do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
OE Match for Porsche
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations
A Quick Look at OE Match
OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
- Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
- Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
- Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
- Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
- For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.
Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.
Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.
- For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
- On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.
Explore OE Match at Design911
View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Includes :
- 6 x Differential Housing Lock Plate. (90133228501)
- 12 x Hexagon-head bolt (92833227606)
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Porsche 924 1976-85
Click 'Zoom in' for large parts diagram.
Diagram ref no 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133228501
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 914 (1970-1976)
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Porsche 924 1976-85
Click 'Zoom in' for large parts diagram.
Diagram ref no 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133228501
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 914 (1970-1976)
The Rear Anti-Roll Rod Link Bushing (Upper / Lower) is a high-quality suspension bushing set designed to restore correct fitment and controlled movement at the rear stabilizer (anti-roll/sway) bar link mounting points on compatible Porsche models. These bushings fit at the upper and lower ends of the rear anti-roll rod link, providing a cushioned connection between the stabilizer bar system and the rear suspension components.
Sold Each.
x4 Required Per Car.
Fits:
- Porsche 95B.1 Macan Petrol 2.0L 237Bhp 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 258Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
Fits On To Diagram Ref No 5
Rear anti-roll link bushings play an important role in maintaining stable handling by allowing the stabilizer bar to transfer forces between the left and right suspension, helping reduce body roll and improve balance during cornering. Over time, bushings can harden, crack, or deform due to age, road conditions, and repeated suspension loads. Worn bushings may cause knocking noises over bumps, increased vibration, and reduced rear-end stability.
What This Product Does:
- Provide cushioned, pivoting mounts for the rear anti-roll bar links
- Allow controlled movement of the sway bar under load
- Reduce body roll during cornering
- Improve rear suspension stability and balance
- Dampen noise and vibration transmitted into the cabin
Symptoms Of A Worn Or Failed Bushing:
Noise & Vibration
- Clunking, knocking, or rattling noises from the rear suspension
- Buzzing or vibration felt over rough surfaces
Handling & Stability Issues
- Noticeable body lean in corners
- Loose or vague rear handling feel
- Reduced confidence in directional stability
Wear Patterns
- Uneven or accelerated rear tyre wear
- Inconsistent alignment readings
- Play detected at sway bar links during inspection
Physical Signs
- Cracks, splits, or visible deterioration of the bushing material
- Excessively hardened or deformed rubber/elastomer
Why Replacement Matters:
- New bushings allow the sway bar links to operate correctly, reducing body roll and improving balance in turns and quick direction changes.
- Fresh bushings absorb vibration and reduce noise more effectively than old ones, leading to a more refined ride.
- Replacing worn bushings eliminates knocking and rattling caused by excessive play in the sway bar link connections.
- Properly functioning bushings reduce stress on link joints and other suspension parts, helping prevent premature wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95B505465A
The product you are viewing cross references to these numbers
- Porsche 95B.1 Macan Petrol 2.0L (237Bhp) 2014-18
- Porsche 95B.1 Macan S Petrol 3.0L V6 (340Bhp) 2014-18
- Porsche 95B.1 Macan S Diesel 3.0L V6 (258Bhp) 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 (360Bhp) 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 (400Bhp) 2014-18
Shop Securely
12 Month Warranty
Worldwide Delivery
Differential rebuild kit for Porsche 911 1987–1989 G50 gearbox cars by OE Match, suitable for selected 911 3.2 G50 and 3.3 Turbo (930) models.
What This Product Does This kit provides the core components typically required to overhaul the rear differential assembly on G50-equipped Porsche 911 models, helping restore correct internal clearances and consistent operation of the unit.
