Porsche

Oil Pressure Sender.

The Oil Pressure Sender is a genuine OEM Porsche engine monitoring component designed to measure engine oil pressure and transmit accurate pressure readings to the vehicle's engine management system and instrument cluster. As a critical part of the lubrication monitoring system, the oil pressure sender helps ensure that the engine maintains adequate oil pressure for proper lubrication, cooling, and protection of internal components.

Fits:

• Porsche 918 Spyder 4.6L 2014-15

Diagram Ref No 7

Manufactured to Porsche’s exact specifications, this sensor is engineered for precise pressure measurement, reliable signal transmission, and long-term durability in demanding engine environments. It continuously monitors oil pressure levels, allowing the driver and ECU to detect lubrication issues before they can cause serious engine damage.

What This Product Does:

• Measures engine oil pressure in real time
• Transmits oil pressure data to the ECU and dashboard
• Monitors lubrication system performance
• Triggers oil pressure warnings when pressure falls outside specification
• Helps protect critical engine components from lubrication failure
• Supports overall engine reliability and performance

Symptoms Of Wear Or Failure:

• Oil pressure warning light illuminated Erratic or fluctuating oil pressure readings
• Incorrect low oil pressure warnings
• Oil pressure gauge not functioning correctly
• Check engine light or related fault codes
• Oil leaks around the sender unit
• Intermittent sensor operation or signal loss
• False warnings despite normal oil pressure levels

Why Replacement Matters:

• Restores accurate oil pressure readings
• Ensures reliable warning system operation
• Helps detect genuine lubrication problems early
• Prevents false warning messages and unnecessary diagnostics
• Supports proper engine lubrication monitoring
• Protects internal engine components from damage caused by low oil pressure
• Maintains confidence in the vehicle’s engine management and monitoring systems
• Contributes to long-term engine reliability and performance

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A160620300

The product you are viewing cross references to these numbers

Boost Pressure Sensor.

The Boost Pressure Sensor is a high-precision engine management sensor designed to monitor boost pressure and intake manifold pressure within turbocharged and forced-induction engine systems. By continuously measuring air pressure and relaying real-time data to the engine control unit (ECU), the sensor enables accurate control of turbocharger operation, fuel delivery, ignition timing, and overall engine performance.

Fits:

• Porsche 971.1 Panamera 4S Diesel V8 4.0L 4WD (422 Hp) 2017-18
• Porsche 971.1 Panamera 4S Diesel 4.0L Twin-Turbo V8 Sport Turismo 2017-18

  
Diagram Ref No 27

Manufactured to OEM-quality standards, the pressure sensor is engineered for dependable operation in demanding engine environments, providing fast and accurate pressure readings under varying load and boost conditions. It plays a crucial role in maintaining engine efficiency, drivability, emissions compliance, and turbocharger reliability.

What This Product Does:

• Measures boost and intake manifold pressure within the engine system
• Sends pressure data to the ECU for engine management calculations
• Helps regulate turbocharger boost levels and performance
• Supports accurate fuel injection and ignition timing adjustments
• Optimises engine power, fuel economy, and emissions
• Protects the engine against incorrect boost pressure conditions

Symptoms Of Wear Or Failure:

• Loss of engine power or acceleration
• Turbocharger underboost or overboost conditions
• Poor throttle response and hesitation
• Check engine light illumination
• Engine entering limp-home mode
• Increased fuel consumption
• Erratic boost pressure readings
• Engine management fault codes related to boost pressure monitoring

Why Replacement Matters:

• Restores accurate boost pressure measurement and monitoring
• Ensures proper turbocharger operation and boost control
• Improves engine responsiveness and power delivery
• Supports fuel efficiency and emissions performance
• Prevents unnecessary stress on turbocharger and engine components
• Reduces the likelihood of limp mode activation and ECU faults
• Maintains reliable communication between the ECU and engine sensors
• Helps preserve long-term engine reliability and driving performance

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC906051D

The product you are viewing cross references to these numbers

Boost Pressure Sensor.

