Porsche

Throttle Valve Control Unit.
The Porsche Throttle Valve Control Unit is a genuine electronic engine management component designed to precisely control the operation of the electronically actuated throttle valve. Engineered to Porsche's exact specifications for performance, reliability and seamless integration, this control unit ensures accurate throttle response, efficient airflow management and optimum engine performance across all driving conditions.  

Fits:

• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13  

Diagram Ref No 9

Working in conjunction with the engine control module (ECU), accelerator pedal position sensor and throttle body, the throttle valve control unit continuously adjusts the throttle opening based on driver input and engine operating parameters. This precise electronic control helps optimise engine power delivery, fuel efficiency, emissions and overall drivability.  

What This Product Does:

• Controls the operation of the electronic throttle valve.
• Regulates airflow entering the engine.
• Communicates with the engine management system.
• Provides accurate throttle response to driver input.
• Supports efficient fuel combustion and engine performance.
• Helps optimise fuel economy and emissions.
• Maintains stable idle speed.
• Contributes to smooth acceleration and overall drivability.

Symptoms Of Wear Or Failure:

• Delayed or unresponsive throttle response.
• Engine warning light illumination.
• Reduced engine power or limp-home mode.
• Rough or unstable idle.
• Hesitation during acceleration.
• Irregular engine performance.
• Throttle-related fault codes stored in the ECU.
• Unexpected fluctuations in engine speed.
• Difficulty maintaining consistent acceleration.
• Increased fuel consumption.

Why Replacement Matters:

• The throttle valve control unit is a critical part of the electronic engine management system, continuously processing signals and controlling throttle operation throughout every drive. Over time, electronic components can deteriorate due to heat, vibration, moisture or age, leading to unreliable throttle control and reduced engine performance.
• A malfunctioning control unit can cause poor throttle response, inconsistent acceleration and activation of the vehicle's fail-safe operating mode, significantly affecting drivability. Continued operation with a faulty throttle control system may also reduce fuel efficiency, increase emissions and place additional stress on related engine management components.
• Replacing a faulty throttle valve control unit restores precise throttle operation, reliable engine performance and smooth power delivery. A genuine Porsche replacement ensures factory-correct compatibility, dependable electronic performance and long-term reliability, helping maintain the performance, efficiency and driving experience expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95811036305

The product you are viewing cross references to these numbers

Vent Valve Brake Caliper. 
The Porsche Vent Valve Brake Caliper is a genuine brake system component designed to allow the safe bleeding and venting of air from the brake caliper hydraulic circuit. Engineered to Porsche's exact specifications for fit, sealing performance and durability, this small but critical component ensures that the braking system can be properly serviced and maintained for optimal hydraulic performance.  
Sold Each.
x4 Required Per Car.

Fits:

• Porsche 911 1969 2.0L / 912 SWB (F)
• Porsche 911 1968-1971 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1975-1977 3.0L Turbo (930)  

Diagram Ref No 24

Manufactured from high-quality corrosion-resistant metal, the vent valve (bleed screw) provides a secure seal during normal operation while allowing controlled release of air and brake fluid during brake bleeding procedures. Its precision-machined design ensures reliable sealing under the high hydraulic pressures generated within the braking system.

What This Product Does:

• Allows air to be removed from the brake hydraulic system.
• Facilitates brake bleeding and maintenance procedures.
• Ensures proper hydraulic pressure within the brake caliper.
• Helps maintain a firm and responsive brake pedal feel.
• Provides a secure seal during normal brake operation.
• Supports safe and efficient braking performance.
• Prevents hydraulic pressure loss when correctly installed.
• Forms an essential part of the brake caliper assembly.

Symptoms Of Wear Or Failure:

• Brake fluid leaks around the bleed valve.
• Soft or spongy brake pedal feel.
• Difficulty bleeding the braking system.
• Rounded, seized or damaged bleed screw head.
• Corrosion around the vent valve.
• Air repeatedly entering the hydraulic system.
• Reduced braking performance.
• Fluid seepage from the caliper.
• Inability to properly seal after servicing.
• Brake warning indications due to fluid loss.

Why Replacement Matters:

• Brake vent valves are exposed to moisture, road salt, dirt, heat cycles and repeated servicing throughout their lifespan. Over time, corrosion can cause the valve to seize, while damaged threads or sealing surfaces may allow brake fluid leaks or air ingress into the hydraulic system.
• A faulty vent valve can compromise the effectiveness of brake bleeding procedures, resulting in trapped air within the hydraulic circuit and a reduction in braking performance. Even minor fluid leaks can lead to pressure loss, reduced braking efficiency and increased safety risks.
• Replacing a worn or damaged vent valve restores proper sealing and ensures the braking system can be correctly maintained. A genuine Porsche replacement provides factory-correct fitment, dependable sealing performance and long-term durability, helping preserve the safety, reliability and braking performance expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91135191900

The product you are viewing cross references to these numbers

Compensating Line Brake Caliper (S-Caliper), Front.
The Porsche Front Brake Caliper Compensating Line (S-Caliper) is a genuine brake hydraulic component designed to connect the hydraulic chambers within Porsche S-type front brake calipers. Engineered to Porsche's exact specifications for fit, pressure resistance and reliability, this compensating line ensures even brake fluid distribution throughout the caliper assembly, enabling consistent braking performance and balanced brake pad application.  

