All Silencers / Mufflers
Fits:
Porsche 718 Boxster / Boxster S 2.0T/2.5T (PSE Only)
Porsche 718 Cayman / Cayman S 2.0T/2.5T (PSE Only)
Multiple options covering every taste, accompanied by unmatched quality, fitment, performance, and a tailored AWE Tuning soundtrack. This is the finest 718 exhaust suite available.
• Max gains of 9.5 hp @ 7200 rpm and 6 ft-lbs of torque starting @ 4370 rpm at the crank
• Available as:
→ valved SwitchPath™ (retains factory PSE button operation),
→ refined Touring Edition, or
→ more unleashed Track Edition
• 102mm double-walled tips available in:
→ Chrome Silver
→ Diamond Black
→ 96mm stainless steel tips with carbon fiber sleeve
• 10.5 lb weight savings over stock with complete Track Edition, 6.5 lb savings with Touring Edition, and 2.5 lb savings with SwitchPath™
• Does not interfere with factory emissions equipment
• Less is more: clean, straight-through design maximizes performance
• Engineered, designed, and manufactured in-house at AWE Tuning
• Handcrafted from U.S.-sourced CNC mandrel-bent 0.65" wall T304 stainless steel
• Direct bolt-on system for factory-like simplicity and easy installation
• No Check Engine Light - Guaranteed
• Perfect Fitment - Guaranteed
• Featuring the AWE Tuning Lifetime Exhaust Warranty
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3025-33020
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
Fits:
Porsche 718 Boxster / Boxster S 2.0T/2.5T (PSE Only)
Porsche 718 Cayman / Cayman S 2.0T/2.5T (PSE Only)
Multiple options covering every taste, accompanied by unmatched quality, fitment, performance, and a tailored AWE Tuning soundtrack. This is the finest 718 exhaust suite available.
• Max gains of 9.5 hp @ 7200 rpm and 6 ft-lbs of torque starting @ 4370 rpm at the crank
• Available as:
→ valved SwitchPath™ (retains factory PSE button operation),
→ refined Touring Edition, or
→ more unleashed Track Edition
• 102mm double-walled tips available in:
→ Chrome Silver
→ Diamond Black
→ 96mm stainless steel tips with carbon fiber sleeve
• 10.5 lb weight savings over stock with complete Track Edition, 6.5 lb savings with Touring Edition, and 2.5 lb savings with SwitchPath™
• Does not interfere with factory emissions equipment
• Less is more: clean, straight-through design maximizes performance
• Engineered, designed, and manufactured in-house at AWE Tuning
• Handcrafted from U.S.-sourced CNC mandrel-bent 0.65" wall T304 stainless steel
• Direct bolt-on system for factory-like simplicity and easy installation
• No Check Engine Light - Guaranteed
• Perfect Fitment - Guaranteed
• Featuring the AWE Tuning Lifetime Exhaust Warranty
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3025-32020
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
Fits:
Porsche 718 Boxster / Boxster S 2.0T/2.5T
Porsche 718 Cayman / Cayman S 2.0T/2.5T
Multiple options covering every taste, accompanied by unmatched quality, fitment, performance, and a tailored AWE Tuning soundtrack. This is the finest 718 exhaust suite available.
• Max gains of 9.5 hp @ 7200 rpm and 6 ft-lbs of torque starting @ 4370 rpm at the crank
• Available as:
→ valved SwitchPath™ (retains factory PSE button operation),
→ refined Touring Edition, or
→ more unleashed Track Edition
• 102mm double-walled tips available in:
→ Chrome Silver
→ Diamond Black
→ 96mm stainless steel tips with carbon fiber sleeve
• 10.5 lb weight savings over stock with complete Track Edition, 6.5 lb savings with Touring Edition, and 2.5 lb savings with SwitchPath™
• Does not interfere with factory emissions equipment
• Less is more: clean, straight-through design maximizes performance
• Engineered, designed, and manufactured in-house at AWE Tuning
• Handcrafted from U.S.-sourced CNC mandrel-bent 0.65" wall T304 stainless steel
• Direct bolt-on system for factory-like simplicity and easy installation
• No Check Engine Light - Guaranteed
• Perfect Fitment - Guaranteed
• Featuring the AWE Tuning Lifetime Exhaust Warranty
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3015-33080
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
Fits:
Porsche 718 Boxster / Boxster S 2.0T/2.5T
Porsche 718 Cayman / Cayman S 2.0T/2.5T
Multiple options covering every taste, accompanied by unmatched quality, fitment, performance, and a tailored AWE Tuning soundtrack. This is the finest 718 exhaust suite available.
