Catalyst / Bypass
Constructed from high-quality stainless steel, this optional addition to the Slip-On Line will enhance the sound of the exhaust, and power will be taken to greater heights. Fitted with sporty catalytic converters that meet ECE requirements, installing this option increases the engine's performance and adds an aural improvement for all to appreciate. Providing improved flow for the exhaust gases, the link pipes take the 911 to greater heights.
Fits:
Porsche 911 (991.2) Carrera / S / 4/ 4S / GTS 2017>>
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
L-PO
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Free-flowing straight pipes replace the bulky & restrictive factory catalytic converters; designed specifically for maximum flow during racing or competition.
FEATURES:
• Fits: all Porsche 991.2 Carrera base models equipped with standard exhaust; does not fit with PSE (2016+); only fits S models as part of a complete exhaust package.
• Maximizes power and throttle response while decreasing back pressure.
• Completely removes the catalytic converters for maximum exhaust flow and performance.
• Constructed from high-quality stainless steel for optimum flow and maximum durability.
• Direct replacement bolt-on for stock cat or Sport Cats
DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product is or contains a Racing Cat Bypass Pipe, which will give you check engine lights on OBD2 cars. We suggest pairing this product with racing software to prevent fault codes and check engine lights. Racing Cat Bypass Pipes are solely intended for track and race cars as they are NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606109912
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Free-flowing straight pipes replace the bulky & restrictive factory catalytic converters; designed specifically for maximum flow during racing or competition.
FEATURES:
• Fits: all Porsche 991.2 Carrera base models equipped with standard exhaust; does not fit with PSE (2016+); only fits S models as part of a complete exhaust package.
• Maximizes power and throttle response while decreasing back pressure
• Completely removes the catalytic converters for maximum exhaust flow and performance
• Constructed from high-quality .065" thick T304L stainless steel for optimum flow and maximum durability
• Designed and built in-house at Fabspeed in our full precision machine shop
• Includes intergrated O2 sensor bungs
• Fabspeed recommends the use of O2 Sensor Spacers in order to minimize the chance of triggering a CEL
• Direct replacement bolt-on for stock cat or Sport Cats
• Fabspeed performance products are backed by Fabspeed's Limited Lifetime Warranty
NOTE: Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912CB
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Free-flowing straight pipes replace the bulky & restrictive factory catalytic converters; designed specifically for maximum flow during racing or competition
FEATURES:
• Fits: all Porsche 991.2 Carrera models (2016+) equipped with Porsche Sport Exhaust (PSE)
• Maximizes power and throttle response while decreasing back pressure
• Completely removes the catalytic converters for maximum exhaust flow and performance
• Constructed from high-quality .065" thick T304L stainless steel for optimum flow and maximum durability
• Designed and built in-house at Fabspeed in our full precision machine shop
• Includes integrated O2 sensor bungs
• Fabspeed recommends the use of O2 Sensor Spacers in order to minimize the chance of triggering a CEL
• Direct replacement bolt-on for stock cat or Sport Cats
• Fabspeed performance products are backed by Fabspeed's Limited Lifetime Warranty
NOTE: Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California
DOES MY CAR HAVE "PSE"?
The Porsche Sport Exhaust – better known as PSE – was a factory option available on many late model Porsches. You can quickly and easily determine if your vehicle is equipped with PSE by taking a look at your center console. If your console has a button on it with an "exhaust tip" icon (see photo), then your vehicle is equipped with PSE, and you should select the PSE option when adding this product to your cart. If you do not see this button, the your vehicle does not have PSE and you should select the standard exhaust option when checking out.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912PSECB
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
High-flowing, direct bolt-on replacement for the bulky & restrictive factory catalytic converters.
FEATURES:
• Fits: all Porsche 991.2 Carrera base models equipped with standard exhaust; does not fit with PSE (2016+); only fits S models as part of a complete exhaust package.
