KW HLS(液压升降系统)
Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012
Lowering FRONT / REAR: 20-45mm / 20-45mm
Adjustment FRONT / REAR: Thread / Thread
Mounting position hydraulics: FRONT
Damping adjustment: Rebound and Compression
Damping Material coilover: Stainless steel
Content of delivery: Set (Front + Rear) with HLS 2
KW Hydraulic Lift-System
Make life easy when negotiating obstacles for sporty cars with low ground clearance.
More ground clearance by the push of a button
With the HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm.
KW Hydraulic Lift System
This prevents damage to your aerodynamic components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or without a KW coilover kit, depending on the type of car and the model. If you cannot find your vehicle in our KW HLS product range, our engineers have also developed a universal lift system.
A great solution made by KW
For a wide range of super cars and general everyday cars our HLS is available as an application-specific solution. Included in the delivery are such parts as the hydraulic lines or hydraulic pump adapted to your vehicle, all components will fit perfectly to your sports car. No matter if you want to combine the HLS with your series suspension kit or our KW coilovers which are one of the worlds top aftermarket products, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies of the international automotive industry place their trust in KW coilover kits.
The lift kit "HLS 2" is only installed on the front axle. "HLS 4" allows you to lift the entire vehicle. A hydraulic cylinder is installed between spring plate and springs of each KW strut. The great advantage of the hydraulic system is that driving dynamics are not affected. The delivery content for all HLS lift kit versions include a control unit, which is connected to the vehicles on-board electronics. The vehicle will be automatically lowered at a certain speed to the original level of the KW coilover kit or your series suspension.
- available as complete solution including KW coilovers
- or as a conversion kit
- can be activated from inside the vehicle via an LED
- control button or by an optional remote control
- can be activated while driving (up to 80 km/h)
- fast lifting within 4-5 seconds (HLS 2)
- absolutely corrosion restistant (coated cylinder components made of aluminum)
This product is a special order item allow 24 working days - 8 weeks for delivery.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
35271215
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012
Lowering FRONT / REAR: 20-45mm / 20-45mm
Adjustment FRONT / REAR: Thread / Thread
Mounting position hydraulics: FRONT + REAR
Damping adjustment: Rebound and Compression Damping
Material coilover: Stainless steel
Content of delivery: Set (FRONT + REAR) with HLS 4
KW Hydraulic Lift-System
Make life easy when negotiating obstacles for sporty cars with low ground clearance.
More ground clearance by the push of a button
With the HLS lift system you can lift your sports car or lowered vehicle to safely negotiate obstacles such as speedbumps, railroad crossings, road works, garages and underground car parks. Depending on the version of the HLS lift system your vehicle can be hydraulically lifted either at the front axle or on both axles by up to 45 mm.
KW Hydraulic Lift System
This prevents damage to your aerodynamic components, underbody protection or even oil sump. The lift system is available either as a vehicle-specific solution with or without a KW coilover kit, depending on the type of car and the model. If you cannot find your vehicle in our KW HLS product range, our engineers have also developed a universal lift system.
A great solution made by KW
For a wide range of super cars and general everyday cars our HLS is available as an application-specific solution. Included in the delivery are such parts as the hydraulic lines or hydraulic pump adapted to your vehicle, all components will fit perfectly to your sports car. No matter if you want to combine the HLS with your series suspension kit or our KW coilovers which are one of the worlds top aftermarket products, the choice is yours. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies of the international automotive industry place their trust in KW coilover kits.
The lift kit "HLS 2" is only installed on the front axle. "HLS 4" allows you to lift the entire vehicle. A hydraulic cylinder is installed between spring plate and springs of each KW strut. The great advantage of the hydraulic system is that driving dynamics are not affected. The delivery content for all HLS lift kit versions include a control unit, which is connected to the vehicles on-board electronics. The vehicle will be automatically lowered at a certain speed to the original level of the KW coilover kit or your series suspension.
- available as complete solution including KW coilovers
- or as a conversion kit
- can be activated from inside the vehicle via an LED
- control button or by an optional remote control
- can be activated while driving (up to 80 km/h)
- fast lifting within 4-5 seconds (HLS 2)
- absolutely corrosion restistant (coated cylinder components made of aluminum)
This product is a special order item allow 24 working days - 8 weeks for delivery.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
35271415
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Fits:
Porsche 997 Turbo - Raises 10-30mm
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
- Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions
This product is a special order item allow 24 working days -8 weeks for delivery.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
19271223
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Turbo 2009>>
Fits
Porsche 997 C2 - Raises 20-45mm
KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
19271215
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Fits:
Porsche 997 C2
Front = Raises 20-45mm
Rear = Raises 20-45mm
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days - 8 weeks for delivery.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
19271415
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
Fits:
Porsche 997 Turbo
Front = Raises 10-30mm
Rear = Raises 10-30mm
KW HLS (Hydraulic Lift System)
helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm
The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.
Version HLS 4
HLS 4 which enables FRONT & REAR axles to be lifted and lowered
• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.
This product is a special order item allow 24 working days -8 weeks for delivery.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
19271423
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 TURBO 2007>>
- Porsche 997 MKII Turbo 2009>>
KW HLS(液压升降系统)可帮助跑车避免道路间隙困难 将车辆升高至 45 毫米 HLS 为降低的车辆提供额外的道路间隙。展开时,可产生 30 毫米至 45 毫米的升力,从而
- 支撑架
- 防侧翻稳定杆
- 运动弹簧
- 前控制臂
- 后控制臂
- 前悬挂连接杆
- 后悬挂连接杆
- 发动机支架
- 变速箱座
- 前侧车顶支架
- 后侧车顶支架
- 转向横拉杆
- 前副车架
- 后副车架
- 气动升降系统
- 悬架控制单元
- 防翻架
- Bilstein B4 标准替换件
- Bilstein B4(带 PASM 按钮的车辆)
- Bilstein SPORT B6 减震器
- Bilstein SPORT B6(带 PASM 按钮的车辆)
- Bilstein SPRINT B8 减震器
- Bilstein SPRINT B8(带 PASM 按钮的车辆)
- Bilstein B12 调校悬架套件
- Bilstein B14 PSS 避震悬架套件
- Bilstein B16 PSS9/10 高度减震可调避震悬架套件
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins 道路及赛道悬架
- SuperPro 聚氨酯衬套
- Powerflex 聚氨酯衬套
- Powerflex 黑色系列衬套
- H&R 可调悬架套件
- H&R Cup-Kit 系列运动悬架
- KW 变体 1 Inox 悬架套件
- KW 变体 2 Inox 可调回弹减震悬架
- KW 变体 3 Inox 可调悬架套件
- KW Clubsport 避震悬架套件
- KW Clubsport 避震悬架套件(带车顶支架)
- KW DDC(带 ECU 避震悬架套件)
- Eibach Pro-Tronic PASM 拆卸套件
- Sachs 高性能悬架 CSS
- Nitron 汽车系列