• Max gains of 9.5 hp @ 7200 rpm and 6 ft-lbs of torque starting @ 4370 rpm at the crank
• Available as:
→ valved SwitchPath™ (retains factory PSE button operation),
→ refined Touring Edition, or
→ more unleashed Track Edition
• 102mm double-walled tips available in:
→ Chrome Silver
→ Diamond Black
→ 96mm stainless steel tips with carbon fiber sleeve
• 10.5 lb weight savings over stock with complete Track Edition, 6.5 lb savings with Touring Edition, and 2.5 lb savings with SwitchPath™
• Does not interfere with factory emissions equipment
• Less is more: clean, straight-through design maximizes performance
• Engineered, designed, and manufactured in-house at AWE Tuning
• Handcrafted from U.S.-sourced CNC mandrel-bent 0.65" wall T304 stainless steel
• Direct bolt-on system for factory-like simplicity and easy installation
• No Check Engine Light - Guaranteed
• Perfect Fitment - Guaranteed
• Featuring the AWE Tuning Lifetime Exhaust Warranty
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3015-32080
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
Fits:
Porsche 718 Boxster / Boxster S / Boxster GTS 2.0T/2.5T
Porsche 718 Cayman / Cayman S / Cayman GTS 2.0T/2.5T
Track Conversion Kit (3810-11044) by AWE Tuning®.
It's too loud! It's too quiet! Don't worry.
If you're looking to crank up a notch or bring it down, perfectly engineered upgrade paths are available. Turn your Touring Edition to a Track Edition, or vice versa, with ease. Simply unclamp the rear Touring or Track Edition sections and replace with the new configuration.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3810-11044
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Fits:
Porsche 718 Boxster / Boxster S 2.0T/2.5T
Porsche 718 Cayman / Cayman S 2.0T/2.5T
Multiple options covering every taste, accompanied by unmatched quality, fitment, performance, and a tailored AWE Tuning soundtrack. This is the finest 718 exhaust suite available.
• Max gains of 9.5 hp @ 7200 rpm and 6 ft-lbs of torque starting @ 4370 rpm at the crank
• Available as:
→ valved SwitchPath™ (retains factory PSE button operation),
→ refined Touring Edition, or
→ more unleashed Track Edition
• 102mm double-walled tips available in:
→ Chrome Silver
→ Diamond Black
→ 96mm stainless steel tips with carbon fiber sleeve
• 10.5 lb weight savings over stock with complete Track Edition, 6.5 lb savings with Touring Edition, and 2.5 lb savings with SwitchPath™
• Does not interfere with factory emissions equipment
• Less is more: clean, straight-through design maximizes performance
• Engineered, designed, and manufactured in-house at AWE Tuning
• Handcrafted from U.S.-sourced CNC mandrel-bent 0.65" wall T304 stainless steel
• Direct bolt-on system for factory-like simplicity and easy installation
• No Check Engine Light - Guaranteed
• Perfect Fitment - Guaranteed
• Featuring the AWE Tuning Lifetime Exhaust Warranty
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3010-33048
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
Fits:
Porsche 718 Boxster / Boxster S 2.0T/2.5T
Porsche 718 Cayman / Cayman S 2.0T/2.5T
Multiple options covering every taste, accompanied by unmatched quality, fitment, performance, and a tailored AWE Tuning soundtrack. This is the finest 718 exhaust suite available.