Fits:

• Porsche 911 1969 2.0L / 912 SWB (F)
• Porsche 911 1968-1971 2.2L / 2.4L / 2.7L RS LWB (F)
• Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
• Porsche 911 1975-1977 3.0L Turbo (930)  

Diagram Ref No 18

Manufactured from high-quality corrosion-resistant metal tubing, the compensating line is designed to withstand the high hydraulic pressures, temperature fluctuations and demanding operating conditions experienced within the braking system. Precision-formed to match the original factory design, it provides secure, leak-free fluid transfer between caliper sections.  

What This Product Does:

• Transfers brake fluid between brake caliper hydraulic chambers.
• Ensures balanced hydraulic pressure throughout the caliper assembly.
• Supports even brake pad application across the brake disc.
• Maintains consistent braking performance.
• Helps optimise braking efficiency and control.
• Provides reliable hydraulic fluid circulation within the caliper.
• Supports safe and predictable braking operation.
• Forms an essential part of the front brake hydraulic system.

Symptoms Of Wear Or Failure:

• Brake fluid leaks around the caliper assembly.
• Reduced braking performance.
• Soft or spongy brake pedal feel.
• Uneven brake pad wear.
• Inconsistent braking response.
• Loss of hydraulic pressure.
• Visible corrosion or damage to the brake line.
• Brake warning light illumination due to fluid loss.
• Fluid contamination around the caliper.
• Reduced braking confidence and control.

Why Replacement Matters: 

• Brake compensating lines operate under extremely high hydraulic pressures and are continually exposed to moisture, road contaminants, heat cycles and environmental corrosion. Over time, corrosion, physical damage or fatigue can compromise the integrity of the line and increase the risk of fluid leakage.
• A damaged compensating line can reduce hydraulic pressure within the brake caliper, resulting in diminished braking performance, uneven brake operation and increased stopping distances. Because the braking system is a critical vehicle safety system, any hydraulic leak or loss of pressure should be addressed immediately.
• Replacing a worn or damaged compensating line restores proper hydraulic fluid transfer and ensures the brake caliper functions as intended. A genuine Porsche replacement provides factory-correct fitment, dependable sealing and long-term durability, helping maintain the braking performance, safety and driving confidence expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135199

The product you are viewing cross references to these numbers

Spring Plate, Front Brake Caliper.
The Porsche Front Brake Caliper Spring Plate is a genuine brake hardware component designed to secure and stabilise the brake pads within the front brake caliper assembly. Engineered to Porsche's exact specifications for fit, spring tension and durability, this component plays a critical role in maintaining proper brake pad positioning and ensuring smooth, quiet braking performance.  

Fits:

• Porsche 911 1989 3.2L G50

 
Diagram Ref No 18

Manufactured from high-strength spring steel with a corrosion-resistant finish, the spring plate is designed to withstand the extreme temperatures, vibration and mechanical loads generated during braking. It applies consistent pressure to the brake pads, helping to minimise movement within the caliper and contributing to precise, reliable braking performance.

What This Product Does:

• Secures and stabilises brake pads within the front brake caliper.
• Maintains correct brake pad alignment and positioning.
• Reduces brake pad movement during driving and braking.
• Helps prevent brake rattle and vibration.
• Minimises brake squeal and unwanted noise.
• Supports even brake pad contact with the brake disc.
• Promotes consistent braking performance.
• Forms an essential part of the front brake hardware assembly.

Symptoms Of Wear Or Failure:

• Rattling noises from the front brakes.
• Excessive brake pad movement within the caliper.
• Brake squeal during operation.
• Increased brake vibration.
• Uneven brake pad wear.
• Reduced brake pad stability.
• Corrosion or rust on the spring plate.
• Loss of spring tension.
• Distorted or damaged retaining hardware.
• Premature wear of brake pads and related components.

Why Replacement Matters:

• Brake spring plates are exposed to continuous heat cycles, vibration, moisture, road contaminants and braking forces. Over time, the spring steel can weaken, lose tension or become corroded, reducing its ability to hold the brake pads securely in position.
• A damaged or worn spring plate can allow unwanted brake pad movement, resulting in noise, vibration and uneven wear. If left unaddressed, loose brake hardware can compromise braking refinement and accelerate wear of brake pads, discs and caliper components.
• Replacing a worn front brake caliper spring plate restores proper brake pad retention and helps maintain quiet, smooth and consistent braking performance. A genuine Porsche replacement ensures factory-correct fitment, precise spring tension and long-term durability, helping preserve the braking performance, safety and driving confidence expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93035154203

The product you are viewing cross references to these numbers

Spring Plate, Front Brake Caliper.
The Porsche Front Brake Caliper Spring Plate is a genuine brake hardware component designed to secure and stabilise the brake pads within the front brake caliper assembly. Engineered to Porsche's exact specifications for fit, spring tension and durability, this component plays a critical role in maintaining proper brake pad positioning and ensuring smooth, quiet braking performance.  

Fits:

• Porsche 911 1984-1986 3.2L
• Porsche 911 1987-1989 3.2L G50
• Porsche 911 1975-1977 3.0L Turbo (930)
• Porsche 911 1978-1989 3.3L Turbo (930) 

 
Diagram Ref No 17

Manufactured from high-strength spring steel with a corrosion-resistant finish, the spring plate is designed to withstand the extreme temperatures, vibration and mechanical loads generated during braking. It applies consistent pressure to the brake pads, helping to minimise movement within the caliper and contributing to precise, reliable braking performance.