Kit includes:
1 x Differential outer bearing, (Ref: 99905906400)
1 x Taper roller bearing. (Ref: 99905902702)
6 x Differential Housing Lock Plate. (Ref: 90133228501)
12 x Hexagon-head bolt (Ref: 92833227606)
Functions
- Supports refurbishment of worn differential internals
- Helps re-establish correct bearing support and gear contact
- Assists in reducing internal play and backlash when set up correctly
- Provides parts needed for a planned diff rebuild alongside other drivetrain work
Symptoms of Fault
- Whining or howling noises from the rear at cruise or on overrun
- Clunks when taking up drive or during gear changes
- Noticeable backlash or “thud” in the driveline
- Oil leaks from differential side seals or input area
- Vibration or roughness that changes with road speed
- Reduced or inconsistent traction on cars with limited-slip units
Why Replacement Matters
Over time, bearings, shims and internal hardware in the rear differential wear, especially on older Porsche 911 models that see mixed road use and age-related degradation. Refreshing these parts during a rebuild helps stabilise gear alignment, supports smooth torque transfer and can prevent accelerated wear of crownwheel, pinion and bearings. For G50 cars in particular, maintaining a healthy differential complements the robust gearbox design and contributes to a more predictable, refined drivetrain.
Fits
- Porsche 911 & 912 (1965–1989) – selected models with G50 gearbox
- Porsche 911 1987–1989 3.2L G50
- Porsche 911 1978–1989 3.3L Turbo (930) – applicable versions with G50 transmission
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99905906400
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
The Upper Front Control Arm Bushing (Front / Rear) is a high-quality suspension bushing set designed to restore correct mounting and controlled movement of the upper front control arm on compatible Porsche models, commonly within the Cayenne 958 platform range. These bushings fit at the control arm mounting points and provide a stable yet flexible connection between the suspension arm and the chassis/subframe.
Sold Each.
x4 Required Per Car.
Fits:
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Fits On To Diagram Ref No 15
Upper control arm bushings play an important role in maintaining front suspension geometry and alignment, helping deliver stable steering response, smooth ride comfort, and predictable handling under braking, acceleration, and cornering loads. Over time, bushings can harden, crack, or deform due to age, heat, and constant suspension movement. Worn bushings may cause clunking noises, increased vibration, steering instability, and uneven tyre wear.
What This Product Does:
- Secure the upper control arm to the vehicle’s chassis or subframe
- Absorb vibration and road shock before it reaches the cabin
- Allow controlled articulation of the suspension
- Help maintain correct suspension geometry and alignment
- Reduce noise, harshness, and vibration (NVH) from suspension movement
Symptoms Of A Worn Or Failed Bushing:
Handling & Stability Changes
- Loose, sloppy steering feel
- Slight drift or pull during acceleration/braking
- Reduced responsiveness through corners
- Rear or front alignment that won’t hold
Noise & Comfort Issues
- Clunking or knocking noises when accelerating, braking, or driving over bumps
- Front suspension noise during turns
- Increased vibration felt in the cabin
Wear / Physical Indicators
- Visible cracks, splits, or deformation in the bushing material
- Excessive play when the control arm is manipulated
- Hardened, flat, or collapsed rubber/elastomer
Why Replacement Matters:
- Fresh bushings maintain correct suspension geometry and improve steering feedback by keeping the upper control arm securely positioned.
- New bushings absorb vibration and reduce harshness more effectively than old, hardened ones—delivering a smoother ride.
- Replacing worn bushings eliminates clunking and rattling caused by excessive play in the suspension mount.
- A stable upper control arm reduces stress on ball joints, lower arms, and other suspension links, preventing premature wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95834105100A
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
Direct-fit upgraded replacement for the rear flex disc (guibo) on AWD Porsche 996 Carrera 4, 4S and Turbo models. OEM cross-reference PCG42102001. Rubber body with metal bushings to isolate driveline vibration while transmitting torque smoothly. Perfect when your original guibo shows age, cracking, or causes driveline vibration/clunks.
