Motor Sport Parts
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Note
Longer ring gear bolts may be required
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
** This requires machining to the front "nose cone" housing.
We have updated our 915 spray bar kit to include an improved oil return port that will not interfere with the torsion bar tube and allows for better routing of the oil return line.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Precision machined from 4130 Chromoly
Better supports both main and pinion shaft bearings
Improved design captures the main shaft bearing 45% more than OEM
Substantial clearance provided for even non-standard tall 1st gear ratios
Perfect fit for bearings and assembly
Much stronger than the original cast part
Replaces part 901.301.251.01 tensioning plate
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90130125101
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Bearing retaining plate for 915 transmissions
Fits:
Porsche 911 '72-'86 (Not for 4-speed gearboxes)
- Precision machined
- Better support for both the main and pinion shaft bearings
- Improved design incorporates an oil groove promoting more lubrication to the input shaft bearings
- Substantial clearances for ease of assembly
- Perfect fit for bearings and assembly
- Much stronger than the original cast two piece design
Replaces parts 915 302 121 03 and 915 302 123 03
Notes:
Do not use the factory lock washers.
For use only with the 4mm flange 4 point pinion bearing 999.052.030.00
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91530212303
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Precision machined
Improved design incorporates an oil groove promoting more lubrication to the input shaft bearings (some modification required to bell housing and shims)
Substantial clearances for ease of assembly
Perfect fit for bearings and assembly
Much stronger than the original cast part
Replaces part 930.302.121.00
Note: Do not use the factory lock washers in conjunction with our supplied hardware.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93030212100
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Our custom "coarse spline/18 spline" drive flanges will allow 930 or G50 CV joints (with metal grease caps) to bolt up to the early 1969-75 911s and all 914 transaxles.
Shaft length was designed with the stock open diff in mind. If by off-chance you have a factory LSD, spacers will be required.
Sold in pairs.
Fits
Porsche 911 - 1969 to 1975
Porsche 914
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CMS.914.18T
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
For all 930 4 speed applications and 1978 and later 915.
Spacers are required if you are using with a factory LSD.
Replaces part 930-332-209-12
Sold in pairs.
Notes:
Factory LSD applications will require spacers, otherwise the flanges will be too short.
Designed for use with metal CV gaskets, not paper.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033223200
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Our current version uses hardware to reattach the new bosses rather than welding making future replacement much easier. This is the cleanest repair in the industry.
Uses the current version pivot shaft and fork assembly.
For all G50, G64, 993, 996T/997T, 996/997 GT2/GT3 transmissions.
G50, G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01, G50/20, G50/21, G50/31, G50/32, G50/33, G64/51, G64/52, G96/50, G96/88, G96/90, G96/92, G96/96, G96/97, G95/50, G97/88, G97/96
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9XXGFIX
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
Fits:
Porsche 911 2.7 RS / RSR Race car
For 915 race (5 speed) gearbox
Click 'Zoom in' for large parts diagram.
This item replaces diagram ref no 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9153073032R
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Our design features a replaceable steel threaded insert for the bolt in the event the threads should ever strip.
Fits all Porsche 915 transaxles 72-86
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91530311301
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Precision machined from aircraft grade billet aluminium to exacting standards for perfect fit and function
Oil passageway for standard taper roller bearing
Replaceable clutch cable bracket
Uses rubber o-ring instead of paper gasket (part 113.301.185a included)
Uses standard differential taper roller bearing 999.059.027.00
Note: The cover is thicker than the original and therefore requires longer studs to be installed. We include a new set.
Replaces part 901.301.311.01
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90130131101
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
While some models are machined from the factory, some will need additional machine work. This is a great solution for a G50 car with low ground clearance that needs an oil cooler.
Machined in house from 6061 billet aluminum
Nicely beveled edges; high attention to detail
VDO 300F temp sender included
-8AN adapter included
Mounting hardware included
For all G50's '87-'98 except C4 5 speed
Not for inverted/mid engine gearboxes
G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/20, G50/21, G50/31, G50/32, G50/33, G64/51, G64/52
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95030137100
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Precision machined from T6 aluminum
Superior in strength as compared to all OEM side plates
Uses larger 930 Turbo differential taper bearing (999.059.064.00 sold separately)
Oil passageway for additional lubrication to the diff bearing
Perfect fit/no clearance issues
Adds strength and reliability to the diff section by reducing ring gear deflection
Perfect for racing and V8 applications
Fits all 915 transmissions '72-'86 excluding Euro models with oil cooler
Replaces parts 915.301.311.00, 915.301.311.04, 915.301.311.05, 915.302.311.06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91530131105
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Ours is beautifully pocketed and even allows for use of the OEM speed sensor and bracket.
For use with the standard studs, o-ring, axle seal and differential bearing.