What This Product Does:

• Secures and stabilises brake pads within the front brake caliper.
• Maintains correct brake pad alignment and positioning.
• Reduces brake pad movement during driving and braking.
• Helps prevent brake rattle and vibration.
• Minimises brake squeal and unwanted noise.
• Supports even brake pad contact with the brake disc.
• Promotes consistent braking performance.
• Forms an essential part of the front brake hardware assembly.

Symptoms Of Wear Or Failure:

• Rattling noises from the front brakes.
• Excessive brake pad movement within the caliper.
• Brake squeal during operation.
• Increased brake vibration.
• Uneven brake pad wear.
• Reduced brake pad stability.
• Corrosion or rust on the spring plate.
• Loss of spring tension.
• Distorted or damaged retaining hardware.
• Premature wear of brake pads and related components.

Why Replacement Matters:

• Brake spring plates are exposed to continuous heat cycles, vibration, moisture, road contaminants and braking forces. Over time, the spring steel can weaken, lose tension or become corroded, reducing its ability to hold the brake pads securely in position.
• A damaged or worn spring plate can allow unwanted brake pad movement, resulting in noise, vibration and uneven wear. If left unaddressed, loose brake hardware can compromise braking refinement and accelerate wear of brake pads, discs and caliper components.
• Replacing a worn front brake caliper spring plate restores proper brake pad retention and helps maintain quiet, smooth and consistent braking performance. A genuine Porsche replacement ensures factory-correct fitment, precise spring tension and long-term durability, helping preserve the braking performance, safety and driving confidence expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93035154103

The product you are viewing cross references to these numbers

Control Unit For Parking Aid.
The Porsche Control Unit for Parking Aid is a genuine electronic control module designed to manage and coordinate the operation of the vehicle's parking assistance system. Engineered to Porsche's exact specifications for compatibility, reliability and performance, this control unit serves as the central processor for the parking aid system, ensuring accurate obstacle detection and driver assistance during low-speed manoeuvres.  

Fits:

• Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019-21
• Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019-21
• Porsche Cayman GTS 718 4.0L Manual (400 Bhp) >>2021
• Porsche Cayman GTS 718 4.0L PDK (400 Bhp) >>2021
• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21

  
Diagram Ref No 16

The module receives and processes signals from the vehicle's ultrasonic parking sensors, interpreting proximity data and communicating with the vehicle's onboard systems to provide audible warnings and visual guidance where equipped. Designed for seamless integration with Porsche's advanced electrical architecture, it helps improve parking precision, convenience and safety.  

What This Product Does:

• Controls and manages the parking assistance system.
• Processes signals from front and rear parking sensors.
• Detects nearby obstacles during parking manoeuvres.
• Activates audible parking warning tones.
• Supports visual parking aid displays where fitted.
• Communicates with the vehicle's electronic control network.
• Improves driver awareness in confined spaces.
• Helps reduce the risk of low-speed parking damage.

Symptoms Of Wear Or Failure:

• Parking sensors not functioning correctly.
• Complete loss of parking assistance operation.
• Constant warning tones with no obstacle present.
• Intermittent sensor performance.
• Parking aid warning messages on the instrument cluster.
• Fault codes related to the parking assistance system.
• Visual parking display failing to operate.
• Incorrect obstacle detection or distance readings.
• Parking system unavailable messages.
• Communication errors with other vehicle control modules.

Why Replacement Matters:

• The parking aid control unit is a sophisticated electronic component that operates within the vehicle's communication network and is exposed to heat, vibration, electrical loads and environmental conditions throughout its service life. Over time, internal circuitry or electronic components can deteriorate, leading to unreliable operation or complete system failure.
• A malfunctioning control unit can disable the parking assistance system, reducing driver awareness of nearby obstacles and increasing the likelihood of accidental parking damage. It may also trigger warning messages, fault codes and communication errors that affect the functionality of related vehicle systems.
• Replacing a faulty parking aid control unit restores proper communication between the parking sensors and the vehicle's electronic systems, ensuring accurate obstacle detection and reliable parking assistance performance. A genuine Porsche replacement provides factory-correct compatibility, dependable operation and long-term reliability, helping maintain the convenience, safety and premium driving experience expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B919475S

The product you are viewing cross references to these numbers

Front Bumper Upper Centre Disc Grille, Satin Black.
The Porsche Front Bumper Upper Centre Disc Grille, Satin Black is a genuine exterior body component designed to form part of the vehicle's front bumper air intake assembly. Engineered to Porsche's exact specifications for fit, appearance and durability, this centre grille enhances the vehicle's front-end styling while providing essential airflow to cooling and ventilation systems.  

Fits:

• Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
• Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
• Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
• Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
• Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17

  
Diagram Ref No 35

Finished in an attractive satin black coating, the grille complements the factory exterior design and integrates seamlessly with the surrounding bumper components. Manufactured from high-quality impact-resistant materials, it is designed to withstand exposure to road debris, weather conditions and everyday driving environments while maintaining its appearance and structural integrity.  

What This Product Does:

• Forms part of the front bumper air intake assembly.
• Allows airflow to cooling system components behind the bumper.
• Helps support engine and auxiliary cooling efficiency.
• Protects radiators, condensers and other components from larger debris.
• Maintains the original appearance of the front bumper.
• Enhances the vehicle's exterior styling.
• Contributes to aerodynamic airflow management.
• Supports the structural integrity of the front bumper assembly.