Compatible for:
- · Porsche 996 C4 3.4L 1997-08/01
- · Porsche 996 C4 3.6L 09/01-2005
- · Porsche 996 C4S 3.6L 09/01-2005
- · Porsche 996 TURBO 2000-05
- · Porsche 996 GT2 2001-05
- · Porsche 997 MK1 Carrera 2 3.6L 2005-08
- · Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- · Porsche 997 MK1 Carrera 4 3.6L 2005-08
- · Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- · Porsche 997 MK1 TURBO 2007-09
- · Porsche 997 MKII Turbo 2010-13
Why you should replace the flex disc
- Worn rubber = vibration & driveline shock. The flex disc isolates rotational forces, as the rubber hardens, cracks or tears, it transmits vibration and can produce shuddering at idle/low speeds or a clunk during acceleration. Owners commonly report these symptoms before a failure.
- Prevents secondary damage. A failed flex disc can allow excessive play between the driveshaft and transmission flange, stressing flange bolts, the driveshaft and the transmission output — leading to far more expensive repairs.
- Affordable, quick fix vs replacing the whole shaft. Replacing this single part is significantly cheaper than replacing the full cardan/driveshaft assembly and restores NVH and drivability.
Common issues / failure signs
- Noticeable vibration through the car (often at certain speeds or under acceleration).
- Clunking or knocking from the center/rear when accelerating from low speed or shifting — typically caused by lost rubber compliance or torn bores.
- Visible cracking, chunks missing, or separation of the rubber around the bolt bores (inspect visually with the car safely supported). Micro-cracks can quickly grow into failure.
- Corroded or stretched mounting hardware — always inspect/replace bolts and washers when servicing the guibo.
Fits to No 8 , 9, 13 on the diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99642101000
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MKII Turbo 2010-13
The Rear Beam Bushing (Front Left / Right, Insert) is a high-quality suspension bushing insert set designed to restore correct mounting and vibration isolation at the front left and front right mounting points of the rear axle beam / rear crossmember on compatible Porsche models. These inserts fit into the front positions of the rear beam bushing housings, providing a stable yet cushioned connection between the rear beam assembly and the vehicle’s chassis.
Sold Each.
x2 Required Per Car.
Fits:
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Fits On To Diagram Ref No 2
Rear beam bushing inserts play an important role in reducing noise and vibration while helping maintain correct rear suspension geometry under load. Over time, the bushing material can harden, crack, or deform due to age, heat, and constant suspension movement. Worn inserts may cause clunking noises, increased harshness, rear-end instability, and uneven tyre wear caused by alignment changes.
What This Product Does:
- Provide damped support between the rear axle beam and the vehicle’s body/chassis
- Help absorb vibration and road harshness before it reaches the cabin
- Ensure consistent rear suspension geometry under load
- Reduce noise and vibration from rear suspension movement
- Support stable rear handling and ride comfort
Symptoms Of A Worn Or Failed Rear Beam Bushing Insert:
Noise & Comfort Issues
- Clunking, knocking, or thudding noises from the rear suspension
- Increased vibration felt through the floor or rear seats
- Buzzing or vibration at certain speeds
Handling & Stability Changes
- Rear end instability or “wandering” feel at higher speeds
- Poor response in rear handling during turns
- Uneven tyre wear due to alignment variation
Wear / Physical Signs
- Visible hardening, cracking, or splitting of the bushing material
- Excessive movement at the rear beam connection when inspected
- Flat, deformed, or deteriorated rubber/elastomer inserts
Why Replacement Matters:
- New inserts absorb vibration and road shock better than old, hardened bushings — leading to a smoother and quieter ride.
- Properly functioning bushings help keep the rear axle beam aligned, preserving handling balance and tyre contact.
- Replacing worn inserts eliminates clunking and vibration caused by excessive movement in the rear beam mount.
- A solid rear beam connection reduces stress on differential mounts, trailing arms, and other suspension links.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97033125704A
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 955 Cayenne 3.2L 2003-06 (D9J Engines)
Porsche 955 Cayenne 4.5L S / Turbo 2003-06 (T90 / T91 Engines)
Porsche 957 Cayenne 3.6L 2007-10
Porsche 957 Cayenne 3.0L DIESEL 2007-10
Click 'Zoom in' for large parts diagram.
