Carburetors & Parts
Set of 2 kits
For installation in:
Porsche 911 F (1965 - 1971) ONLY with Weber 40 carburettor
Porsche 914/6 (1970 - 1972)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG10894800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Porsche 911E, T and S 1969 to 1973 (2.2 and 2.4 Ltr) engines.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Aerospace Grade Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Aluminium Inlets/Extensions are suitable for duck or whale tail models.
• Aluminium Ram Pipes.
• Throttle Position Sensors (TPS) Mounting Kits.
• Billet Aluminium Fuel Rails.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Available in 18 anodised colour options.
• Available with 39mm Inlet Ports.
Installation Kit:
• Emerald3D-K6 ECU including base map package, complete with full electrical engine harness/ Trigger Wheel & Fan Pulley Assembly, hardware, and software.
• Fuelling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off kit for brake boost an/or Idle Air Control (IAC) assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - for interior (Cabin) heating.
• Rain Guard Kit for protection against rain water ingress.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00088-01
Parts are in silver. The contents of these kits may vary, from the images provided
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Patented technology that helps to increase air flow dramatically thus minimising air flow separation and reduces turbulence, resulting in higher volumetric efficiency.
This pristine technology with Knife-edged butterflies has improved inlet airflow and performance significantly. With the individual Throttle blades very close to the inlet valves, the engine and Throttle response are vastly improved. Along with this, we have also found an impressive increase in Horsepower, Torque, Driveability, and an incredible mechanical soundtrack.
Porsche 911E, T and S 1969 to 1973 (2.2 and 2.4 Ltr) engines.
Throttle Bodies come fully assembled and ready to bolt directly to the Cylinder Heads, with the following parts included:
• Aerospace Grade Billet Aluminium "Shaft-less" Individual Throttle Bodies.
• Aluminium Inlets/Extensions are suitable for duck or whale tail models.
• Aluminium Ram Pipes.
• Throttle Position Sensors (TPS) Mounting Kits.
• Billet Aluminium Fuel Rails.
• Thermal Insulation Gaskets.
• Throttle Linkage System which connects directly to the existing OEM cable pick-ups.
• Available in 18 anodised colour options.
• Available with 39mm Inlet Ports.
Installation Kit:
• GPA ECU including base map package, complete with full electrical engine harness/ Trigger Wheel & Fan Pulley Assembly, hardware, and software.
• Fueling System - Includes Fuel pressure regulator with gauge, Fuel Lines, fittings, and hoses to interface with existing fuel system
• Vacuum System - Includes vacuum take-off kit for brake boost an/or Idle Air Control (IAC) assembly, c/w interfacing pipework for cold start engine idle control & brake boost assist.
• Engine Oil breather system - Includes all filters and interfacing components required.
• Heater duct system - for interior (Cabin) heating.
• Rain Guard Kit for protection against rain water ingress.
**please note
Race Mesh Ram Pipe Installation Kit is not included
this is extra product code 102-101-00088-01
Parts are in silver. The contents of these kits may vary, from the images provided
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
VW Porsche 1.7/1.8/2.0 2 x Weber IDF kit.
Fits Porsche 914/4 and VW T3/T4
Superior quality Weber performance kit featuring
2 x Authentic Spanish 44IDF Weber carburettors
2 x superior quality intake manifolds
2 x superior quality air filters
1 x superior quality linkage kit and fittings
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PPO203
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits:
Porsche 911 1965-73
Porsche 914-6 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 72
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99916702002
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 356 / 356A / 356B / 356C - 1950 to 1965
Porsche 911 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 928 - 1978 to 1995
Porsche 914 - 1970 to 1976
The N0155213 Ball Socket for Carburetor Linkage is a precision-engineered component designed for use in various Porsche models, including the iconic Porsche 356, 911, 964, 928, and 914. This finely crafted ball socket plays a crucial role in the functionality of the carburetor linkage system.
Specifically, the 5mm ball socket serves as a pivotal connection point within the carburetor linkage, facilitating smooth and responsive throttle control. It ensures a precise and direct link between the throttle mechanism and the carburetor, allowing for optimal fuel and air mixture regulation. This level of precision is essential for achieving peak engine performance, responsiveness, and overall driving experience.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
N0155213
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
A8, left-hand thread.
Fits:
Porsche 356 1950-65
Porsche 911 / 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 27
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90016901002
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
This is a single carburetor, it is Webber Style 40 IDF, Please check with your garage before ordering
Choke: 28
Main: 200
Air:115
Idle: 50
Emulsion tube: 10.5
Fits:
Porsche 356
Porsche 912
Porsche 914
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
69210099040
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
This is a single carburetor, it is Webber Style 44 IDF, Please check with your garage before ordering.
Fits:
Porsche 356
Porsche 912
Porsche 914
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
69210099044
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 911 1969-73
Porsche 914/6 1970–1972
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110872002
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 914/6 (1970 - 1971)
Porsche 911 F (1968 - 1971)
Click 'Zoom in' for large parts diagram.