Symptoms Of Wear Or Failure:

• Cracked, broken or missing grille sections.
• Impact damage caused by stones or road debris.
• Scratches, scuffs or surface deterioration.
• Fading or discolouration of the satin black finish.
• Loose or damaged mounting points.
• Poor fitment within the bumper assembly.
• Increased exposure of cooling components to debris.
• Rattling or vibration noises from loose grille sections.
• Reduced visual appeal of the vehicle's front end.

Why Replacement Matters:

• The front bumper grille is continuously exposed to stone impacts, road debris, insects, weather conditions and UV exposure. Over time, these factors can cause physical damage, fading or deterioration that affects both appearance and functionality.
• A damaged grille may leave sensitive cooling system components more vulnerable to debris impact while diminishing the vehicle's overall appearance. Broken mounting points or loose grille sections can also create unwanted vibration and may eventually become detached.
• Replacing a damaged front bumper upper centre grille restores the original appearance of the vehicle while maintaining proper airflow and protection for cooling system components. A genuine Porsche replacement ensures factory-correct fitment, premium finish quality and long-term durability, preserving both the styling and functionality expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

958505973009B9

The product you are viewing cross references to these numbers

Radiator For Water Coolant.
The Porsche Water Coolant Radiator is a genuine engine cooling system component designed to dissipate heat from the engine coolant and maintain the correct operating temperature of the engine. Engineered to Porsche's exact specifications for fit, cooling efficiency and durability, this radiator plays a critical role in protecting the engine from overheating while ensuring optimum performance and reliability.  

Fits:

• Porsche 9YA Cayenne GTS V8 4.0L Petrol (460Hp) 2020-23
• Porsche 9YA Cayenne Coupe GTS V8 4.0L Petrol (460Hp) 2021-23
• Porsche 9YA Cayenne Turbo V8 4.0L Petrol (550Hp) 2020-23
• Porsche 9YA Cayenne Coupe Turbo V8 4.0L Petrol (550Hp) 2019-23
• Porsche 9YA.2 Cayenne S V8 4.0L Petrol (474Hp) 2023>>
• Porsche 9YA.2 Cayenne S Coupe V8 4.0L (474Hp) 2023>> 

 
Diagram Ref No 1

Constructed from high-quality aluminium with precision-engineered cooling fins and internal coolant passages, the radiator maximises heat transfer as coolant flows through the unit. Working in conjunction with the thermostat, cooling fans and water pump, it helps regulate engine temperature under all driving conditions, from everyday commuting to heavy-load and high-performance driving.  

What This Product Does:

• Dissipates heat from the engine coolant.
• Maintains correct engine operating temperature.
• Prevents engine overheating.
• Supports efficient coolant circulation throughout the cooling system.
• Helps maintain optimum engine performance and fuel efficiency.
• Protects critical engine components from heat-related damage.
• Works with cooling fans, thermostat and water pump to regulate temperature.
• Contributes to long-term engine reliability and durability.

Symptoms Of Wear Or Failure:

• Engine overheating or elevated coolant temperatures.
• Coolant leaks from the radiator core or end tanks.
• Low coolant level warnings.
• Visible corrosion or damage to the radiator fins.
• Coolant pooling beneath the vehicle.
• Reduced cooling system efficiency.
• Frequent overheating during traffic or heavy-load driving.
• Blocked or damaged cooling fins restricting airflow.
• Sweet coolant odour from the engine bay.
• Cooling system pressure loss.

Why Replacement Matters:

• The radiator is continuously exposed to coolant flow, pressure fluctuations, road debris, moisture, corrosion and temperature extremes. Over time, internal passages can become restricted, cooling fins may become damaged and corrosion can weaken the radiator structure, reducing its ability to dissipate heat effectively.
• A failing radiator can compromise cooling system performance, increasing the risk of engine overheating. Continued operation with inadequate cooling can lead to severe engine damage, including warped cylinder heads, damaged head gaskets and premature wear of internal engine components.
• Replacing a worn or damaged radiator restores proper cooling system efficiency, helps maintain stable operating temperatures and protects the engine from costly overheating-related damage. A genuine Porsche replacement ensures factory-correct fitment, optimal heat dissipation and long-term reliability, helping preserve the performance, efficiency and durability expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95812125100

The product you are viewing cross references to these numbers

Refrigerant Line, Condenser.
The Porsche Refrigerant Line, Condenser is a genuine air conditioning system component designed to transport refrigerant between the condenser and other critical climate control system components. Engineered to Porsche's exact specifications for fit, pressure resistance and durability, this refrigerant line plays a vital role in maintaining efficient refrigerant circulation and ensuring optimal air conditioning performance.  

Fits:

• Porsche 9YA Cayenne S V6 2.9L Petrol (440Hp) 2018-23
• Porsche 9YA Cayenne Coupe S V6 2.9L Petrol (440Hp) 2019-23
• Porsche 9YA.2 Cayenne V6 3.0L Petrol (353Hp) 2023>>
• Porsche 9YA.2 Cayenne Coupe V6 3.0L (353Hp) 2023>>

  
Diagram Ref No 6

Manufactured from high-quality aluminium tubing and reinforced hose sections where required, the line is designed to withstand the high pressures, temperature fluctuations and vibrations encountered within modern automotive climate control systems. Precision-formed to follow the original factory routing, it provides secure, leak-free connections that help maintain system efficiency and long-term reliability.  