Diagram ref no. 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95510614723
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
Fits:
Cars with 8-speed automatic gearbox, for four-wheel drive, mechatronic with software
Porsche 9YA Cayenne 05/2017>> Gearbox A2901
Porsche 9YA Cayenne S 05/2017>> Gearbox A3001
Cars with 8-speed automatic gearbox, For vehicles with
hybrid drive, mechatronic with software
Porsche 9YA Cayenne Hybrid 05/2017>> Gearbox A30P1
Porsche 9YA Cayenne Hybrid 05/2017>> Gearbox A20P1
*Porsche currently list two part numbers for this product. This sump has twelve mounting points - you will need to check your existing sump is the same in order to ensure compatibility. If your existing sump has thirteen mounting points, you will need to use PAB39804703 instead.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PAB398009
The product you are viewing cross references to these numbers
- Porsche 9YA Cayenne V6 3.0L Petrol (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe V6 3.0L Petrol (340Hp) 2019-23
- Porsche 9YA Cayenne E-Hybrid V6 3.0L V6 (340Hp) 2018-23
- Porsche 9YA Cayenne Coupe E-Hybrid V6 3.0L (340Hp) 2020-23
- Porsche 9YA Cayenne S V6 2.9L Petrol (440Hp) 2018-23
- Porsche 9YA Cayenne Coupe S V6 2.9L Petrol (440Hp) 2019-23
This is a full suspension anti-roll bar link replacement kit featuring four OE Match drop links for the front and rear suspension of the Porsche 911 964, includes:
1x Front Left Drop Link - OE ref no 96434307101
1x Front Right Drop Link - OE ref no 96434307201
1x Rear Left Drop Link - OE ref no 96433307371
1x Rear Right Drop Link - OE ref no 96433307402
Fits:
Porsche 964 1990 - 1994 all models
Diagram ref no 18.
This product is a set of four OE Match anti-roll bar drop links - two for the front and two for the rear - that connect each stabiliser (anti-roll) bar to their respective suspension arms on the 911 (964). Drop links play a crucial role in the vehicle’s suspension dynamics by transferring lateral loads during cornering and reducing body roll.
The links in this kit ensure the anti-roll bars can effectively resist body roll by transferring forces between the bar and suspension arms. This enhances stability, grip, and handling precision:
• Front drop links (96434307101 & 96434307201): Connect the front stabiliser bar to the front suspension
• Rear drop links (96433307371 & 96433307402): Connect the rear stabiliser bar to the rear suspension
By replacing both front and rear links with OE Match units, you help restore balanced roll resistance across all four corners of the vehicle.
Function:
• Transmits stabiliser bar forces into the suspension arms
• Reduces body roll during cornering
• Improves handling balance and steering precision
• Helps maintain tyre contact and grip
• Supports stable, predictable suspension behaviour at speed
Anti-roll bar drop links endure constant movement, loads, and heat from everyday driving and spirited use. Over time, their joints and bushings can wear or loosen, resulting in:
• Clunking or knocking noises over bumps
• Increased body roll during cornering
• Loose or vague steering feel
• Uneven tyre wear
• Compromised suspension balance.
Replacing both front and rear drop links with a matched OE Match set restores correct stabiliser bar function, helps maintain predictable handling, and provides a more stable and confident driving experience.
When to replace. Install this complete drop link set when:
• You hear suspension noise from either front or rear end
• Handling feels loose or unsettled
• The vehicle exhibits excessive body lean
• You are performing a complete suspension overhaul or alignment
• The original links show visible wear, play, or deterioration
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
DROPLINKKIT.964
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
OE Match rear stabiliser bar (anti-roll bar) link set for the Porsche 911 (964) rear suspension. The set includes both left and right rear drop links - OE ref no 96433307371 and 96433307402 - engineered to match the original Porsche components in fit, strength, and function.
SET OF 2 links - for left and right side.
Fits:
Porsche 964 1990 - 1994 all models
Diagram ref no 18.