• Improves power and throttle response while decreasing back pressure
• Designed with high flowing German imported 200-cell HJS catalysts for the ideal blend of performance and efficiency
• Constructed from high-quality .065" thick T304L stainless steel for optimum flow and maximum durability
• Designed and built in-house at Fabspeed in our full precision machine shop
• Includes integrated O2 sensor bungs
• Direct replacement bolt-on for stock cat or Catbypass Pipes
• Fabspeed performance products are backed by Fabspeed's Limited Lifetime Warranty
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912SC
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
High-flowing, direct bolt-on replacement for the bulky & restrictive factory catalytic converters
FEATURES:
• Fits all Porsche 991.2 Carrera (3.0L Twin Turbo) models (2017+) equipped with Porsche Sport Exhaust (PSE)
• Improves power and throttle response while decreasing back pressure
• Designed with high flowing German imported 200-cell HJS catalysts for the ideal blend of performance and efficiency
• Optimized for maximum performance with NO catalyst generated check engine light, guaranteed
• Constructed from high-quality .065" thick T304L stainless steel for optimum flow and maximum durability
• Designed and built in-house at Fabspeed in our full precision machine shop
• Includes integrated O2 sensor bungs
• Direct replacement bolt-on for stock cat or Catbypass Pipes
• If your vehicle is equipped with a GPF Filter, please contact us prior to purchasing
NOTE: Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California
DOES MY CAR HAVE "PSE"?
The Porsche Sport Exhaust – better known as PSE – was a factory option available on many late model Porsches. You can quickly and easily determine if your vehicle is equipped with PSE by taking a look at your center console. If your console has a button on it with an "exhaust tip" icon (see photo), then your vehicle is equipped with PSE, and you should select the PSE option when adding this product to your cart. If you do not see this button, the your vehicle does not have PSE and you should select the standard exhaust option when checking out.
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR9912PSESC
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.
Fits:
Many Porsche vehicles. Universal kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
100390100392
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
- Porsche 992 Speedster 4.0L
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
- Porsche 992 GT3 4.0L
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
For cars without Gasoline Particulate Filter
Fits
Porsche 991.2 Carrera 2016 Onwards
Porsche 991.2 Carrera S 2016 Onwards
Porsche 991.2 Carrera 4 2016 Onwards
Porsche 991.2 Carrera 4S 2016 Onwards
Pair of Stainless steel Sports Exhaust catalytic converter delete pipes for cars without Gasoline Particulate Filter (GPF)
TFL Italy is a company specialising in the production of exhaust systems for sports cars.
At the basis of our achievements there are skills and experience, attention and professionalism.
We have the most innovative and cutting edge equipment that allows us to carry out all metal
processing in house.
We have machinery for laser cutting of sheet metal and tubes; for punching, bending and
calendaring sheet metal; for band and disc cutting.
We use the best tools for TIG and MIG welding and liquid and powder painting.
In our design office we take care of rapid prototyping through the use of innovative 3D scanners.
All this allows us to guarantee precise workmanship capable of ensuring resistance and quality.
This allows us to produce exhaust systems for sports cars of all sizes and types,
suitable for the best vehicles on the market.
We carry out each job with the utmost professionalism, from design to testing
for road homologation.
We value the performance and technical characteristics of sports car exhausts
but we do not put design aside.