What This Product Does:

• Transfers refrigerant between the condenser and associated A/C system components.
• Maintains correct refrigerant flow throughout the climate control system.
• Supports efficient heat exchange and cooling performance.
• Helps maintain correct operating pressures within the refrigerant circuit.
• Contributes to consistent cabin cooling and passenger comfort.
• Provides secure, sealed connections within the air conditioning system.
• Supports reliable operation of the climate control system.
• Helps maintain overall A/C system efficiency and performance.

Symptoms Of Wear Or Failure:

• Reduced air conditioning cooling performance.
• Warm air blowing from cabin vents.
• Refrigerant leaks from pipework or connection points.
• Oily residue around A/C fittings or hose connections.
• Frequent refrigerant recharge requirements.
• Air conditioning pressure-related fault codes.
• Hissing noises caused by escaping refrigerant.
• Excessive or irregular compressor cycling.
• Climate control warning messages.
• Visible corrosion, cracking or physical damage to the line.

Why Replacement Matters:

• Condenser refrigerant lines operate under significant pressure and are continuously exposed to vibration, heat, moisture, road debris and environmental contaminants. Over time, metal sections can corrode, hose sections may deteriorate and sealing surfaces can wear, resulting in refrigerant leaks and reduced system efficiency.
• A leaking refrigerant line can cause a loss of refrigerant, reducing cooling performance and increasing strain on the air conditioning compressor. If left unresolved, low refrigerant levels can accelerate wear of expensive climate control components and may eventually lead to compressor failure or complete A/C system malfunction.
• Replacing a worn or damaged refrigerant line restores proper refrigerant circulation, maintains system pressure and ensures efficient climate control operation. A genuine Porsche replacement guarantees factory-correct fitment, reliable sealing performance and long-term durability, helping preserve the comfort, refinement and performance expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y0816741T

The product you are viewing cross references to these numbers

Refrigerant Line.
The Porsche Refrigerant Line is a genuine air conditioning system component designed to transport refrigerant between key components of the vehicle's climate control system. Engineered to Porsche's exact specifications for fit, durability and sealing performance, this refrigerant line ensures efficient refrigerant circulation and reliable operation of the air conditioning system. 

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18

Diagram Ref No 3

Manufactured from high-quality aluminium tubing and reinforced flexible hose sections where required, the line is designed to withstand the pressures, temperature fluctuations and vibration associated with modern automotive air conditioning systems. Precision-formed to match the original factory routing, it provides secure connections and leak-free operation throughout the refrigerant circuit.  

What This Product Does:

• Transfers refrigerant between air conditioning system components.
• Maintains correct refrigerant flow throughout the climate control system.
• Supports efficient heat transfer and cooling performance.
• Helps maintain correct operating pressures within the A/C circuit.
• Contributes to effective cabin temperature control.
• Ensures reliable operation of the air conditioning system.
• Provides secure, sealed connections between A/C components.
• Supports passenger comfort in all driving conditions.

Symptoms Of Wear Or Failure:

• Reduced air conditioning cooling performance.
• Warm air blowing from the dashboard vents.
• Refrigerant leaks from pipework or connection points.
• Oily residue around A/C fittings or hose connections.
• Frequent refrigerant recharge requirements.
• Air conditioning system pressure faults.
• Hissing noises caused by refrigerant escaping.
• Compressor cycling more frequently than normal.
• Climate control warning messages or fault codes.
• Visible corrosion, cracking or impact damage to the line.

Why Replacement Matters:

• Refrigerant lines operate under varying pressures and are continually exposed to vibration, heat, moisture, road debris and environmental contaminants. Over time, metal sections may corrode, hose sections can deteriorate and sealing surfaces may wear, resulting in refrigerant leaks and reduced system efficiency.
• A leaking refrigerant line can lead to a loss of refrigerant, reducing cooling performance and placing additional strain on the air conditioning compressor. Continued operation with insufficient refrigerant may accelerate wear of expensive climate control components and eventually lead to complete A/C system failure.
• Replacing a worn or damaged refrigerant line restores proper refrigerant circulation, maintains system pressure and ensures efficient climate control operation. A genuine Porsche replacement provides factory-correct fitment, dependable sealing and long-term durability, helping preserve the comfort, reliability and performance of your Porsche air conditioning system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B260701J

The product you are viewing cross references to these numbers

Refrigerant Line, Adapter. 
The Porsche Refrigerant Line Adapter is a genuine air conditioning system fitting designed to provide a secure connection between refrigerant lines and associated climate control components. Engineered to Porsche's exact specifications for fit, sealing performance and durability, this adapter plays a vital role in maintaining the integrity of the refrigerant circuit and ensuring efficient operation of the vehicle's air conditioning system.  

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
• Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18 

 
Diagram Ref No 5

Manufactured from high-quality corrosion-resistant materials, the adapter is designed to withstand the pressures, temperature variations and chemical exposure associated with modern refrigerant systems. It ensures a precise, leak-free connection between air conditioning components, helping maintain system pressure and cooling performance.  

What This Product Does:

• Connects refrigerant lines within the air conditioning system.
• Provides a secure, leak-free interface between A/C components.
• Maintains proper refrigerant flow throughout the system.
• Supports correct operating pressures within the climate control circuit.
• Helps ensure efficient air conditioning performance.
• Prevents refrigerant loss at connection points.
• Supports reliable operation of the A/C system.
• Contributes to long-term climate control system integrity.