• Max gains of 9.5 hp @ 7200 rpm and 6 ft-lbs of torque starting @ 4370 rpm at the crank
• Available as:
→ valved SwitchPath™ (retains factory PSE button operation),
→ refined Touring Edition, or
→ more unleashed Track Edition
• 102mm double-walled tips available in:
→ Chrome Silver
→ Diamond Black
→ 96mm stainless steel tips with carbon fiber sleeve
• 10.5 lb weight savings over stock with complete Track Edition, 6.5 lb savings with Touring Edition, and 2.5 lb savings with SwitchPath™
• Does not interfere with factory emissions equipment
• Less is more: clean, straight-through design maximizes performance
• Engineered, designed, and manufactured in-house at AWE Tuning
• Handcrafted from U.S.-sourced CNC mandrel-bent 0.65" wall T304 stainless steel
• Direct bolt-on system for factory-like simplicity and easy installation
• No Check Engine Light - Guaranteed
• Perfect Fitment - Guaranteed
• Featuring the AWE Tuning Lifetime Exhaust Warranty
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3010-32038
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
Fits:
Porsche 718 Boxster / Boxster S / Boxster GTS 2.0T/2.5T
Porsche 718 Cayman / Cayman S / Cayman GTS 2.0T/2.5T
Touring Conversion Kit (3810-11046) by AWE Tuning®.
It's too loud! It's too quiet! Don't worry.
If you're looking to crank up a notch or bring it down, perfectly engineered upgrade paths are available. Turn your Touring Edition to a Track Edition, or vice versa, with ease. Simply unclamp the rear Touring or Track Edition sections and replace with the new configuration.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3810-11046
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Fits:
Porsche 718 Boxster / Cayman 2.0ltr
Porsche 718 Boxster / Cayman T 2.0ltr
Porsche 718 Boxster / Cayman S 2.5ltr
Porsche 718 Boxster / Cayman GTS 2.5ltr
To be installed only as a full kit with
248721 or 248711 - Downpipe (with or without Catalytic converter)
248712 - Front connecting pipe
248926 x 1 / 248956 x 1 / 248976 x 1 - Tailpipes
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
248934
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
with polished steel tailpipe trims
Fits:
Porsche 718 Boxster / Cayman 2.0ltr
Porsche 718 Boxster / Cayman T 2.0ltr
Porsche 718 Boxster / Cayman S 2.5ltr
Porsche 718 Boxster / Cayman GTS 2.5ltr
Replacement SPORT rear silencer that is compatible with the OEM catalytic converter.
Polished Steel tailpipe trim diameter - OO 90mm
Made from 100% Stainless Steel
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
248826
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
with gun metal grey tailpipe trims
Fits:
Porsche 718 Boxster / Cayman 2.0ltr
Porsche 718 Boxster / Cayman T 2.0ltr
Porsche 718 Boxster / Cayman S 2.5ltr
Porsche 718 Boxster / Cayman GTS 2.5ltr
Replacement SPORT rear silencer that is compatible with the OEM catalytic converter.
Gun Metal Grey tailpipe trim diameter - OO 90mm
Made from 100% Stainless Steel
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
248856
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
DesignTek Valvetronic sports exhaust system gives smooth power and torque to the wheels. Valves operated electronically.
Fits:
Porsche Boxster 982 (718)
Porsche Cayman 982 (718)
This system comes complete with Stainless steel Tail pipes.
Direct replacement for the factory mufflers. Compatible with OE catalytic converter pipe.
High-Performance Rear Exhaust with sound switch:
Switch closed: Deep Sports Sound
Switch opened: Racing Sports Sound
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606007181
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Kit includes central and rear silencers.
