Drop Links & Bushes REAR
Front and Rear axles
Fits:
Porsche 911- 1987 to 1989 - G50 gearbox
Suspension bush rebuild kit using standard shore rating (not uprated)
- Porsche 911 1987-1989 3.2L G50
for Porsche 911 G SC Stabilizer rear axle UNIBALL
Replacement for 93033307100, 93033307101, 93033307200, 93033307201
Fits:
Porsche 911 G 1978 - 1989
ONLY for the following engine codes:
911.83 / 930.09 / 930.10 / 930.19 / 930.20 / 930.21 / 930.25 / 930.26 / 930.60 / 930.66
Advantages:
• More direct response of the stabilizer
• Higher overall stiffness of the chassis
• Corrosion protection due to electrogalvanizing
• Lifetime lubrication due to brass plain bearings.
• Adjustable against each other to adjust wheel loads.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1161
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
1 kit required per car
Fits
Porsche 911 - 1978 to 1989
Porsche 911 turbo - 1978 to 1989
Upgrade your factory rear swaybar (anti roll bar) with our adjustable drop links.
These attach to the camber adjustment holes on the spring plates.
Teflon-lined precision rod ends for added durability and increased articulation.
Fully weather-sealed to extend bearing life
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2271002
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1978-89
Porsche 930 Turbo 3.3L 1978-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 12.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033307
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1978-89
Porsche 930 Turbo 3.3L 1978-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 12.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033307
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1978-89
Porsche 930 Turbo 3.3L 1978-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 12.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033307
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
1 kit required per car
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Front and Rear QuickChange™ Blade Style Sway Bar System
Blade style adjustable sway bar (anti roll bar) system is the ultimate choice for performance and tuning. This superior-quality system delivers unique features and advantages that are without rival. It is simply the best.The blade style adjuster mechanism varies roll stiffness with the angle of the blade. Set it vertically for full-stiff, horizontal for full-soft, and intermediate angles for other stiffness levels.
Blade style adjustment offers advantages over traditional adjustable sway bars including faster adjustment and superior geometry.
The rear sway bars fit 66mm bolt spacing on the sway bar mounts as equipped on 1978-1989 911 cars. 1965-1977 cars can be upgraded to the later 66mm type mounts
Perfect Geometry
Fixed-length arms ensure the angle of the drop links are not changed with stiffness adjustment. Geometry and kinematic behavior is always perfect. The bar always rotates freely, with low-friction, and without binding in all adjustment positions.
Traditional sway bars adjust roll stiffness by changing the length of the lever arm, at the same time changing the angle of the drop link. This can cause poor force-transmission angles in some positions. The result can be binding, high-friction, and excessive load on the mounts to the chassis.
Lightweight
Hollow bar reduces weight.
Fast and Easy Adjustment
No need to jack up the car or remove the wheels. Reach under the car, loosen one bolt to rotate the blade type adjuster. The angle of the blade defines the stiffness.
Literally about 1 minute to adjust, faster with practice.Infinitely variable adjustment lets you dial in the precise roll stiffness.
For track cars this fast-adjustment can be invaluable when time in the pits or paddock is short. Adjusting traditional sway bars is a lengthy process – jack up car, remove wheels, adjust, re-install wheels.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
227002
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1978-89
Click 'Zoom in' for large parts diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG01015630
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 928 1978-86
Click 'Zoom in' for large parts diagram.
Diagram ref no 18 (for 911) / no 24 (for 964) / no 19 (for 928)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90008203502
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Fits:
Porsche 911 1978-89
Porsche 964 1989-94
Porsche 928 1978-86
Click 'Zoom in' for large parts diagram.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90008203502
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
SET OF 2 Left & Right
SPORT variant with +30% increased rubber hardness from the OE 93033307101 & 93033307201
Fits:
Porsche 911 - 1978 to 1989
Porsche 930 Turbo 3.3ltr - 1978 to 89
Anti-Roll Bar Drop Links using stiffer bushes aimed at Performance and track driving.
Click 'Zoom in' for large parts diagram.
Diagram ref no 12.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93033307101+201
The product you are viewing cross references to these numbers
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1977 to 1989
Porsche 912 - 1966 to 1976
Porsche 914 - 1970 to 1976
Retro RSR Adjustable Sway Bar System
Retro appearance combined with modern performance and features make these adjustable sway bars (anti roll bar) a great choice for period-correct builds.
Drop links
Appearance similar to the RSR originals with a grey colour for a discreet and retro appearance. Left and right threaded precision rod ends make easy work of adjusting front drop link length. Adjustable length makes it easy to eliminate any preload on the bar. Teflon lined rod ends never require lubrication.
Lightweight
Hollow bars weigh half as much as similar solid bars delivering equal stiffness..
Bushings
Teflon impregnated bushings are grease and maintenance free and provide smooth operation and long life.
Through-body style front bar
Installs through the body same as the pre-1974 cars and the early turbo cars. Cars not originally equipped with a through-body sway bar should purchase the optional backer plate kit.
Retro-Look Arms
Steel arms are similar to the original RSR type and have drilled adjustment positions.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1-RSRRSBA
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Anti Roll Bar
- Anti Roll Bar Bushes
- Anti Roll Bar Bracket
- Ball Joints
- Drop Links & Bushes FRONT
- Shock Absorbers FRONT
- Shock Absorber Parts FRONT
- Shock Absorbers REAR
- Shock Absorber Parts REAR
- Track Control Arms FRONT
- Track Control Arm REAR
- Wheel Bearings & Kits
- Wishbones & bushes
- Torsion Bar
- Spring Plate
- Rear Trailing Arm
- Cross Member & Parts
- Wheel Hub / Carrier
- SuperPro Polyurethane Bushes
- Powerflex Heritage Collection
- Powerflex Black Series Bushes
- Powerflex Polyurethane Bushes