Symptoms Of Wear Or Failure:

• Refrigerant leaks at connection points.
• Reduced air conditioning cooling performance.
• Warm air blowing from cabin vents.
• Oily residue around A/C fittings or pipe connections.
• Frequent refrigerant recharge requirements.
• Air conditioning system pressure faults.
• Hissing noises caused by escaping refrigerant.
• Climate control warning messages or fault codes.
• Corrosion or physical damage to the adapter body.
• Inability to maintain system pressure.

Why Replacement Matters:

• Refrigerant line adapters are subjected to constant pressure fluctuations, temperature changes, vibration and long-term exposure to refrigerant oils and environmental contaminants. Over time, sealing surfaces can wear, corrosion may develop and physical damage can compromise the adapter's ability to maintain a secure connection.
• A leaking or damaged adapter can allow refrigerant to escape, reducing cooling efficiency and forcing the air conditioning compressor to work harder than intended. Continued refrigerant loss can lead to reduced climate control performance, increased wear on A/C components and potentially expensive repairs.
• Replacing a worn or damaged refrigerant line adapter restores proper sealing, maintains refrigerant system pressure and helps ensure efficient climate control operation. A genuine Porsche replacement provides factory-correct fitment, dependable sealing performance and long-term durability, helping preserve the comfort, reliability and performance of your Porsche air conditioning system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B260367B

The product you are viewing cross references to these numbers

Refrigerant Line.
The Porsche Refrigerant Line is a genuine air conditioning system component designed to transport refrigerant between key elements of the vehicle's climate control system. Engineered to Porsche's exact specifications for fit, durability and performance, this refrigerant line plays a vital role in maintaining efficient refrigerant circulation and ensuring reliable air conditioning operation.  

Fits:

• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21 

 
Diagram Ref No 6

Manufactured from high-quality aluminium tubing and reinforced hose materials where required, the line is designed to withstand the pressures, temperature fluctuations and vibration associated with modern automotive A/C systems. Precision-formed to follow the original factory routing, it provides secure connections and leak-free performance throughout the refrigerant circuit.  

What This Product Does:

• Transfers refrigerant between air conditioning system components.
• Maintains correct refrigerant circulation throughout the A/C system.
• Supports efficient heat exchange within the climate control system.
• Helps maintain proper operating pressures.
• Contributes to effective cabin cooling performance.
• Ensures reliable operation of the air conditioning system.
• Provides secure, sealed connections within the refrigerant circuit.
• Supports passenger comfort in varying weather conditions.

Symptoms Of Wear Or Failure:

• Reduced air conditioning cooling performance.
• Warm air blowing from cabin vents.
• Refrigerant leaks from the line or fittings.
• Oily residue around hose connections or pipework.
• Frequent refrigerant recharge requirements.
• Air conditioning system pressure faults.
• Hissing noises caused by refrigerant escaping.
• Abnormal compressor cycling or operation.
• Climate control warning messages or fault codes.
• Visible corrosion, cracking or physical damage to the line.

Why Replacement Matters:

• Refrigerant lines operate in demanding conditions and are continually exposed to pressure fluctuations, vibration, temperature changes, road debris and environmental contaminants. Over time, seals can deteriorate, metal sections can corrode and flexible hose components may weaken, resulting in refrigerant leaks and reduced system efficiency.
• A leaking refrigerant line can cause a loss of refrigerant, reducing cooling performance and forcing the air conditioning compressor to work harder than intended. Continued operation with low refrigerant levels can accelerate wear of expensive A/C components and may eventually lead to complete climate control system failure.
• Replacing a worn or damaged refrigerant line restores proper refrigerant circulation, maintains system pressure and ensures efficient air conditioning performance. A genuine Porsche replacement provides factory-correct fitment, dependable sealing and long-term durability, helping maintain the comfort, reliability and refinement expected from your Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B260367J

The product you are viewing cross references to these numbers

Refrigerant Line, Pressure Line.
The Porsche Refrigerant Line, Pressure Line is a genuine air conditioning system component designed to transport high-pressure refrigerant between key elements of the vehicle's climate control system. Engineered to Porsche's exact specifications for fit, pressure resistance and durability, this pressure line is essential for maintaining efficient refrigerant circulation and ensuring optimum air conditioning performance.  

Fits:

• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21 

 
Diagram Ref No 4

Manufactured from high-quality aluminium tubing with reinforced hose sections where required, the pressure line is designed to withstand the demanding operating pressures, temperature fluctuations and vibration encountered within modern automotive A/C systems. Precision-formed to match the original factory routing, it provides secure, leak-free connections that help maintain system efficiency and long-term reliability.  

What This Product Does:

• Carries high-pressure refrigerant through the air conditioning system.
• Connects critical climate control components within the refrigerant circuit.
• Maintains correct refrigerant flow and operating pressure.
• Supports efficient heat transfer throughout the A/C system.
• Helps ensure consistent cabin cooling performance.
• Contributes to reliable climate control operation.
• Prevents refrigerant loss through secure sealed connections.
• Supports passenger comfort in all weather conditions.

Symptoms Of Wear Or Failure:

• Reduced air conditioning cooling performance.
• Warm air blowing from the dashboard vents.
• Refrigerant leaks from the line or connection points.
• Oily residue around A/C pipework or fittings.
• Frequent refrigerant recharge requirements.
• Air conditioning pressure-related fault codes.
• Hissing sounds caused by escaping refrigerant.
• Excessive compressor cycling or abnormal operation.
• Climate control warning messages.
• Visible corrosion, cracking or physical damage to the line.