This product is a pair of OE Match rear drop links - also referred to as rear stabiliser bar links - designed to connect the rear anti-roll bar to the rear suspension arms on the Porsche 911 964.
The kit includes:
• 1x 96433307371 - OE Match rear drop link (one side)
• 1x 96433307402 - OE Match rear drop link (opposite side).
OE Match parts are manufactured to reflect the original dimensions, pivot geometry, and bushing/ball joint specifications so the links install without modification and deliver dependable performance over time.
Rear drop links are pivotal in transmitting forces between the rear anti-roll bar and suspension arms. During cornering, the anti-roll bar resists body roll by sharing load across both sides of the rear suspension. The drop links serve as the connection points that deliver those forces effectively - helping keep the vehicle balanced, stable, and predictable. By facilitating this transfer, the drop links contribute to:
• Reduced body roll on cornering
• Sharper handling and chassis response
• Improved rear wheel contact and grip
• Better stability at speed and under load.
Function:
• Connects stabiliser bar to suspension arms: Ensures anti-roll bar forces are applied correctly
• Reduces body motion: Limiting excessive rear end roll for improved balance
• Improves grip: Promotes consistent tyre contact and traction
• Enhances confidence: More predictable handling in everyday and spirited driving
Rear drop links bear constant loads and movement as the suspension articulates. Over time, the ball joints and bushings in the links can wear or loosen, leading to:
• Clunking or knocking noises from the rear during suspension movement
• Increased body roll and reduced stability in corners
• Loose or vague handling characteristics
• Uneven tyre wear from inconsistent suspension geometry
Replacing both rear drop links at the same time - rather than just one - restores balanced roll control and preserves consistent handling. OE Match parts ensure both sides match the original design for controlled, reliable performance.
When to replace. Install this rear drop link set when:
• You hear noise from the rear suspension under motion
• Handling feels loose, unsettled, or floaty
• You experience excessive body roll in corners
• The links show visible wear or play during inspection
• You’re performing other rear suspension service or upgrades
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96433307X71
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
OE Match complete front anti-roll bar (stabiliser bar) drop link set for Porsche 911 964 C2 and 965 Turbo models. It includes both the left (OE ref no 96434307101) and right (OE ref no 96434307201) front drop links, engineered to match the original Porsche factory parts in fit and function.
SET OF 2 links - for left and right side.
Fits:
Porsche 964 C2 1990 - 1994
Porsche 965 Turbo 1991 - 1994
This product supersedes Porsche's old part numbers:
- 96434307100 (LEFT) / 96434307200 (RIGHT)
Diagram ref no 7
This product is a two-piece OE Match front drop link set used to connect the front stabiliser (anti-roll) bar to the front suspension components on Porsche 911 964 models.
It includes:
• 1x 96434307101 – Left front drop link
• 1x 96434307201 – Right front drop link
OE Match components are precisely engineered to replicate the original Porsche part’s dimensions, joint positioning, and load-bearing characteristics. This makes them a reliable replacement for worn or aging original drop links and restores consistent handling performance.
The front drop links attach the front anti-roll bar to the suspension’s lower control arms or uprights. When the vehicle corners, the stabiliser bar transfers force across the axle. The drop links serve as the connection points that transmit this energy, helping to resist body roll, improve balance, and maintain tyre contact during dynamic driving. Without effective drop links, the anti-roll bar cannot properly stabilise the chassis, which can lead to excessive body lean, vague steering response, and uneven tyre loading.
Function:
• Connects stabiliser bar to suspension: Transfers lateral forces into the chassis
• Reduces body roll: Helps keep the car flat through corners
• Improves handling balance: Enhances steering precision and road stability
• Absorbs movement and vibration: Provides smooth linkage motion through bushings/ball joints
Over time, front drop links can wear from exposure to road shock, heat, and damp conditions. Worn or failing drop links can cause:
• Clunking or knocking noises over bumps
• Loose or “floaty” cornering feel
• Increased body lean and reduced stability
• Uneven tyre wear
• Less precise steering response
Replacing both drop links together restores the intended anti-roll bar performance, improves handling response, and prevents premature wear on other suspension components. OE Match links ensure both sides are renewed to the same specification for balanced performance.