Diagram ref no 68
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110098500
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 356 (1950-1955)
Porsche 356A (1955-1960)
Porsche 356B (1960-1963)
Porsche 356C (1964-1965)
Porsche 912 (1965-1969)
Click 'Zoom in' for large parts diagram.
Diagram ref no 9
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99952200302
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
For weber carburetors
Porsche 911/912 1965-69
Porsche 914-6 1970-72
Click 'Zoom in' for large parts diagram.
Diagram ref no 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110821800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
For weber carburetors
Porsche 911/912 1965-69
Porsche 914-6 1970-72
Click 'Zoom in' for large parts diagram.
Diagram ref no 35
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110821800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 912 1965-69
Porsche 356 B/C 1600/S90/SC 1960-65
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610839000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Choke: 32mm
Main: 125mm
Air:180 mm
Idle: 55mm
Emulsion tube:F11
Fits:
Porsche 356 B Super 90 1.6 01/59-12/63
Porsche 356 C SC 1.6 01/63-12/65
Porsche 912 1.6 01/65-02/70
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610810
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1956 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1965 to 1965
Porsche 911 2.0ltr - 1965 to 1968
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610091100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 911 1965-68
Only for vehicles with Solex PI-1 carburettor
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110819500
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits:
Porsche 911 engines between 65-73
911 standard models 1966-67 - 40 IDA Carburettor
911S 1967-68 - 40 IDS Carburettor
911L 1968 - 40 IDAP Carburettor
911T 1969-71 -40 IDTP Carburettor
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110840IDA3C
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche
912
1600
356
Super 90
Please note that 7101-G is ONE diaphram only
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
7101-G
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
For Solex 40 PII-4 and 44 PII-4
Porsche 356 B/C 1.6 01/59-12/65
Porsche 912 1.6 01/65-07/68
Click 'Zoom in' for large parts diagram.
Diagram ref no 15
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610090601
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356 - 1950 to 1955
Porsche 356A - 1955 to 1959
Porsche 356B - 1959 to 1963
Porsche 356C - 1963 to 1965
Porsche 912 - 1966 to 1968
For Solex carburettors
32 PBI / 32PBIC / 40 PBIC / 40 PII / 40 PII-4 / 40PII-4/44
Click 'Zoom in' for large parts diagram.
Diagram ref no 37
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610094400
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
2 sets required per car
40TIN Service kit
Service kit to suit the Zenith Pierburg 40TIN as fitted to Porsche 911 2195cc and 2341cc 1969-73
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9612862000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
2 sets required per car
For installation in:
Porsche 911 F (1965 - 1971) ONLY with Weber 40 carburettor
Porsche 914/6 (1970 - 1972)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG10894800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Set includes gaskets and seals for 2 carburettors
Fits:
Porsche 911 - 1965 to 1971) ONLY with Weber 40 carburettor
Porsche 914/6 (1970 - 1972)
Included in Set
-Carburetor Base Gaskets
-Top Cover Gasket
-Air Filter Base Gasket
-Fuel Inlet Fittings Fiber Washers
-Idle Jet Holder O-Rings
-Main Jet Holder Copper Washers
-Float Bowl Plug Copper Washers
-Float Fulcrum Pin Copper Washers
-Accelerator Pump Jet Copper Washers
-Accelerator Pump Diaphragms (Inner and Outer
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PCG10894800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 T 1969-70 WEBER Carbs
Porsche 911 T 1971-73 ZENITH Carbs
Porsche 914/6 1970–1972
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110813100
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 1965-89
Product Specifications:
Part Number: E-3671
Product Style: Oval Air Filter
Air Filter Shape: Oval
Height: 3.25 in (83 mm)
Inner Wire: No
Inside Length: 10.75 in (273 mm)
Inside Width: 4 in (102 mm)
Outside Length: 12 in (305 mm)
Outside Width: 5.25 in (133 mm)
Top Style: Open
Top Material/Finish: None
Filter Material: Cotton Gauze
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.
Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.
K&N drop-in replacement filters are designed to install easily into your factory air box.
Works with Original Equipment Manufacturer Vehicle Electronics.
Environmentally Friendly, K&N Reusable Air Filters
Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-3671
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
This Product Fits:
Porsche 911 with carbs
K&N brand air filter, part number 56-1240 which is now 56-1770-1 this is for Weber 40/46 IDA (Triple carb) as fitted to Porsche 911.
K&N Custom Air Filter kits are designed to allow the maximum performance from your carburettors, yet keep the dirt on the outside where it belongs. These assemblies come with top and base plates and the famous K&N High-Flow Washable Air Filter.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
56-1770-2
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
Manifold set to allow replacement of original Solex carburettors with 2 x Weber 40IDF carburettors. To replace Zenith carburettors, please see MM4051.
The following additional parts will also be required:
2 x AFB 320 air filter
1 x 9900531400 lever
1 x 9900531500 lever
1 x 5555503800 washer
2 x 4043179900 throttle stop
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Manifold set to allow replacement of original Zenith carburettors with 2 x Weber 40IDF carburettors. To replace Solex carburettors, please see MM4050.