TFL Italy offers a wide range of solutions to meet the different needs and preferences
of each customer
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
P0.008.C01
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits
Porsche 991.2 Carrera with standard exhaust
Porsche 991.2 Carrera S with standard exhaust
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
CATALYTIC CONVERTER REMOVAL
These high flow pipes replace the catalytic converters and minimise exhaust back pressure to deliver optimum results in terms of performance and weight reduction
INSTALLATION
This product can only be mounted on Carrera and Carrera S versions equipped with a standard exhaust system (and NOT a Porsche Sports Exhaust-PSE)
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
ECU REMAPPING FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits
Porsche 991.2 Carrera with Porsche Sports Exhaust
Porsche 991.2 Carrera S with Porsche Sports Exhaust
Porsche 991.2 GTS
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
CATALYTIC CONVERTER REMOVAL
These high flow pipes replace the catalytic converters and minimise exhaust back pressure to deliver optimum results in terms of performance and weight reduction
INSTALLATION
This product can only be mounted on Carrera, Carrera S and GTS versions equipped with a Porsche Sports Exhaust system (and NOT the standard exhaust)
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
ECU REMAPPING FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits
Porsche 991.2 Carrera without PSE
Porsche 991.2 Carrera S without PSE
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This product can only be mounted on Carrera and Carrera S versions equipped with a standard exhaust system (and NOT with a Porsche Sports Exhaust - PSE)
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
CATALYTIC CONVERTER - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
ECU REMAPPING FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it
CATALYTIC CONVERTER FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
HEAT SHIELDING - INSULATED
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Fits
Porsche 991.2 Carrera with PSE
Porsche 991.2 Carrera S with PSE
Porsche 991.2 GTS
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This product can only be mounted on Carrera and Carrera S versions equipped with Porsche Sports Exhaust - PSE (and not a standard exhaust)
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
CATALYTIC CONVERTER - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
ECU REMAPPING FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it
CATALYTIC CONVERTER FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
For cars with Gasoline Particulate Filter.
This system will remove the GPF.
The will increase the cars BHP by about 35hp.
The car will need remapping because this is a De-cat (removing the GPF) this will cause the cars warning light to turn on.
Fits
Porsche 991.2 Carrera 2016 Onwards
Porsche 991.2 Carrera S 2016 Onwards
Porsche 991.2 Carrera 4 2016 Onwards
Porsche 991.2 Carrera 4S 2016 Onwards
Pair of Stainless steel Sports Exhaust catalytic converters for cars with Gasoline Particulate Filter (GPF)
TFL Italy is a company specialising in the production of exhaust systems for sports cars.
At the basis of our achievements there are skills and experience, attention and professionalism.
We have the most innovative and cutting edge equipment that allows us to carry out all metal
processing in house.
We have machinery for laser cutting of sheet metal and tubes; for punching, bending and
calendaring sheet metal; for band and disc cutting.
We use the best tools for TIG and MIG welding and liquid and powder painting.
In our design office we take care of rapid prototyping through the use of innovative 3D scanners.
All this allows us to guarantee precise workmanship capable of ensuring resistance and quality.
This allows us to produce exhaust systems for sports cars of all sizes and types,
suitable for the best vehicles on the market.
We carry out each job with the utmost professionalism, from design to testing
for road homologation.
We value the performance and technical characteristics of sports car exhausts
but we do not put design aside.
TFL Italy offers a wide range of solutions to meet the different needs and preferences
of each customer
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
P0.014.C01
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
For cars without Gasoline Particulate Filter
Fits
Porsche 991.2 Carrera 2016 Onwards
Porsche 991.2 Carrera S 2016 Onwards
Porsche 991.2 Carrera 4 2016 Onwards
Porsche 991.2 Carrera 4S 2016 Onwards
Pair of Stainless steel Sports Exhaust catalytic converters for cars without Gasoline Particulate Filter (GPF)
TFL Italy is a company specialising in the production of exhaust systems for sports cars.
At the basis of our achievements there are skills and experience, attention and professionalism.
We have the most innovative and cutting edge equipment that allows us to carry out all metal
processing in house.
We have machinery for laser cutting of sheet metal and tubes; for punching, bending and
calendaring sheet metal; for band and disc cutting.
We use the best tools for TIG and MIG welding and liquid and powder painting.
In our design office we take care of rapid prototyping through the use of innovative 3D scanners.
All this allows us to guarantee precise workmanship capable of ensuring resistance and quality.
This allows us to produce exhaust systems for sports cars of all sizes and types,
suitable for the best vehicles on the market.
We carry out each job with the utmost professionalism, from design to testing
for road homologation.