WITHOUT GASOLINE PARTICULATE FILTER (GPF)
Fits:
Porsche 718 Boxster 2.0Ltr - No GPF
Porsche 718 Boxster S 2.5Ltr - No GPF
Porsche 718 Cayman 2.0Ltr - No GPF
Porsche 718 Cayman S 2.5Ltr - No GPF
The kit includes the central and the rear silencers
The kit can only be controlled via the remote control or the Tubi APP When this system is fitted on a car equipped with the optional Porsche sports exhaust system, the exhaust valve will not be controlled by the SPORT control
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it
SOUND - + RUMORE
The + Rumore variant delivers the original Tubi Sound timbre but with the highest possible volume
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
REDUCED CELL CATALYTIC CONVERTER - 100 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided
HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
FOR CARS WITHOUT GASOLINE PARTICULATE FILTER (GPF)
Fits:
Porsche 718 Boxster 2.0Ltr - No GPF
Porsche 718 Boxster S 2.5Ltr - No GPF
Porsche 718 Cayman 2.0Ltr - No GPF
Porsche 718 Cayman S 2.5Ltr - No GPF
The kit includes the central and the rear silencers
The kit can only be controlled via the remote control or the Tubi APP When this system is fitted on a car equipped with the optional Porsche sports exhaust system, the exhaust valve will not be controlled by the SPORT control
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it
SOUND - + RUMORE
The + Rumore variant delivers the original Tubi Sound timbre but with the highest possible volume
VALVETRONIC SYSTEM - EXCU VALVETRONIC
The exhaust system is supplied complete of the Tubi Style Exhaust Control Unit. The control unit enables control of the standard Tubi Style exhaust system valve in 4 different modes tailored by Tubi Style, via APP and remote control. If this function is used, EC type-approval is no longer valid
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION - 2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
REDUCED CELL CATALYTIC CONVERTER - 100 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound
EXHAUST VALVE - ELECTRIC
The exhaust system is complete with electric valve. The electric actuator is not included and the standard actuator already installed on the car must be used. Control of the original valve is still provided
HEAT SHIELDING - INSULATED
Tubi Style ensures maximum protection for components in critical and dangerous positions by using insulation made with the same technology employed by car manufacturers
Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
718 Boxster, Cayman & GTS with and without GPF (gasoline particulate filter)
2.0/2.5Ltr 2016 onwards
RACETRACK USE ONLY
SOUND: TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand.
This kit must be mounted only on cars with an OE exhaust already equipped with pneumatic valves.The OE end tips must be used.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
EXHAUST: VALVE PNEUMATIC
The exhaust system is complete with pneumatic valve to replace the standard pneumatic valve installed on the car. Control of the original valve is still provided.
END TIPS DESIGN: OE
The muffler must be used in conjunction with the original exhaust end tips.
END TIPS NUMBER AND POSITION
2 CENTRAL
The end tips emerge from the centre.
AISI 304 STAINLESS STEEL
MAIN PIPE DIMENSION
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
718 Boxster, Cayman & GTS with and without GPF (gasoline particulate filter)
2.0/2.5Ltr 2016 onwards
RACETRACK USE ONLY:
SOUND: TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand.
The kit includes the right and left-hand mufflers without valve. It can be assembled on the OE central silencer, or in combination with the Tubi Style central silencer.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.
EXHAUST VALVE: NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the exhaust valve by both the engine ECU and by the driver via the specific control systems is no longer possible.
The muffler must be used in conjunction with the original exhaust end tips.
END TIPS DESIGN OE
The muffler must be used in conjunction with the original exhaust end tips.
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
With pneumatic valves and 90mm polished black tailpipes
Fits
2016 onwards
Porsche 718 Boxster 2.0Ltr
Porsche 718 Boxster S 2.5Ltr
Porsche 718 Boxster T 2.0Ltr
Porsche 718 Boxster GTS 2.5Ltr
Porsche 718 Cayman 2.0Ltr
Porsche 718 Cayman S 2.5Ltr
Porsche 718 Cayman T 2.0Ltr
Porsche 718 Cayman GTS 2.5Ltr
Rear stainless steel rear sports exhaust with valves and 90mm black polished tailpipes
TFL Italy is a company specialising in the production of exhaust systems for sports cars.
At the basis of our achievements there are skills and experience, attention and professionalism.
We have the most innovative and cutting edge equipment that allows us to carry out all metal
processing in house.
We have machinery for laser cutting of sheet metal and tubes; for punching, bending and
calendaring sheet metal; for band and disc cutting.
We use the best tools for TIG and MIG welding and liquid and powder painting.
In our design office we take care of rapid prototyping through the use of innovative 3D scanners.
All this allows us to guarantee precise workmanship capable of ensuring resistance and quality.
