防止低级车型超越某些旗舰车型,尤其是拥有丰富赛车血统的车型。虽然工厂发动机套件是性能出色的机器,但它们的设计和开发是为了实现特定的性能数字,以满足目标人群并与竞争对手品牌竞争。不幸的是,追求更高保时捷驾驶体验的驾驶爱好者需要的性能水平远远超出目标市场。
一旦工厂 ECU/DME 满足所有必要的“适应”要求,功率改进将完全实现。可以通过一系列“硬拉”或全油门加速来加速这一过程。当然,这只能在封闭的赛道上进行。
感应套件
专为实现最大功率和最大噪音而设计。这款工程系统消除了 OEM 限制性空气箱,并采用了高流量锥形空气过滤器和密封新鲜空气室。与平板过滤器相比,锥形过滤器具有出色的空气流动特性。当空气通过过滤器时,锥形过滤器可以更好地塑造空气,从而产生更平滑、更直、更成型的空气。接下来,我们让 CMC 加工 MAF 外壳,使其公差与 OEM 外壳完全相同,以获得精确的 MAF 读数和无需检查发动机灯。此外,密封空气室将锥形空气过滤器与发动机舱隔开,使其只能吸入凉爽的外部空气以获得更多功率。最后,该系统由交联聚乙烯注塑而成,这种聚乙烯具有当今市场上所有单层可模塑材料中最低的热导率。这是保持进气温度低和提高功率的关键。
适合:
保时捷 997 Carrera
保时捷 996 Carrera*
(*适用于配备“电子加速器 (M620)”的汽车,不适用于早期的线控油门汽车)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
The all mighty 996 Turbo may be the perfect Porsche of them all to benefit from the IPD Plenum. Horsepower and torque gains are substantial and immediate (no adaptation required).
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 74mm "Competition" Plenum is designed to function with more seriously modified Turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of Turbos ranging from mildly modified to 1000+ HP.
This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This "Competition Turbo" Plenum will help modified 996 Turbos realize maximum performance.
The increased air flow and air speed develop by the larger Plenum is designed to work with larger turbos, intercoolers, intake piping, high flow Y Pipes and more aggressive software.
Horsepower gains start around 35 hp and deliver max power slightly higher in the rev range creating better top end performance without the drop in power experienced with the factory air distributor.
996 Turbo Competition Plenum: HP Gains 24 / Torque Gains 26.
Fits:
Porsche 996 Turbo/S/X50/ GT2
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
The all mighty 996 Turbo may be the perfect Porsche of them all to benefit from the IPD Plenum. Horsepower and torque gains are substantial and immediate (no adaptation required).
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 74mm "Competition" Plenum is designed to function with more seriously modified Turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of Turbos ranging from mildly modified to 1000+ HP.
This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This "Competition Turbo" Plenum will help modified 996 Turbos realize maximum performance.
The increased air flow and air speed develop by the larger Plenum is designed to work with larger turbos, intercoolers, intake piping, high flow Y Pipes and more aggressive software.
Horsepower gains start around 35 hp and deliver max power slightly higher in the rev range creating better top end performance without the drop in power experienced with the factory air distributor.
996 Turbo Competition Plenum: HP Gains 24 / Torque Gains 26.
Fits:
Porsche 996 Turbo/S/X50/ GT2
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
适合:
保时捷 保时捷 996 Carrera C2 3.6L
保时捷 保时捷 996 Carrera C4 3.6L
保时捷 保时捷 996 Carrera C2 3.4L*
保时捷 保时捷 996 Carrera C4 3.4L*
(*适用于配备“电子加速器 (M620)”的汽车,不适用于早期的线控油门汽车)
几十年来,保时捷一直通过限制进气道来控制发动机输出。通过使用较小的节气门体,这一方法已成功实现。这种简单的功率控制解决方案是一种非常有效的方法,可以防止低级车型超越某些旗舰车型,尤其是拥有丰富赛车血统的车型。虽然工厂发动机套件是性能出色的机器,但它们的设计和开发是为了实现特定的性能数字,以满足目标人群并与竞争对手品牌竞争。不幸的是,追求更高保时捷驾驶体验的驾驶爱好者需要的性能水平远远超出目标市场。
所有 IPD 增压室都提供显著的功率和扭矩增益,但与更大的节气门体结合使用时,它们的性能会更好。所有 IPD“竞赛”增压室都使用保时捷提供的第二大尺寸节气门体。在这种情况下,Competition Carrera 将工厂 OE 74 毫米节气门体升级为保时捷的 82 毫米 997 GT3 节气门体。我们所有的竞赛增压室都设计用于配备高性能排气系统的汽车。排气系统(集管、排气管和消声器)越广泛越好。优化进气和排气可以创造一个平衡的性能包,使发动机吸入和呼出更多的空气,从而产生更大的功率和扭矩。
IPD 率先采用了另一种新的增压室设计,即竞赛版 Carrera 增压室。我们独特而创新的内部合并收集器区域进一步增强了层流和容积效率。这种全新的方法不仅带来了巨大的性能提升,而且带来了更线性的功率输出和更好的油门响应。增益取决于预先存在的改装和安装的售后排气质量。我们所有人都“应该”知道,随着我们爬上所谓的性能阶梯,马力和扭矩变得越来越难找到,而且通常更昂贵。话虽如此,性能组件根据安装顺序产生不同的功率增益。IPD 会在原厂车上测试和评估所有产品,这建立了一个公平的竞争环境和更好的“同类”比较。然而,竞赛版 Carrera 增压室旨在与已经经过中度到重度改装的应用程序配合使用。功率增益会因每辆 Carrera 而异,但最重要的是,会有明显而令人印象深刻的增益,这一定会让任何保时捷 Carrera 驾驶爱好者满意。
一旦工厂 ECU/DME 满足所有必要的“适应”要求,功率改进将完全实现。可以通过一系列“硬拉”或全油门加速来加速这一过程。当然,这只能在封闭的赛道上进行。
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
High flow with excellent filtration.