The Boost Pressure Sensor is a high-quality engine management component designed to monitor intake manifold and turbocharger boost pressure within the engine's forced induction system. The sensor continuously measures air pressure levels and transmits precise data to the engine control unit (ECU), enabling accurate control of turbocharger output, fuel injection, ignition timing, and overall engine performance.

Fits:

• Porsche Boxster GTS 718 4.0L Manual (400 Bhp) 01/2019>>
• Porsche Boxster GTS 718 4.0L PDK (400 Bhp) 01/2019>>
• Porsche Boxster Spyder / Spyder RS 718 4.0L 01/2019>>
• Porsche 992.1 Turbo 3.8L 2020-24
• Porsche 992.1 Turbo S 3.8L 2020-24
• Porsche 992.1 Turbo Cabriolet 3.8L 2020-24
• Porsche 992.1 Turbo S Cabriolet 3.8L 2020-24
• Porsche 992.2 Carrera 2 3.0L 2024>>
• Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
• Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
• Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
• Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
• Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
• Porsche 9YA Cayenne S V6 2.9L Petrol (440Hp) 2018-23
• Porsche 9YA Cayenne Coupe S V6 2.9L Petrol (440Hp) 2019-23
• Porsche 9YA Cayenne GTS V8 4.0L Petrol (460Hp) 2020-23
• Porsche 9YA Cayenne Coupe GTS V8 4.0L Petrol (460Hp) 2021-23
• Porsche 9YA Cayenne Turbo V8 4.0L Petrol (550Hp) 2020-23
• Porsche 9YA Cayenne Coupe Turbo V8 4.0L Petrol (550Hp) 2019-23
• Porsche 9YA.2 Cayenne V6 3.0L Petrol (353Hp) 2023>>
• Porsche 9YA.2 Cayenne Coupe V6 3.0L (353Hp) 2023>>
• Porsche 9YA.2 Cayenne S V8 4.0L Petrol (474Hp) 2023>>
• Porsche 9YA.2 Cayenne S Coupe V8 4.0L (474Hp) 2023>>
• Porsche 971.1 Panamera 4S 2.9L Twin-Turbo V6 Sport Turismo 2017-20
• Porsche 971.2 Panamera 2.9L V6 2021-23
• Porsche 971.2 Panamera 4 2.9L V6 2021-23
• Porsche 971.2 Panamera 4 Sport Turismo 2.9L V6 2021-23
• Porsche 971.2 Panamera 4S 2.9L V6 2021-23
• Porsche 971.2 Panamera 4S Sport Turismo 2.9L V6 2021-23
• Porsche 976 Panamera V6 2.9L 2023>>
• Porsche 976 Panamera 4 V6 2.9L 2023>>
• Porsche 95B.2 Macan Petrol 2.0L (245Bhp) 2019-21
• Porsche 95B.2 Macan S Petrol 3.0L V6 (354Bhp) 2019-21
• Porsche 95B.2 Macan GTS Petrol 2.9L V6 (380Bhp) 2019-21
• Porsche 95B.2 Macan Turbo 2.9L V6 (440Bhp) 2019-21 

 
Diagram Ref No 3

Manufactured to Porsche quality standards, the sensor is engineered to provide fast, accurate pressure readings in demanding engine environments. It plays a critical role in maintaining optimal turbocharger efficiency, engine responsiveness, fuel economy, and emissions compliance.

What This Product Does:

• Measures boost and intake manifold pressure in real time
• Sends pressure data to the engine control unit (ECU)
• Helps regulate turbocharger boost levels
• Supports accurate fuel injection and ignition timing adjustments
• Optimises engine performance, efficiency, and emissions
• Protects the engine from overboost or incorrect pressure conditions

Symptoms Of Wear Or Failure:

• Reduced engine power or acceleration
• Turbocharger underboost or overboost conditions
• Engine entering limp-home mode
• Check engine light illumination
• Poor throttle response Increased fuel consumption
• Erratic engine performance or hesitation
• Boost pressure-related fault codes stored in the ECU

Why Replacement Matters:

• Restores accurate boost pressure monitoring
• Ensures correct turbocharger operation and boost control
• Improves throttle response and engine performance
• Supports fuel efficiency and emissions compliance
• Prevents unnecessary strain on turbocharger and engine components
• Reduces the risk of limp mode activation and ECU faults
• Maintains reliable communication between the sensor and engine management system
• Helps preserve the performance, reliability, and driving characteristics of the vehicle

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC906051C

The product you are viewing cross references to these numbers

Injector.

