Cylinder Head / Camshaft Carrier
Cut outs and circlip insertion tool holes need to be machined after fitting. Ductile Iron Material.
Fits:
Porsche 997 3.8L Price is Each
Inside Diameter 99.00mm / 3.898inch
Outside Diameter 104.20mm / 4.102inch
Length 128.00mm / 5.040inch
Flange Diameter 113.50mm / 4.469inch
Flange Depth 46.00mm / 1.811inch
The liners will need to be fitted by a professional machine shop. You will not need to get special pistons or rings, as the original spec ones can't be used with these cast iron liners.
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Engine Rebuild Kit
- Gaskets & Sets
- Radial Seal / RMS / Camshaft / Balance shaft
- Intermediate shaft (IMS)
- Oil System Parts
- Fuel System Parts
- Belts / Tensioners / Rollers
- Chains & Tensioners
- Timing covers and gaskets
- Engine Bearings / Shells
- Engine Valves / Guides / Springs
- Rocker Arms & Tappets
- Engine Bolts / Studs
- Piston Rings
- Engine Cylinders / Liners / Pistons
- Connecting Rod
- Camshaft covers / Gaskets
- Camshafts
- Camshaft gears / sprockets and fixings
- Crankcase Parts
- Crankshaft & Parts
- Engine Mounts
- Turbo Chargers / Intercoolers & Parts
- Air Intake & Injection
- Vacuum Pump
- Cylinder Liner
- Specialist Tools