This allows us to produce exhaust systems for sports cars of all sizes and types,
suitable for the best vehicles on the market.
We carry out each job with the utmost professionalism, from design to testing
for road homologation.
We value the performance and technical characteristics of sports car exhausts
but we do not put design aside.
TFL Italy offers a wide range of solutions to meet the different needs and preferences
of each customer
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
P0.012.C01
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Without pneumatic valves
With 90mm polished black tailpipes
Fits
2016 onwards
Porsche 718 Boxster 2.0Ltr
Porsche 718 Boxster S 2.5Ltr
Porsche 718 Boxster T 2.0Ltr
Porsche 718 Boxster GTS 2.5Ltr
Porsche 718 Cayman 2.0Ltr
Porsche 718 Cayman S 2.5Ltr
Porsche 718 Cayman T 2.0Ltr
Porsche 718 Cayman GTS 2.5Ltr
Rear stainless steel rear sports exhaust without valves
Comes with 90mm black polished tailpipes
TFL Italy is a company specialising in the production of exhaust systems for sports cars.
At the basis of our achievements there are skills and experience, attention and professionalism.
We have the most innovative and cutting edge equipment that allows us to carry out all metal
processing in house.
We have machinery for laser cutting of sheet metal and tubes; for punching, bending and
calendaring sheet metal; for band and disc cutting.
We use the best tools for TIG and MIG welding and liquid and powder painting.
In our design office we take care of rapid prototyping through the use of innovative 3D scanners.
All this allows us to guarantee precise workmanship capable of ensuring resistance and quality.
This allows us to produce exhaust systems for sports cars of all sizes and types,
suitable for the best vehicles on the market.
We carry out each job with the utmost professionalism, from design to testing
for road homologation.
We value the performance and technical characteristics of sports car exhausts
but we do not put design aside.
TFL Italy offers a wide range of solutions to meet the different needs and preferences
of each customer
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
P0.013.C01
The product you are viewing cross references to these numbers
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Fits:
All Porsche models with vacuum operated valvetronic exhaust systems
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9996001111
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
Title: Upgrading Your Porsche's Exhaust System: Original Porsche vs. Aftermarket Mufflers and Sports Exhaust
Keywords: Porsche, exhaust mufflers, sports exhaust, upgrade, replacement, technical specifications, known issues, Design911, professional advice
Summary:
Original Porsche Exhaust Mufflers:
Designed and manufactured by Porsche for specific models
Engineered to meet stringent quality standards
Precisely tuned for optimal performance and sound
Maintains the authenticity and originality of your Porsche
Compatible with existing components and systems
Aftermarket Exhaust Mufflers:
Produced by third-party manufacturers specializing in performance upgrades
Offer a wide range of options for customization
Can enhance exhaust note, performance, and aesthetics
May provide better flow dynamics for improved engine efficiency
Consider compatibility and fitment with your Porsche model
Sports Exhaust Systems:
Designed to maximize performance and enhance the driving experience
Typically include larger diameter pipes, sportier mufflers, and optimized airflow
Offer increased horsepower and torque
Produce a more aggressive and exhilarating exhaust sound
Check local regulations regarding noise restrictions
When considering purchasing an exhaust muffler or sports exhaust for your Porsche, several factors should be considered. Firstly, determine your specific requirements, whether it's a slight improvement in sound or a significant performance boost. Research the technical specifications and compatibility of the chosen exhaust system with your Porsche model. Consider your budget and the reputation of the manufacturer or retailer. It's crucial to ensure the product is backed by warranties or guarantees.
At Design911, we can assist you in finding the correct exhaust part for your Porsche. Our knowledgeable team can offer professional advice based on your requirements and guide you through the selection process. We stock a wide range of original Porsche parts as well as reputable aftermarket options, ensuring you have access to high-quality choices. Trust Design911 to help you enhance your Porsche's performance and provide an unmatched driving experience.
Note: The summary provided above is a general overview of the benefits and considerations related to upgrading the exhaust system of a Porsche vehicle. It's always recommended to consult with a professional and consider individual vehicle specifications and regulations before making any modifications.