The Injector is a high-precision fuel injection component designed to deliver a finely atomised spray of fuel directly into the engine’s intake tract or combustion chamber. As a critical part of the fuel injection system, the injector ensures the correct amount of fuel is supplied at the right time, promoting efficient combustion, optimal engine performance, fuel economy, and emissions control.
Sold Each.
x4 Required Per Car.

Fits:

• Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18

Diagram Ref No 28

Manufactured to OEM-quality standards, the injector is engineered for precise fuel metering, reliable operation, and compatibility with modern engine management systems. Built from high-quality materials and precision-machined components, it is designed to withstand fuel system pressures, temperature fluctuations, and continuous operating cycles.

What This Product Does:

• Delivers fuel into the engine in a controlled spray pattern
• Ensures precise fuel metering for efficient combustion
• Works with the engine management system to optimise performance
• Supports smooth engine operation and throttle response
• Helps maintain fuel economy and emissions compliance
• Provides consistent fuel delivery across all engine operating conditions

Symptoms Of Wear Or Failure:

• Engine misfires or rough running
• Poor fuel economy Hard starting or extended cranking
• Loss of power or sluggish acceleration
• Uneven idle or engine hesitation
• Increased exhaust emissions
• Fuel smell from the engine bay or exhaust
• Check engine light and injector-related fault codes

Why Replacement Matters:

• Restores proper fuel atomisation and delivery
• Improves engine performance and throttle response
• Helps reduce fuel consumption and emissions
• Eliminates misfires, hesitation, and rough idle conditions
• Protects the engine from lean or rich running conditions
• Maintains smooth and reliable engine operation
• Supports long-term fuel system and engine health
• Ensures the engine management system can operate as intended

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAC906031

The product you are viewing cross references to these numbers

Tandem Brake Master Cylinder.

The Tandem Brake Master Cylinder is a genuine OEM Porsche hydraulic braking system component responsible for converting brake pedal input into hydraulic pressure for the vehicle's dual-circuit braking system. Designed to operate both primary and secondary brake circuits independently, the tandem master cylinder is a critical safety component that ensures consistent braking performance and redundancy in the event of a circuit fault.

Fits:

• Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD 2018-20
• Porsche 971.1 Panamera 4 E-Hybrid V6 2.9L 4WD Executive 2018-20
• Porsche 971.1 Panamera 4 E-Hybrid 2.9L Twin-Turbo V6 Sport Turismo 2018-20
• Porsche 971.2 Panamera 4 E-Hybrid 2.9L V6 2021-23
• Porsche 971.2 Panamera 4 E-Hybrid Sport Turismo 2.9L V6 2021-23
• Porsche 971.2 Panamera 4S E-Hybrid 2.9L V6 2021-23
• Porsche 971.2 Panamera 4S E-Hybrid Sport Turismo 2.9L V6 2021-23

  
Diagram Ref No 3

Manufactured to Porsche’s exact specifications, this master cylinder delivers precise brake modulation, consistent pedal feel, and reliable hydraulic pressure distribution. It is engineered to integrate seamlessly with modern Porsche braking technologies, including ABS, Porsche Stability Management (PSM), and other driver assistance systems.