When to replace. Install this drop link set when:
• You hear suspension noise (clunks/knocks) from the front end
• Handling feels less stable or predictable during cornering
• You notice excessive body roll
• The original links show visible wear or play
• You are undertaking front suspension service or rebuild
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
96434307X01
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
The Rear Stabilizer Bar Bush (24.70mm) is a high-quality suspension bushing designed to securely mount and support the rear anti-roll (stabilizer/sway) bar on compatible Porsche models, commonly within the Cayenne 955 / 957 platform range. With a 24.70mm internal diameter, this bushing is sized to match the correct stabilizer bar thickness, ensuring proper fitment and stable operation.
Sold In Halves - x4 Required Per Car.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Diagram Ref No 2
Rear stabilizer bar bushes play an important role in reducing body roll during cornering by keeping the anti-roll bar firmly mounted while allowing controlled movement. They also help absorb vibration and isolate road noise for improved ride comfort. Over time, these bushes can harden, crack, or deform due to age, heat, and constant suspension movement, leading to knocking noises over bumps, increased body roll, and reduced handling precision.
What This Product Does:
- Secure the rear stabilizer bar to the vehicle’s subframe/chassis
- Allow controlled movement of the bar while absorbing road shock
- Reduce body lean in corners for greater handling stability
- Minimise noise, vibration, and harshness (NVH) transmitted to the cabin
- Help maintain proper suspension geometry and grip
Symptoms Of Wear Or Failure:
Noise & Harshness
- Clunking or knocking noises from the rear suspension over bumps
- Rattling under acceleration or cornering
- Squeaks at low speeds
Handling Issues
- Noticeable body roll when cornering
- Reduced rear stability at higher speeds
- Loose or vague rear handling feedback
Wear Patterns
- Uneven or accelerated tyre wear
- Difficulty maintaining alignment
- Bushes that appear cracked, split, or deformed during inspection
Why Replacement Matters:
Restore Handling Precision
New bushes keep the stabilizer bar tightly mounted, improving cornering response and rear grip.
Improve Ride Comfort
Fresh bushes absorb vibration and isolate NVH better than old, hardened ones.
Eliminate Unwanted Noise
Replacing degraded bushes reduces clunking and suspension noises.
Protect Suspension Components
Correctly functioning bushes reduce stress on related links and mounts, preventing premature wear.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95533379230
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Shop Securely
12 Month Warranty
Worldwide Delivery
Fits:
Porsche 955 Cayenne 2003-06 (I0AB)
Porsche 957 Cayenne 2007-10 (I0AB)
Porsche 958 Cayenne 2011>> (I0AB/I0AC)
Click 'Zoom in' for large parts diagram.
Diagram ref no 2, 5, 6, 7
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534306900
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
.jpg?width=197&height=148&format=webp "Front Anti-Roll Bar Link Bushing (UPPER / LOWER). Porsche 955 / 957 / 958 Cayenne 2003-17 - 95534306900, 7L0411317 - TED10693")
The Front Anti-Roll Bar Link Bushing (Upper / Lower) is a high-quality suspension bushing set designed to restore correct fitment and controlled movement at the front stabilizer (anti-roll/sway) bar link mounting points on compatible Porsche models, commonly within the Cayenne 955 / 957 / 958 platform range. These bushings sit at the upper and lower ends of the anti-roll bar link, providing a cushioned connection between the stabilizer bar and the suspension components.
Sold Each.
x4 Required Per Car.
