Direct-to-Head Throttle Bodies
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Porsche 911E, T and S 1969 to 1973 (2.2 and 2.4 Ltr) engines.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Aerospace Grade Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Aluminium Inlets/Extensions are suitable for duck or whale tail models.
• Aluminium Ram Pipes.
• Throttle Position Sensors (TPS) Mounting Kits.
• Billet Aluminium Fuel Rails.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Available in 18 anodised colour options.
• Available with 39mm Inlet Ports.
Installation Kit:
• Emerald3D-K6 ECU including base map package, complete with full electrical engine harness/ Trigger Wheel & Fan Pulley Assembly, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off kit for brake boost an/or Idle Air Control (IAC) assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - for interior (Cabin) heating.
• Rain Guard Kit for protection against rain water ingress.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00088-01
Parts are in silver. The contents of these kits may vary, from the images provided
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Porsche 911E, T and S 1969 to 1973 (2.2 and 2.4 Ltr) engines.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Aerospace Grade Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Aluminium Inlets/Extensions are suitable for duck or whale tail models.
• Aluminium Ram Pipes.
• Throttle Position Sensors (TPS) Mounting Kits.
• Billet Aluminium Fuel Rails.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Available in 18 anodised colour options.
• Available with 39mm Inlet Ports.
Installation Kit:
• GPA ECU including base map package, complete with full electrical engine harness/ Trigger Wheel & Fan Pulley Assembly, hardware, and software.
• Fueling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off kit for brake boost an/or Idle Air Control (IAC) assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - for interior (Cabin) heating.
• Rain Guard Kit for protection against rain water ingress.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00088-01
Parts are in silver. The contents of these kits may vary, from the images provided
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Our unique patented technology helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Aerospace Grade Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Aluminium Inlets/Extensions are suitable for duck or whale tail models.
• Aluminium Ram Pipes.
• Throttle Position Sensor (TPS) choices calibrated to the options available from the AT Power range. .
• Billet Aluminium Fuel Rails.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
The owner of his 911E was totally lost for words on the difference these throttles and performance kits have made to how his car now drives. It starts without fail, it feels much faster, better acceleration between the gears, it looks incredible under the engine lid and sounds amazing.
This product fits
Porsche 911E, T and S 1969 to 1973 (2.2 and 2.4 Ltr) engines.
The throttles will be supplied in silver
The contents of these kits may vary, from the images provided you will need an EFI Installation & control kit which is not included
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00088-01
you will need an EFI Installation & control kit which is not included
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
102-102-00237-01
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Gaskets & Sets
- Radial Seal / RMS / Camshaft / Balance shaft
- Intermediate shaft (IMS)
- Oil System Parts
- Fuel System Parts
- Belts / Tensioners / Rollers
- Chains & Tensioners
- Timing covers and gaskets
- Engine Bearings / Shells
- Engine Valves / Guides / Springs
- Rocker Arms & Tappets
- Engine Bolts / Studs
- Piston Rings
- Engine Cylinders / Liners / Pistons
- Connecting Rod
- Cylinder Head / Camshaft Carrier
- Camshaft covers / Gaskets
- Camshafts
- Camshaft gears / sprockets and fixings
- Crankcase Parts
- Crankshaft & Parts
- Engine Tinware
- Engine Mounts
- Turbo Chargers / Intercoolers & Parts
- Air Intake & Injection
- Carburetors & Parts
- PMO Carburetors
- Jenvey Throttle Bodies
- Specialist Tools