The following additional parts will also be required:
2 x AFB 320 air filter
1 x 9900531400 lever
1 x 9900531500 lever
1 x 5555503800 washer
2 x 4043179900 throttle stop
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Fits:
Porsche 356 1.5L 1600 S 1950-59 with SOLEX 40 PBIC with chassis M >> 81 200
Porsche 356 A / B Carrera GS 1.6L 1959 with SOLEX 40 P II-4/WEBER
Porsche 911 >> 1968 with SOLEX 40 PI-1
Click 'Zoom in' for large parts diagram.
Diagram ref no 80
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610090501
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
Performance kit to allow fitment of 2 x Genuine Spanish Weber 34 ICT carburettors to the VW T2 1.7 / 1.8 / 2.0 Van, and the Porsche 914/4.
Kit consists of
2 x Weber 34 ICT carburettors
1 x Intake Manifold set
1 x Webcon linkage set, studs, nuts, washers, air filters, Weber tuning manual etc
Please see cross selling products for details of Low Pressure fuel pump
Kit is supplied with the following jet spec
NEEDLE VALVE 175
AIR CORR 160
E TUBE F78
MAIN JET 140
IDLE JET 60
PUMP JET 50
BLEED VALVE 40
AUX VENT 4.5
CHOKE 29
FLOAT HEIGHT 8mm
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PVW207
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits
Porsche 911 - Air cooled engine with Weber Carburettors
Kit Includes
Please see the PMO vs OE Carb Overview
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Fits:
Porsche 911 / 912 1965-69
Porsche 914 1970-75
Click 'Zoom in' for large parts diagram.
Diagram ref no 26
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110808900
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Rain hats for K&N air filters IDF 40/44 on Weber carbs.
Made from fiber cloth with a honey-coloured resin.
Fits:
Porsche 911
Porsche 914-6
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Made from fiber cloth with a honey-coloured special resin.
Fits:
Porsche 911 R / ST
Porsche 906
Porsche 914-6 GT
Available in three combinations:
2 x flat
2 x bent
1 x flat + 1 x bent
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Webcon replacement carburettor kit to suit the VW Type 4 and Porsche 914 1.7/1.8/2.0 Flat 4 air cooled models
Featuring a genuine Spanish Weber electric choke carburettor, the Webcon kit is designed to fit the original manifold and air filters (unless a new air filter is included), using specially designed adaptors.
Kits are supplied with a good starting jet specification but may benefit from fine tuning on a rolling road
The Webcon replacement range of carburettor kits is the Worlds largest and best engineered range. We have been developing the range in the same facility, using the same engineers since 1978 and every kit that we produce is designed to return your car to factory levels of performance, and in many cases, better the original economy figures. Hot and cold starting, and general driveability will be greatly improved, and the fitment of a genuine Webcon replacement carburettor kit is generally understood to enhance the value of your car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PPO101
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
32 PBI / PBIC / PICB Service kit
Service kit to suit the Solex 32 PBI / PICB / PICB as fitted to
Mercedes 220B 1959-1965
Porsche
Rover
Landrover
Service kits include gaskets, seals, diaphrams and needle/seat
Please note that service kits do not include jets, however these are available separately from Webcon if required.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9611736000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
40TIN Service kit
Service kit to suit the Zenith Pierburg 40TIN as fitted to Porsche 911 2195cc and 2341cc 1969-73
Service kits include gaskets, seals, diaphrams and needle/seat
This service kit includes parts for 2 carburettors
Please note that service kits do not include jets.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9612862000
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
2 required. Price is for one kit.
Fits:
For Solex 40 PII-4 and 44 PII-4
Porsche 356 B/C 1.6 01/59-12/65
Porsche 912 1.6 01/65-07/68
Click 'Zoom in' for large parts diagram.
Diagram ref no 42 and 43.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
61610092701
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
A carburetor (American and Canadian spelling), carburator, carburettor, or carburetter (Commonwealth spelling) is a device that blends air and fuel for an internal combustion engine.
- Gaskets & Sets
- Radial Seal / RMS / Camshaft / Balance shaft
- Intermediate shaft (IMS)
- Oil System Parts
- Fuel System Parts
- Belts / Tensioners / Rollers
- Chains & Tensioners
- Timing covers and gaskets
- Engine Bearings / Shells
- Engine Valves / Guides / Springs
- Rocker Arms & Tappets
- Engine Bolts / Studs
- Piston Rings
- Engine Cylinders / Liners / Pistons
- Connecting Rod
- Cylinder Head / Camshaft Carrier
- Camshaft covers / Gaskets
- Camshafts
- Camshaft gears / sprockets and fixings
- Crankcase Parts
- Crankshaft & Parts
- Engine Tinware
- Engine Mounts
- Turbo Chargers / Intercoolers & Parts
- Air Intake & Injection
- PMO Carburetors
- Direct-to-Head Throttle Bodies
- Jenvey Throttle Bodies
- Specialist Tools