What This Product Does:

• Converts brake pedal force into hydraulic braking pressure
• Supplies pressure to separate front and rear brake circuits
• Provides consistent and responsive braking performance
• Supports ABS, PSM, and electronic braking systems
• Maintains balanced brake force distribution across the vehicle
• Ensures safe and reliable stopping power under all driving conditions

Symptoms Of Wear Or Failure:

• Soft, spongy, or inconsistent brake pedal feel
• Brake pedal slowly sinking when pressure is applied
• Reduced braking effectiveness or longer stopping distances
• Brake fluid leaks around the master cylinder
• Brake warning lights illuminated on the dashboard
• Uneven brake pressure between circuits
• Difficulty maintaining brake pressure during repeated braking
• Internal seal wear causing hydraulic pressure loss

Why Replacement Matters:

• Restores correct hydraulic brake pressure and performance
• Improves brake pedal feel and driver confidence
• Maintains safe operation of the dual-circuit braking system
• Supports proper functionality of ABS and stability systems
• Prevents brake fluid leaks and hydraulic pressure loss
• Reduces the risk of brake system failure
• Ensures predictable and consistent stopping performance
• Protects the integrity of the entire braking system and related components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971614019K

The product you are viewing cross references to these numbers

Tandem Brake Master Cylinder. 

The Tandem Brake Master Cylinder is a genuine OEM Porsche hydraulic braking system component designed to generate and distribute brake fluid pressure to the vehicle's dual-circuit braking system. As the primary hydraulic control unit, the tandem master cylinder converts brake pedal input into hydraulic pressure, supplying separate front and rear brake circuits for enhanced safety and braking reliability.

Fits:

• Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
• Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23

  
Diagram Ref No 2

Manufactured to Porsche’s exact specifications, this master cylinder is engineered for precise brake pedal feel, consistent hydraulic performance, and seamless integration with ABS, PSM, and other electronic braking systems. Constructed from high-quality corrosion-resistant materials and precision-machined internal components, it is designed to deliver long-term durability and dependable braking performance.

What This Product Does:

• Converts brake pedal force into hydraulic pressure
• Supplies brake fluid pressure to dual braking circuits
• Provides safe and reliable braking performance
• Supports ABS, stability control, and driver assistance systems
• Maintains consistent brake pedal feel and response
• Ensures balanced braking force distribution throughout the vehicle

Symptoms Of Wear Or Failure:

• Soft or spongy brake pedal feel
• Brake pedal slowly sinking to the floor
• Reduced braking performance
• Brake fluid leaks around the master cylinder
• Inconsistent brake pressure or braking response
• Brake warning lights appearing on the dashboard
• Difficulty maintaining braking force under repeated use
• Internal seal failure causing pressure loss between circuits

Why Replacement Matters:

• Restores correct hydraulic brake pressure
• Improves brake pedal feel and responsiveness
• Maintains safe operation of the dual-circuit braking system
• Supports proper ABS and stability control functionality
• Prevents brake fluid leakage and pressure loss
• Reduces the risk of braking system failure
• Ensures reliable and predictable stopping performance under all driving conditions
• Helps maintain the safety standards expected of Porsche braking systems

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y0614019

The product you are viewing cross references to these numbers

Synchro Brake Band 3rd / 4th / 5th gear
Genuine Porsche OE synchro brake band for 3rd, 4th and 5th gear on Porsche 911 models fitted with the 915 manual gearbox. This original Porsche gearbox synchroniser component is used inside the transmission to help control gear speed during gear changes, supporting smoother engagement and helping reduce gear clash or grinding.
3 per gearbox. *please note: these are 1/2 pieces so order 2 pcs to make one complete brake band

Fits:
Porsche 911 1974 - 1986 (915 Gearbox)

Diagram ref no 8.

The Genuine Porsche 91130231608 synchro brake band is an OE gearbox synchroniser component for 3rd, 4th and 5th gear in Porsche 911 models fitted with the 915 manual transmission. It helps control gear speed during shifting, supports smoother gear engagement and is commonly replaced during 915 gearbox rebuilds, synchro repairs or transmission restoration work.

This part fits inside the manual gearbox, within the synchroniser assembly for 3rd, 4th and 5th gears. It is not an external service item and requires gearbox disassembly for installation.

On the Porsche 915 gearbox diagram, this part is associated with the internal synchro / brake band assembly.