Why Replacement Matters:

• Refrigerant pressure lines operate under high pressure and are continuously exposed to engine bay temperatures, vibration, moisture, road debris and environmental contaminants. Over time, seals can deteriorate, pipework can corrode and flexible hose sections may weaken, leading to refrigerant leaks and reduced system performance.
• A leaking pressure line can result in refrigerant loss, reducing cooling efficiency and forcing the air conditioning compressor to work harder. Continued operation with low refrigerant levels may accelerate wear of the compressor and other climate control components, potentially leading to costly repairs and reduced cabin comfort.
• Replacing a worn or damaged refrigerant pressure line restores proper refrigerant circulation, maintains system pressure and ensures efficient air conditioning operation. A genuine Porsche replacement guarantees factory-correct fitment, dependable sealing performance and long-term durability, helping preserve the comfort, reliability and performance of your Porsche climate control system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B260710J

The product you are viewing cross references to these numbers

Front Air Conditioning Pressure Line, Condenser.
The Porsche Front Air Conditioning Pressure Line, Condenser is a genuine climate control system component designed to transport high-pressure refrigerant between the condenser and other key air conditioning system components. Engineered to Porsche's exact specifications for fit, durability and performance, this pressure line plays a critical role in maintaining efficient refrigerant circulation and ensuring optimum air conditioning operation.

Fits:  

• Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
• Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
• Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
• Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
• Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
• Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
• Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
• Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
• Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
• Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
• Porsche Cayman 718 2.0L Manual (300 Bhp)
• Porsche Cayman 718 2.0L PDK (300 Bhp)
• Porsche Cayman S 718 2.5L Manual (350 Bhp)
• Porsche Cayman S 718 2.5L PDK (350 Bhp)
• Porsche Cayman T 718 2.0L Manual (300 Bhp)
• Porsche Cayman T 718 2.0L PDK (300 Bhp)
• Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
• Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
• Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
• Porsche Cayman GTS 718 4.0L PDK (400 Bhp)  

Diagram Ref No 7

Manufactured from high-quality aluminium tubing and reinforced hose sections, the pressure line is designed to withstand the high operating pressures, temperature fluctuations and vibrations present within modern automotive air conditioning systems. Precision-formed to follow the original factory routing, it provides secure, leak-free connections that help maintain system efficiency and reliability.  

What This Product Does:

• Transfers high-pressure refrigerant throughout the air conditioning system.
• Connects the condenser to associated A/C system components.
• Maintains correct refrigerant flow and operating pressure.
• Supports efficient heat exchange within the climate control system.
• Helps ensure consistent and effective cabin cooling.
• Contributes to reliable air conditioning performance.
• Prevents refrigerant loss through secure sealed connections.
• Supports passenger comfort in all driving conditions.

Symptoms Of Wear Or Failure:

• Reduced air conditioning cooling performance.
• Warm air blowing from cabin vents.
• Refrigerant leaks from pipework or fittings.
• Oily residue around A/C connections.
• Frequent refrigerant loss or repeated recharging requirements.
• Air conditioning system pressure-related fault codes.
• Hissing noises caused by escaping refrigerant.
• Compressor cycling excessively or operating abnormally.
• Climate control warning messages.
• Visible corrosion, cracking or physical damage to the line.

Why Replacement Matters:

• Air conditioning pressure lines operate under significant pressure and are continually exposed to vibration, road debris, moisture, temperature changes and environmental contaminants. Over time, seals can deteriorate, pipework can corrode and flexible hose sections may weaken, leading to refrigerant leaks and reduced system performance.
• A leaking pressure line can cause refrigerant loss, reducing cooling efficiency and forcing the air conditioning compressor to work harder than intended. Continued operation with insufficient refrigerant may accelerate wear of the compressor and other climate control components, potentially resulting in costly repairs.
• Replacing a worn or damaged front condenser pressure line restores proper refrigerant circulation, maintains system pressure and ensures efficient cooling performance. A genuine Porsche replacement provides factory-correct fitment, dependable sealing and long-term durability, helping maintain the comfort, reliability and performance of your Porsche air conditioning system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982260335D

The product you are viewing cross references to these numbers

Air Conditioning Front Pressure Line, Condenser.
The Porsche Air Conditioning Front Pressure Line, Condenser is a genuine climate control system component designed to carry high-pressure refrigerant between the air conditioning condenser and associated A/C system components. Engineered to Porsche's exact specifications for fit, pressure resistance and durability, this line plays a critical role in maintaining efficient refrigerant circulation and ensuring optimal air conditioning performance.  