This Product Fits:
Porsche 911 (996) 3.6 GT3 (360bhp) 03/99 - 03/03
Porsche 911 (996) 3.6 Turbo 03/00 -
Porsche 911 (997) 3.6 Carrera GT3 04/06 -
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3603001596
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 GT3 2007>>
This Product Fits:
Porsche 911 (996) 3.4 Carrera 2/4
Porsche 911 (996) 3.6 Carrera 2/4
Porsche 911 (997) 3.6 Carrera 2/4
Porsche 911 (997) 3.8 Carrera 2S /4S
Panel Filter Size:
- width - 171/128mm
- height - 3528mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
FB156
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
This Product Fits:
Porsche 996 GT2 / GT3 / TURBO
Panel Filter Size:
- width - 178mm
- height - 522mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
NOTE: For Tiptronic cars only
Please also add the following
1 x 0549290110
1 x 99951235002
1 x 99604000052
Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.
The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.
The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.
No "Check engine" lights as you retain the factory MAF.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
TB-5570
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
52mm
Fits: Porsche 996 C2 / C4 / C4S 1997-2004
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99604000052
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
This Product Fits:
Porsche 911 (996) 3.4L Carrera (301bhp) 06/1997-10/2001
Porsche 911 (996) 3.4L Carrera 2/4 (320bhp) 06/1999>>
Porsche 911 (996) 3.6L Carrera 2/4/4S (320bhp) 09/2001>>
Porsche 911 (996) 3.6L Carrera 2/4 (345bhp) 05/2002>>
Porsche 911 (997) 3.6L Carrera 07/2004>>
Porsche 911 (997) 3.8L Carrera S 07/2004>>
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33-2786
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
This Product Fits:
Porsche 911 (996) 3.6L GT2 2001-05
Porsche 911 (996) 3.6L GT3 1999-05
Porsche 911 (996) 3.6L Turbo 2000-05
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
33-2189
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
Fits:
Porsche 996 C2 1998-2004
Porsche 996 C4 1998-2004
Porsche 996 C4S 2000-2004
Not Turbo Models
Porsche 997 C2 / C4 2005>>
3.6L Engines
Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive air box and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected moulded from cross link polyethylene which has the lowest thermal conductivity rating of any single-layered mould-able material available on the market today. This is key in keeping intake temperatures low and increasing power.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
57-7000
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
K&N Recharger Kit 99-5000EU is designed for cleaning your K&N oiled cotton air filter when it is time to be serviced.
Part 99-5000EU is labeled in English, Spanish, Swedish, Polish and Czech for use in Europe.
The kit comes with K&N Power Kleen air filter cleaner and air filter oil.
99-5000EU will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition. K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. After the air filter fully dries re-oil your air filter then reinstall it.
This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.
NOTE: This product has got shipping restrictions for export
Please note this item can not be sent out by plane. Deliveries only to European countries by road service
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99-5000EU
您正在查看的产品与这些编号存在交叉引用关系
Rennline air intake, carbon fibre.
Fits:
Porsche 996 C2 / C4 / C4S
Porsche 997 C2 / C4 / C2S / C4S
Product Description
With the Rennline Carbon Fibre Intake, your drive will never feel better. Made from carbon fibre with a high-flow air filter and stainless steel fasteners, this intake performs as well as it looks.
This system provides improved flow dynamics and unlocks hidden induction acoustics.
Features
- Save precious weight over stock unit
- Improved airflow over OEM unit.
- Improved induction noise
- Easily replace filters (without removing the box)
- Smooth carbon inlet for high velocity air
- Replacement filters available under SKU# M95
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
M110
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- 发动机改装及升级
- 电子燃油喷射节气门套件
- ECU 重映射(自装式)
- 电子节气门增压器
- IRIDIUM POWER 火花塞
- IRIDIUM RACING 火花塞
- 等离子直接点火线圈
- 进气口套件
- 硅胶软管/套件
- 分流阀
- 短变速杆套件
- 中冷器
- 涡轮增压器
- 高性能增压室
- ECU 读取器/故障排查器
- 排气套件
- 增压器套件
- 燃油添加剂
- 踏板/地板/赛道地垫 左侧驾驶汽车
- 踏板/地板/赛道地垫 右侧驾驶汽车
- 灭火器座
- Brey-Krause 灭火器座
- 拖车孔钩及牵引绳
- 离合器/飞轮/液压装置
- 赛道及赛车用冷却液散热器
- Wössner 煅造活塞套件
- CP Carrillo 连杆
- Capricorn 发动机零部件
- Goodridge 不锈钢制动软管