Functions
• Forms part of the gearbox synchroniser assembly
• Helps control and slow gear rotation during gear selection
• Supports smoother engagement of 3rd, 4th and 5th gears
• Helps reduce gear crunching, baulking or grinding during shifts
• Works with the synchro ring, dog teeth and slider components
• Helps restore correct synchroniser operation during gearbox rebuilds
• Maintains factory-correct Porsche transmission performance when fitted with matching OE gearbox components

Why Replace This Part?
The synchro brake band is a wear component inside the manual gearbox. Over time, repeated gear changes, high mileage, worn oil, aggressive shifting or previous gearbox wear can reduce its effectiveness. A worn brake band may no longer control gear speed correctly, which can lead to difficult shifting, gear crunching or poor synchroniser performance. Replacing the worn brake band with a Genuine Porsche OE synchro brake band helps restore correct synchroniser function and supports smooth, precise gear engagement in the 915 gearbox.

When to replace
•   During a Porsche 915 gearbox rebuild or overhaul
•   If 3rd, 4th or 5th gear engagement is difficult or notchy
•   If the gearbox crunches or grinds during gear changes
•   When replacing synchro rings, dog teeth or slider sleeves
•   If inspection shows wear, glazing, cracking or damage
•   When restoring the gearbox to original Porsche specification
•   As part of preventative maintenance during transmission disassembly.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91130231608

The product you are viewing cross references to these numbers

SECOND GRADE B-Pillar Trim Left Black Alcantara.
This is a second grade part which has slight scuff imperfections. This part is in good working order. Ideal for restoration specialists, collectors, or workshops looking for components at reduced cost.

Condition: 
This B-Pillar Trim Left Black Alcantara is a second grade part. It has some imperfections but in good / reusable working order.
Please see the gallery of images before purchasing.

Fits:

• Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
• Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
• Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
• Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
• Porsche 991.1 Turbo 3.8L (520 Bhp) 2014-16
• Porsche 991.1 Turbo S 3.8L (560 Bhp) 2014-16
• Porsche 991.1 R 4.0L (500 Bhp) 2016
• Porsche 991.1 GT3 3.8L (475 Bhp) 2014-16
• Porsche 991.1 GT3 RS 4.0L (500 Bhp) 2015-16
• Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
• Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
• Porsche 991.2 Turbo Coupe 3.8L (540 Bhp) 2016-19
• Porsche 991.2 Turbo S Coupe 3.8L (580 Bhp) 2016-19
• Porsche 991.2 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp) 2017-19
• Porsche 991.2 GT2 RS 3.8L PDK (700 bhp) 2018-19  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991555183102W0U

The product you are viewing cross references to these numbers

DAMAGED Side sill trim/skirt.
This is a damaged in transit part and has a broken clip, offered for parts or refurbishment purposes only. Ideal for restoration specialists, collectors, or workshops looking for components at reduced cost.

NOTE: For spares, repair, or core replacement only.

Condition: 
This Side sill trim/skirt is brand new and never been fitted. It has some transport damage which is repairable.
Please see the gallery of images before purchasing.

Fits:

• Porsche 996 C4S 3.6L 09/01-2005
• Porsche 996 TURBO 2000-05  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9965043630001C

The product you are viewing cross references to these numbers

Front Drop link Lock Nut, M12 x 1,5
This original Porsche locking nut fits on the front suspension assembly of the Porsche 970 Panamera. It is used at the front drop link / stabiliser link mounting point, where the anti-roll bar link is secured to the suspension component.
Sold individually, 4 required per vehicle

Fits:
Porsche 970.1 Panamera 2010 - 2013
Porsche 970.2 Panamera 2014 - 2016

Diagram ref no 5

This front drop link lock nut is ideal for replacing corroded, seized, damaged or previously removed hardware during front drop link, anti-roll bar or suspension repair work.

Functions
•  Secures the front drop link / stabiliser link connection
•  Provides a factory-correct M12 x 1.5 locking fastening point
•  Helps keep the front anti-roll bar link securely attached
•  Supports correct front suspension and anti-roll bar operation
•  Helps reduce unwanted movement, knocking or looseness in the drop link area
•  Resists loosening caused by road vibration and suspension movement
•  Maintains OE Porsche fitment, thread size and fastening quality.

Drop link lock nuts are exposed to road dirt, water, salt and suspension movement. Over time, the nut can corrode, seize, round off or lose its locking function. Because it secures part of the front anti-roll bar system, it should be replaced if damaged or when removed during drop link replacement. Using a Genuine Porsche OE lock nut helps ensure the front drop link is fastened correctly and safely to Porsche factory standards.

When to replace:
•   When replacing a front drop link / stabiliser link
•   When removing or refitting the front anti-roll bar link connection
•   If the original nut is corroded, seized or damaged
•   If the nut thread is worn or the locking function is compromised
•   During front suspension repair or overhaul
•   If there is knocking, looseness or movement around the drop link fixing
•   When restoring the suspension with correct OE Porsche hardware.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99908444909

The product you are viewing cross references to these numbers

Control Arm Lock Nut - Arm to Wheel Carrier,  M12 x 1,5
This genuine Porsche locking nut is designed to provide the correct factory fitment at control arm mounting points where a secure M12 x 1.5 nut is required. It secures the control arm to the wheel carrier on select Porsche 911, Boxster, Cayman and Panamera models.
Sold individually, Quantity required depends on the vehicle model.

Fits:
Porsche 993 1995 - 1998  (Front & Rear)
Porsche 996 1998 - 2005  (Front & Rear)
Porsche 996 Turbo 2000 - 2005  (Front & Rear)
Porsche 996 GT3 1999 - 2005 (Rear)
Porsche 997.1 2005 - 2008  (Front & Rear)
Porsche 997.2 2009 - 2012  (Front & Rear)
Porsche 997 Turbo 2007 - 2013  (Front & Rear)
Porsche 997 GT3  (Front & Rear)
Porsche 991.1 2012 - 2016 (Front)
Porsche 991.2 2017 - 2019 (Front)
Porsche 991 Turbo 2014 - 2020 (Front)
Porsche 991 GT3 (Front)
Porsche Boxster 986 1997 - 2004 (Front)
Porsche Boxster 987.1 2005 - 2008  (Front & Rear)
Porsche Boxster 987.2 2009 - 2012  (Front & Rear)
Porsche Boxster 981 2012 - 2016  (Front & Rear)
Porsche Boxster 982 (718) 2017 >> (Front)
Porsche Cayman 987C.1 2005 - 2008  (Front & Rear)
Porsche Cayman 987C.2 2009 - 2012  (Front & Rear)
Porsche Cayman 981C 2012 - 2016  (Front & Rear)
Porsche Cayman 981C GT4 2016 (Front)
Porsche Cayman 982C (718C) 2017 >> (Front)

Diagram ref no 22 (Front)
Diagram ref no 14 (Rear)

This lock nut fits in the suspension assembly, at the control arm to wheel carrier mounting point. Depending on the model, it may be used on front or rear suspension arm connections where Porsche specifies an M12 x 1.5 locking nut.

Functions
•  Secures the control arm to the wheel carrier
•  Provides a factory-correct M12 x 1.5 locking fastening point
•  Helps maintain suspension arm stability and alignment
•  Prevents loosening caused by road vibration and suspension movement
•  Supports correct suspension geometry and wheel control
•  Helps ensure safe and secure mounting of chassis components
•  Provides OE Porsche fitment, thread size and fastening quality.

Control arm lock nuts are exposed to road dirt, moisture, corrosion and high suspension loads. Over time, the nut can corrode, seize, round off or lose its locking ability. Because this fastener secures a critical suspension joint, it is good practice to replace it whenever the control arm is removed or replaced.

Using a Genuine Porsche OE lock nut helps ensure the control arm is correctly secured to the wheel carrier and maintains the factory-standard suspension assembly.