Fits:

• Porsche Boxster 718 2.0L Manual (300 Bhp) 2017>>
• Porsche Boxster 718 2.0L PDK (300 Bhp) 2017>>
• Porsche Boxster S 718 2.5L Manual (350 Bhp) 05/2017>>
• Porsche Boxster S 718 2.5L PDK (350 Bhp) 05/2017>>
• Porsche Boxster T 718 2.0L Manual (300 Bhp) 01/2019>>
• Porsche Boxster T 718 2.0L PDK (300 Bhp) 01/2019>>
• Porsche Boxster GTS 718 2.5L Manual (365 Bhp) 05/2017>>
• Porsche Boxster GTS 718 2.5L PDK (365 Bhp) 05/2017>>
• Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
• Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
• Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
• Porsche Cayman 718 2.0L Manual (300 Bhp)
• Porsche Cayman 718 2.0L PDK (300 Bhp)
• Porsche Cayman S 718 2.5L Manual (350 Bhp)
• Porsche Cayman S 718 2.5L PDK (350 Bhp)
• Porsche Cayman T 718 2.0L Manual (300 Bhp)
• Porsche Cayman T 718 2.0L PDK (300 Bhp)
• Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
• Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
• Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
• Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
• Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L

  
Diagram Ref No 3

Manufactured from high-quality aluminium tubing and reinforced hose sections, the pressure line is designed to withstand the extreme pressures, temperature fluctuations and vibrations encountered within modern automotive air conditioning systems. Precision-formed to match the original factory routing, it provides secure, leak-free connections throughout the refrigerant circuit.  

What This Product Does:

• Transports high-pressure refrigerant through the air conditioning system.
• Connects the condenser to other key A/C system components.
• Maintains correct refrigerant flow and operating pressure.
• Supports efficient heat transfer within the climate control system.
• Helps ensure consistent cabin cooling performance.
• Contributes to reliable operation of the air conditioning system.
• Prevents refrigerant loss through secure sealed connections.
• Supports passenger comfort in all weather conditions.

Symptoms Of Wear Or Failure:

• Reduced air conditioning performance.
• Warm air blowing from cabin vents.
• Refrigerant leaks from pipework or fittings.
• Oily residue around A/C hose connections.
• Frequent loss of refrigerant charge.
• Air conditioning system pressure faults.
• Hissing sounds caused by refrigerant escaping.
• Compressor cycling more frequently than normal.
• Climate control warning messages or fault codes.
• Visible corrosion, cracking or impact damage to the line.

Why Replacement Matters:

• Air conditioning pressure lines operate under high pressures and are continually exposed to vibration, moisture, road debris, heat cycles and environmental contaminants. Over time, seals may deteriorate, pipework can corrode and hose sections may weaken, leading to refrigerant leaks and reduced system efficiency.
• A leaking pressure line can cause a gradual or complete loss of refrigerant, reducing cooling performance and forcing the air conditioning compressor to work harder. Continued operation with insufficient refrigerant can accelerate compressor wear and potentially lead to costly repairs throughout the climate control system.
• Replacing a worn or damaged front pressure line restores proper refrigerant circulation, maintains system pressure and ensures efficient cooling performance. A genuine Porsche replacement guarantees factory-correct fitment, dependable sealing and long-term durability, helping preserve the comfort, reliability and performance of your Porsche's air conditioning system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99157309407

The product you are viewing cross references to these numbers

LEFT Pressure Line, Condenser.
The Porsche Left Pressure Line, Condenser is a genuine air conditioning system component designed to transport high-pressure refrigerant between key elements of the vehicle's climate control system. Engineered to Porsche's exact specifications for fit, durability and performance, this pressure line forms an essential part of the refrigerant circuit, ensuring efficient cooling and reliable air conditioning operation.  

Fits:

• Porsche Boxster 981 2.7L 2012-16
• Porsche Boxster 981 S / GTS 3.4L 2012-16
• Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
• Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
• Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
• Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
• Porsche Cayman 2.7L 981 2013-16
• Porsche Cayman S / GTS 3.4L 981 2013-16 

 
Diagram Ref No 8

Manufactured from high-quality aluminium tubing and reinforced flexible hose sections, the pressure line is designed to withstand the high pressures and temperature variations associated with modern automotive air conditioning systems. Precision-formed to match the original routing, it provides a secure, leak-free connection between the condenser and associated A/C components.  

What This Product Does:

• Transfers high-pressure refrigerant through the air conditioning system.
• Connects the condenser to other A/C system components.
• Maintains proper refrigerant flow and system pressure.
• Supports efficient heat transfer within the climate control system.
• Helps ensure effective cabin cooling performance.
• Contributes to reliable operation of the air conditioning system.
• Maintains system efficiency and refrigerant containment.
• Supports passenger comfort in all driving conditions.

Symptoms Of Wear Or Failure:

• Reduced air conditioning cooling performance.
• Warm air blowing from cabin vents.
• Refrigerant leaks from the hose or fittings.
• Oily residue around A/C pipe connections.
• Air conditioning system pressure faults.
• Frequent loss of refrigerant charge.
• Hissing noises caused by refrigerant leakage.
• Air conditioning compressor cycling abnormally.
• Climate control warning messages or fault codes.
• Visible corrosion, cracks or physical damage to the line.

Why Replacement Matters:

• Air conditioning pressure lines operate under significant pressure and are exposed to vibration, temperature fluctuations, moisture, road debris and environmental contaminants. Over time, seals, hose sections and metal pipework can deteriorate, corrode or become damaged, resulting in refrigerant leaks and reduced system performance.
• A leaking pressure line can cause refrigerant loss, forcing the air conditioning compressor to work harder and potentially leading to premature wear of expensive A/C components. Reduced refrigerant levels also compromise cabin cooling performance and may eventually render the air conditioning system inoperative.
• Replacing a worn or damaged condenser pressure line restores proper refrigerant circulation, system pressure and cooling efficiency. A genuine Porsche replacement ensures factory-correct fitment, reliable sealing performance and long-term durability, helping maintain the comfort, efficiency and performance of your Porsche climate control system.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99157310502

The product you are viewing cross references to these numbers