Fits G50/00, G50/01, G50/02
Replaces part 950.301.312.04
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95030131204
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
Our version uses the larger 930 turbo taper bearing and features a replaceable clutch cable bracket.
You must use differential bearing 999.059.064.00
You can use the stock studs, axle seal, o-ring and factory preload setting.
Fits Porsche 911 70-71 side cover with clutch cable bracket for pull clutch
Replaces part: 901.301.311.12
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90130131112
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Under load there can be a tremendous force applied to this cover, and it can break, sometimes resulting in a damaged ring and pinion-or worse.
Upgrading to a billet side plate will add significant strength and increased reliability to the differential section.
Our design features include:
A ring gear thrust bolt to reduce ring gear deflection under load
Ports that can be used for an oil cooling system
Cross drilled oil passageways for the differential bearing
Comes with (3) 3/4 - 16 O ring plugs.
Replaces part 930.301.311.02
930/30, 930/33, 930/34, 930/36, 930/37, 930/67
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93030131102
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Includes clutch arm, cable clevis, slave cylinder, spacer, seals and our billet slave cylinder bracket with bolts. This requires the use of the 1978 and earlier clutch fork pivot shaft.
Note: This requires a portion of the rib on the bottom of the transmission that holds the original clutch cable to be cut away on 72-77 models. To go back to a cable configuration if one so chooses can be done with a bolt on bracket.
A 3/4" clutch master cylinder is recommended - not included.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95011623712
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Includes clutch arm, cable clevis, slave cylinder and our billet slave cylinder bracket with bolts. Please specify if your application is using a short bell housing or long bell housing transaxle as the pivot shafts for the release fork are different. We must modify the arm if you have a long bell housing transmission.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95011623714
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Genuine Porsche bearings are recommended
Fits 911/912 64-69.5 aluminium case 901 transmissions.
90130122100, 901-301-221-00
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90130122100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Features:
Proper knock off tabs/pry points for easy removal
300F VDO temp sender included
-8AN oil scavenge port (-8AN adapter included)
Uses your existing fork, studs and dowel pins
Uses stock paper gasket
Fits all Porsche 915 and 930 transmissions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91530302302
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Our newly designed fork is CNC machined beautifully from aircraft grade billet aluminium and offers the most strength over any fork in the aftermarket. Our fork will also promote enhanced lubrication to 2nd gear as it better captures the idler gear when engaged.
Fits all G50 5 speed Porsche transmissions '87-'94.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01)
Replaces part 95030311101
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95030311101
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Machined from 6061 T6 aluminium; features a replaceable threaded insert for the supplied bolt.
Fits all Porsche 915 transaxles 72-86 and 930 4 speed transaxles 76-88.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91530311100
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Replacing factory part numbers 915.302.112.00 and 930.303.112.02 our part is made in house from 6061 T6 aluminum - and incorporates replaceable grade 10 hardware in the event the threads should strip.
Fits all 915 transmissions '72-'86 and all 930 transmissions '76-'88.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91530211200
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
The cast steel RS fork does not have this issue but it's not a billet steel one like ours...and it's less expensive.
Fits all G50 5 speed transmissions '87-'94 and all G50 6 speed transmissions '95-'98 including C4, RS, Turbo and RSR models.
(G50/00, G50/01, G50/50, G50/03, G50/04, G50/05, G50/52, G64/00, G64/01, G50/20, G50/21, G50/31, G50/31, G50/33, G64/51, G64/52)
Replaces part 950.303.113.04, 950.303.103.00, 950.303.113.04, 950.303.103.06
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95030311304
The product you are viewing cross references to these numbers
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 911 F (1972 to 1973) and
Porsche 911 G (1974 to 1986) that are equipped with a 915 transmission (excluding Turbo)
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91530311301
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
Fits:
Porsche 924 1978-1979 Only for 5-speed transmission
Porsche 911 G Turbo 1975-88 Only for 4-speed transmission
Click 'Zoom in' for large parts diagram.
Diagram ref no 21
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93030212101
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
The update is a also good repair for those whom have loose, damaged or worn out guide tubes.
** This requires machining to fit
The original is machined off and a custom steel tube is fitted. It's further retained from the inside of the diff case with a high quality snap ring and sealed with the factory o-ring.
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Clutch Kits
- Clutch Kits - High Performance
- Clutch Friction Plate
- Clutch Pressure Plate
- Clutch Release Bearings
- Clutch Cables & Parts
- Clutch Guide Tube
- Clutch Ring Gear
- Clutch Forks & Levers
- Clutch Bolts
- Driveshafts & Parts
- Gearbox Parts
- Gasket Sets / Gaskets / Seals / Lock Nuts
- Gearbox Mounts
- Gearshift Control Parts
- Flywheel / Torque
- CV Joints Kits
- CV Boots and Kits
- Gearbox Oil
- Gearbox Sump / Oil Pan
- Rear Differential
- Sportomatic
- Sensors
- Transmission Cooling