When to replace
•  When replacing a control arm, wishbone or coffin arm
•  When removing or refitting the arm-to-wheel-carrier joint
•  If the original nut is corroded, seized or damaged
•  If the thread is worn or the locking function is compromised
•  During suspension overhaul or chassis repair work
•  After accident repair or wheel carrier replacement
•  When restoring the suspension with correct OE Porsche hardware.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99908444909

The product you are viewing cross references to these numbers

O-ring seal for Joining socket for water pump housing, 28.00 x 4.50 mm
The Genuine Porsche 99970741140 O-ring seal is an OE replacement sealing ring for the joining socket on the water pump housing. It helps seal the coolant connection, maintain cooling system pressure and prevent leaks on selected Porsche 996 and 997 models. Ideal for use during water pump, thermostat, coolant flange or joining socket repairs.
Sold individually, 4 required per vehicle

Fits:
Porsche 996 Turbo 2001 - 2005
Porsche 996 GT3 2000 - 2005
Porsche 997 Turbo / GT2 2007 - 2009
Porsche 997 GT2 RS 2011
Porsche 997 GT3 2007 - 2011

Diagram ref no 18

This O-ring fits in the engine cooling system, at the joining socket / coolant inlet flange connection for the water pump housing. It is positioned in the rear engine area where the coolant pipework connects to the water pump housing assembly.

Functions:
•  Seals the joining socket connection at the water pump housing
•  Helps prevent coolant leaks from the water pump housing area
•  Maintains correct cooling system pressure
•  Supports reliable coolant flow through the engine cooling circuit
•  Helps protect surrounding engine components from coolant seepage
•  Provides an OE-quality replacement seal for Porsche cooling system repairs
•  Ensures correct fitment when refitting the joining socket, water pump housing or related coolant flange

O-ring seals can harden, flatten, crack or perish over time due to heat cycles, coolant exposure and engine vibration. Once the seal loses its elasticity, coolant can begin to seep or leak from the joining socket or water pump housing area. Replacing the O-ring with a Genuine Porsche OE seal helps restore the correct sealing performance and reduces the risk of coolant loss, pressure drop or overheating issues. It is also good practice to replace this seal whenever the joining socket or water pump housing is removed.

When to replace
•  When coolant is leaking from the water pump housing or joining socket area
•  During water pump, thermostat or coolant flange replacement
•  When the joining socket is removed or refitted
•  If the original O-ring is flattened, brittle, swollen or cracked
•  During engine cooling system repairs or restoration work
•  When carrying out preventative maintenance on older Porsche Turbo or GT3 models
•  If the cooling system is losing pressure or showing signs of seepage

Where it fits on the car
This O-ring fits in the engine cooling system at the water pump housing area. On the diagram, it is shown as item number 18, sealing the coolant pipe/joining socket connection. It works with the adjoining coolant pipe fittings and sealing components to keep the water pump housing connection leak-free.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970741140

The product you are viewing cross references to these numbers

Fillister Head Screw, M6 x 10
This is a Genuine Porsche fillister head screw / oval-head screw / fillister head bolt, size M6 x 10. It is used as a factory fastening screw within the turbocharger pipework area, including water line, oil line, pressure line and suction line mounting points.
Sold individually

Fits:
Porsche 997 Turbo 2007 - 2013
Porsche 991 Turbo 2014 - 2020
Porsche 992 Turbo 2020 - 2025

Diagram ref no 16 - for 997 models
Diagram ref no 8 - for 991 models
Diagram ref no 12 - for 992 models

This is an original Porsche OE fixing screw, previously supplied under part number 9990732360A and now replaced by the newer Porsche part number PAF008313.

This part is commonly associated with turbocharged Porsche 911 models and turbocharger pipework diagrams. Always check compatibility using the vehicle VIN, model year and Porsche parts catalogue before ordering.

This screw is fitted in the engine/turbocharger area, where it is used to secure associated pipework and line brackets around the exhaust gas turbocharger assembly.

It may be used with:
•  Turbocharger water line fixings
•  Turbocharger pressure line fixings
•  Turbocharger suction line fixings
•  Turbocharger oil/coolant pipe support points
•  Related exhaust gas turbocharger mounting hardware

Exact position can vary depending on model, engine type and turbocharger layout.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PAF008313

The product you are viewing cross references to these numbers

Water coolant bottom hose
The Porsche Genuine OE Water Coolant Bottom Hose (Part No. 95510605100) is an original factory lower radiator coolant hose designed specifically for the Porsche 955 Cayenne 3.2L V6. This hose forms an essential part of the engine cooling system, carrying coolant between the radiator and engine to maintain stable operating temperatures and efficient heat transfer. Manufactured to Porsche OE specifications, it ensures precise fitment, durability, and reliable coolant circulation.

Fits:
Porsche 955 Cayenne 3.2L V6 2003 - 2006

Diagram ref no 1

The bottom coolant hose transfers cooled coolant from the radiator back into the engine cooling circuit. This continuous coolant flow helps regulate engine temperature and prevents overheating during normal driving and high-load conditions.

Designed to withstand heat, pressure, and engine movement, the hose provides a secure and leak-free connection within the Porsche Cayenne cooling system

Functions & Technical Role
•  Coolant circulation: Transfers coolant between radiator and engine
•  Temperature regulation: Supports stable engine operating temperatures
•  Pressure resistance: Designed for high-pressure cooling systems
•  Leak prevention: OE moulded hose construction ensures proper sealing
•  OEM precision: Manufactured to Porsche factory specifications for exact fitment and reliability

Fitment / Position on Car
•  Fitting position: Lower radiator hose
•  Location: Between radiator and engine cooling system
•  System: Engine cooling / coolant circulation system

The lower radiator hose is constantly exposed to heat, coolant pressure, and engine movement. Over time, hoses can harden, crack, or swell, leading to coolant leaks and reduced cooling efficiency.

When to replace
•  Coolant leaks or seepage
•  Cracked, swollen, or brittle hose material
•  Cooling system pressure loss
•  During radiator or cooling system overhaul
•  Signs of overheating or coolant smell

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95510605100

The product you are viewing cross references to these numbers

Rear Engine Lid Damper
The Porsche Genuine OE Rear Engine Lid Damper (Part No. 99751255191) is an original factory gas-filled support strut / gas pressure damper designed for the rear engine lid assembly on high-performance Porsche 997 GT models.
1 required per vehicle

Fits:
Porsche 997.1 GT3 RS 2007 - 2013 (PR:004)
Porsche 997.2 GT2  2010 - 2013

Diagram ref no 4

The rear engine lid damper assists with lifting and supporting the engine cover while keeping it securely open during servicing or inspection.

The gas-filled design counterbalances the weight of the GT rear lid and spoiler assembly, ensuring controlled opening and preventing the lid from dropping unexpectedly. This is especially important on GT and RS models fitted with larger aerodynamic rear wings.

Functions & Technical Role
•  Engine lid support: Assists lifting and holding the rear lid open
•  Gas pressure operation: Provides smooth and controlled movement
•  GT spoiler support: Designed for heavier GT and RS rear deck lids
•  Service accessibility: Improves safe access to the engine compartment
•  OEM precision: Manufactured to Porsche factory specifications for exact fitment and durability

Fitment / Position on Car
•  Fitting position: Rear
•  Location: Rear engine lid / rear deck lid assembly
•  System: Rear lid lifting and support mechanism
•  Typically fitted: Between the chassis mounting point and engine lid hinge assembly

The rear engine lid damper supports the heavy GT rear spoiler assembly and prevents sudden closing of the engine lid. A weak or failed damper can make the lid difficult to open and unsafe to hold in position.

When to Replace:
•  Rear lid no longer stays open
•  Weak or uneven lifting force
•  Oil leakage from the gas strut
•  Difficulty opening the engine cover
•  During rear lid or spoiler restoration work

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751255191

The product you are viewing cross references to these numbers

Sun visor - LEFT, Black.

Fits:
For cars WITHOUT interior light package
Porsche 981 Boxster 2012 - 2014 - LHD and RHD Cars
Porsche 981 Boxster 2014 - 2016 - LHD  Cars
Porsche 982 (718) Boxster 2017>> LHD Cars
Porsche 981 Boxster Spyder 2016 - LHD  cars



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982857551AHOX7

The product you are viewing cross references to these numbers