We value the performance and technical characteristics of sports car exhausts
but we do not put design aside.
TFL Italy offers a wide range of solutions to meet the different needs and preferences
of each customer
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
P0.007.C01
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Stainless steel with pneumatic exhaust valves
Fits
Porsche 991.2 Carrera 2016 Onwards
Porsche 991.2 Carrera S 2016 Onwards
Porsche 991.2 Carrera 4 2016 Onwards
Porsche 991.2 Carrera 4S 2016 Onwards
Stainless steel Sports Exhaust rear silencer with pneumatic exhaust valves
TFL Italy is a company specialising in the production of exhaust systems for sports cars.
At the basis of our achievements there are skills and experience, attention and professionalism.
We have the most innovative and cutting edge equipment that allows us to carry out all metal
processing in house.
We have machinery for laser cutting of sheet metal and tubes; for punching, bending and
calendaring sheet metal; for band and disc cutting.
We use the best tools for TIG and MIG welding and liquid and powder painting.
In our design office we take care of rapid prototyping through the use of innovative 3D scanners.
All this allows us to guarantee precise workmanship capable of ensuring resistance and quality.
This allows us to produce exhaust systems for sports cars of all sizes and types,
suitable for the best vehicles on the market.
We carry out each job with the utmost professionalism, from design to testing
for road homologation.
We value the performance and technical characteristics of sports car exhausts
but we do not put design aside.
TFL Italy offers a wide range of solutions to meet the different needs and preferences
of each customer
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
P0.009.C01
The product you are viewing cross references to these numbers
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
Title: Porsche Exhaust Catalyst and Bypass Sports Catalyst: Technical Specifications and Benefits
Key Points:
Enhanced Performance: Upgrading your Porsche's exhaust catalyst or opting for a bypass sports catalyst can significantly improve performance by increasing horsepower and torque output. These aftermarket options are designed to optimize exhaust flow, resulting in improved engine efficiency and throttle response.
Enhanced Sound: An original Porsche or aftermarket exhaust catalyst can enhance the auditory experience of your vehicle. They offer a deeper, more aggressive exhaust note, providing a sportier sound that complements the performance-oriented nature of a Porsche.
Compliance with Emissions Standards: When purchasing an exhaust catalyst, it is crucial to consider its compliance with local emissions regulations. Porsche exhaust catalysts are engineered to meet strict emissions standards, ensuring that your vehicle remains environmentally friendly while delivering enhanced performance.
Quality and Durability: Original Porsche exhaust catalysts are manufactured to the highest standards, ensuring exceptional quality and durability. Aftermarket options from reputable brands also offer similar reliability, providing a long-lasting solution for your Porsche's exhaust system.
Easy Installation: Both original Porsche and aftermarket exhaust catalysts are designed to be direct replacements, making installation relatively straightforward. However, it is essential to follow the manufacturer's instructions or seek professional assistance to ensure proper fitment and optimal performance.
At Design911, we understand the importance of finding the correct part for your Porsche and providing the best professional advice. Our dedicated team of experts specializes in Porsche parts and accessories, including exhaust catalysts. With our extensive knowledge and experience, we can assist you in finding the right exhaust catalyst or bypass sports catalyst for your Porsche model, taking into account your specific requirements and local regulations. We are committed to delivering top-quality products and ensuring customer satisfaction. Contact us today for personalized assistance and an enhanced driving experience with your Porsche.
- Sport Silencers / Mufflers
- Switchable Silencers / Mufflers
- All Silencers / Mufflers
- Manifold / Headers
- Exhaust Tail Pipes
- Heat Exchangers
- Exhaust Package
- Exhaust Gaskets
- Exhaust Nuts / Bolts / Studs
- Brackets / Clamps / Straps
- Exhaust Fitting Kits
- Sport Exhaust Vacuum Parts
- Fabspeed Exhaust
- Lambda Sensors / Probes
- Lambda Sensor Extensions