Fits:
Porsche 955 Cayenne 3.2L V6 2003-06
Porsche 955 Cayenne S 4.5L V8 2003-06
Porsche 955 Cayenne Turbo 4.5L 2003-06
Porsche 955 Cayenne Turbo S 4.5L 2006>>
Porsche 957 Cayenne 3.0L Diesel 2007-10
Porsche 957 Cayenne 3.6L 2007-10
Porsche 957 Cayenne S/GTS 4.8L 2007-10
Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
Porsche 958 Cayenne V6 3.0L Diesel 245HP 2010-17
Porsche 958 Cayenne S V6 3.0L Hybrid 380HP 2010-17
Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
Porsche 958 Cayenne S V8 4.2L Diesel 382HP 2010-17
Porsche 958 Cayenne GTS V8 4.8L Petrol 400HP 2010-17
Porsche 958 Cayenne Turbo V8 4.8L Petrol 500HP 2010-17
Porsche 958 Cayenne Turbo S V8 4.8L Petrol 550HP 2010-17
Fits On To Diagram Ref No 5
Anti-roll bar link bushings play an important role in maintaining stable handling by allowing the stabilizer bar to transfer forces between the left and right suspension, helping reduce body roll during cornering. Over time, bushings can harden, crack, or deform due to age, road conditions, and repeated suspension load. Worn bushings may cause knocking noises over bumps, increased vibration, and reduced handling precision.
What This Product Does:
- Provide a cushioned mounting point for anti-roll bar links
- Help the anti-roll bar transfer forces between left and right suspension
- Reduce body roll in corners, improving stability and handling
- Isolate road noise and vibration from the cabin
- Maintain correct front suspension geometry under load
Symptoms Of A Worn Or Failed Bush:
Noise & Comfort Issues
- Clunking or knocking noises over bumps or during steering
- Rattling from the front suspension area
- Buzzing or vibration through the dash/floor
Handling & Stability Changes
- Increased body lean in corners
- Loose or sloppy steering feel
- Reduced confidence in quick direction changes
Wear/Visual Indicators
- Visible cracks, splits, or deformation in the bushing material
- Excessive movement at the sway bar link ends when tested
- Bushings that appear flattened, hard, or deteriorated
Why Replacement Matters:
- New anti-roll bar link bushings keep the sway bar tightly connected to the suspension, helping reduce body roll and improve front-end grip and balance.
- Worn bushings transmit more impact and vibration into the cabin; new ones isolate noise and improve smoothness.
- Clunking and rattling caused by worn or loose bushings are resolved with proper OE-match replacements.
- Loose anti-roll bar links can place unnatural loads on control arms, ball joints, and mounting points, leading to premature wear of more expensive components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534306900A
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
- Porsche 957 Cayenne 3.0L Diesel 2007-10
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S / GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
- Porsche 958 Cayenne V6 3.6L Petrol (300Hp) 2010-17
- Porsche 958 Cayenne V6 3.0L Diesel (245Hp) 2010-17
- Porsche 958 Cayenne S V6 3.0L Hybrid (380Hp) 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne S V8 4.2L Diesel (382Hp) 2010-17
- Porsche 958 Cayenne GTS V8 4.8L Petrol (400Hp) 2010-17
- Porsche 958 Cayenne Turbo V8 4.8L Petrol (500Hp) 2010-17
- Porsche 958 Cayenne Turbo S V8 4.8L Petrol (550Hp) 2010-17
Shop Securely
12 Month Warranty
Worldwide Delivery
.jpg){kind=link}
PACK OF 10
Fits in Various models
Fits:
Porsche 986 Boxster 1997-2004
Porsche 996 C2 / C4 1998-05
Porsche 996 GT3 MKI
Porsche 996 GT3 MKII
Porsche 996 GT3 RS
Porsche 996 GT3 MKII
Porsche 997
Porsche Boxster 987
Click picture for large parts diagram.
Diagram Ref No 18.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99970743441
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005-08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-12
- Porsche Boxster S 987 MKII 3.4L 2009-12
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MK1 TURBO 2007-09
- Porsche 997 MK1 GT3 / GT3 RS 2007-09
- Porsche 997 MK1 GT2 2007-09
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
- Porsche 997 MKII GT3 / GT3 RS 2010-11
- Porsche 997 MKII Turbo 2010-13
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed