Tarett
大约Tarett
Established in 1995, Tarett Engineering Inc. is a premier supplier of competition suspension components for the Porsche racing community. We started this because of our passion for the marque and a need in the market. Tarett Engineering designs and manufactures high-performance suspension components for both club and professional auto racing. We use aircraft-quality materials and hold the highest quality standards to provide our customers with products they can depend on to last and perform up to and beyond their expectations.
Our goal is to provide our customers with high quality performance products at reasonable prices. You can be confident that all our products are fully engineered and tested to meet this goal.
Front tie rod, Motorsport Style. Porsche 986/996/987/997/981/718
代码: 991.008.CLAMP
Tarett Engineering is proud to be able to provide these new Motorsport style tie rods. Inspired by the Porsche Motorsport design. This no compromise design is hands down the best tie rod kit on the market.
Sold as a single unit, two required per car.
Fits all Porsche 986/996/987/997/981/718 models.
Pinch Style Locking Design: Provides easy alignment compared to the typical jamb nut designs that tend to shift when you lock them down. Several tedious iterations are usually needed to get it right. The pinch style design allows you to simply set toe and lock it down with no shifting and resetting required. It also allows for a significantly increased adjustment range.
Bump Steer Optimized & Adjustable: The attachment to the wheel carrier is raised more than any other kit on the market, thus maximizing bumpsteer reduction. Spacers can be added as needed to adjust bump steer, but most applications require raising the attachment point to reduce bumpsteer.
High Quality Rod Ends: Precision grade 3-piece Teflon lined spherical rod ends replace the compliant factory rubber bushing for improved suspension response and feedback, and also reduces toe changes under acceleration and deceleration. The result is improved rear end stability and control. The rod ends are oversized for high strength and long life, and have a fine thread for more precise adjustability. The Teflon liner is self-lubricating for smooth and quiet operation, and long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
991.008.CLAMP
您正在查看的产品与这些编号存在交叉引用关系
Sold as a single unit, two required per car.
Fits all Porsche 986/996/987/997/981/718 models.
Pinch Style Locking Design: Provides easy alignment compared to the typical jamb nut designs that tend to shift when you lock them down. Several tedious iterations are usually needed to get it right. The pinch style design allows you to simply set toe and lock it down with no shifting and resetting required. It also allows for a significantly increased adjustment range.
Bump Steer Optimized & Adjustable: The attachment to the wheel carrier is raised more than any other kit on the market, thus maximizing bumpsteer reduction. Spacers can be added as needed to adjust bump steer, but most applications require raising the attachment point to reduce bumpsteer.
High Quality Rod Ends: Precision grade 3-piece Teflon lined spherical rod ends replace the compliant factory rubber bushing for improved suspension response and feedback, and also reduces toe changes under acceleration and deceleration. The result is improved rear end stability and control. The rod ends are oversized for high strength and long life, and have a fine thread for more precise adjustability. The Teflon liner is self-lubricating for smooth and quiet operation, and long life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
991.008.CLAMP
991.008.CLAMP
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GT4 718 4.0L / GT4 RS 718 4.0L
€293.93 含 VAT
当前 €288.05 含 VAT
库存
Brake cooling kit. Porsche 944 82-88
代码: PEOSBPAZK
Brake Cooling Kit. For use with factory vented rotors only.
Fits:
Porsche 944 (1982-88)
Improve your braking system with this high quality bolt on cooling kit. The additional cooling will significantly reduce brake fade and rotor wear.
The kit comes complete with:
- anodized aluminum backing plates,
- intake scoops,
- 500 deg silicon hose,
- stainless steel hose clamps,
- tie wraps,
- and detailed step by step installation instructions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PEOSBPAZK
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 944 (1982-88)
Improve your braking system with this high quality bolt on cooling kit. The additional cooling will significantly reduce brake fade and rotor wear.
The kit comes complete with:
- anodized aluminum backing plates,
- intake scoops,
- 500 deg silicon hose,
- stainless steel hose clamps,
- tie wraps,
- and detailed step by step installation instructions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PEOSBPAZK
94435108501
95135180500
95135180600
PEOSBPAZK
94435108500
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944 Turbo 2.5L 8V 1985-88
€564.06 含 VAT
当前 €552.78 含 VAT
库存
Rear Monoball Shock Mount FLAT STYLE. Porsche 986/987/981 Tarett
代码: 98XRSMT
Rear Monoball Shock Mount. Sold as pair.
FLAT STYLE
Fits:
Porsche 986 / 987 / 981 / 982
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for quicker steering and shock response, and increased suspension precision resulting in better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which tend to cause annoying rattling and possible failure.
Available in two styles, domed and flat.
• The domed style is designed to replace the OEM mount and is compatible with any strut designed for use with the OEM mount. This would include Bilstein and KW among others. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
• The flat mounts are designed for use with race style struts that are intended to be used with a flat mount. This would include JRZ, Moton, MCS, and AST among others.
Note: that the two are not interchangeable. Please consult Tarett Engineering if you are unsure which is appropriate for your application.
• Precision monoball bearing, positively clamped in position.
• CNC machined housing.
• No bearing noise.
• Spring load distributed on housing
• Fully compatible with factory and aftermarket spring seats.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
98XRSMT
您正在查看的产品与这些编号存在交叉引用关系
FLAT STYLE
Fits:
Porsche 986 / 987 / 981 / 982
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for quicker steering and shock response, and increased suspension precision resulting in better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which tend to cause annoying rattling and possible failure.
Available in two styles, domed and flat.
• The domed style is designed to replace the OEM mount and is compatible with any strut designed for use with the OEM mount. This would include Bilstein and KW among others. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
• The flat mounts are designed for use with race style struts that are intended to be used with a flat mount. This would include JRZ, Moton, MCS, and AST among others.
Note: that the two are not interchangeable. Please consult Tarett Engineering if you are unsure which is appropriate for your application.
• Precision monoball bearing, positively clamped in position.
• CNC machined housing.
• No bearing noise.
• Spring load distributed on housing
• Fully compatible with factory and aftermarket spring seats.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
98XRSMT
981RSMT
98733305900
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
€427.21 含 VAT
当前 €418.67 含 VAT
库存
Adjustable control arm front. Porsche 991 / 981 Boxster / 981 Cayman
代码: 991010
Adjustable control arm front. Sold as EACH. Two per axle. Replacement for 99134104303
Fits:
Porsche 991 2012>> FRONT only
Porsche 981 Boxster 2012>> FRONT only
Porsche 981 Cayman 2013>> FRONT Only
FEATURES:
These are direct replacements for the factory thrust arms, and will improve handling in addition adding precision caster adjustability.
Spacers included for setting stock or anti-squat and anti-dive configurations.
A precision Teflon lined spherical rod end replaces the compliant factory rubber bushing for improved suspension response and feedback. The result is improved stability and control.
The adjusting link has a left and right hand thread on each end. Rotating the link will precisely increase or decrease the overall length of the arm.
Two links required per car for 986/987/996/997/981/991 front, and two for 996/997/986/987/981 rear suspensions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
991010
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 991 2012>> FRONT only
Porsche 981 Boxster 2012>> FRONT only
Porsche 981 Cayman 2013>> FRONT Only
FEATURES:
These are direct replacements for the factory thrust arms, and will improve handling in addition adding precision caster adjustability.
Spacers included for setting stock or anti-squat and anti-dive configurations.
A precision Teflon lined spherical rod end replaces the compliant factory rubber bushing for improved suspension response and feedback. The result is improved stability and control.
The adjusting link has a left and right hand thread on each end. Rotating the link will precisely increase or decrease the overall length of the arm.
Two links required per car for 986/987/996/997/981/991 front, and two for 996/997/986/987/981 rear suspensions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
991010
991010
99134104303
99134104301
99134104303
9913410430
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
€315.35 含 VAT
当前 €309.04 含 VAT
库存
Adjustable control arm Porsche 986 / 996 / 997 GT3. Porsche 996 / 997 / Boxster 986/987 / Cayman 987
代码: 996010
Adjustable control arm, Replacement for OE 99634104306, 99733104301,
Motorsport Product
Fits:
Porsche 996 1998-04 FRONT & REAR
Porsche 997 2005>> FRONT & REAR
Porsche 986 Boxster 1997-05 FRONT only
Porsche 987 Boxster 2005>> FRONT only
Porsche 987 Cayman 2005>> FRONT only
FEATURES:
These are direct replacements for the factory thrust arms, and will improve handling in addition adding precision caster adjustability.
Spacers included for setting stock or anti-squat and anti-dive configurations.
A precision Teflon lined spherical rod end replaces the compliant factory rubber bushing for improved suspension response and feedback. The result is improved stability and control.
The adjusting link has a left and right hand thread on each end. Rotating the link will precisely increase or decrease the overall length of the arm.
Two links required per car for 986/987/996/997/981/991 front, and two for 996/997/986/987/981 rear suspensions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
996010
您正在查看的产品与这些编号存在交叉引用关系
Motorsport Product
Fits:
Porsche 996 1998-04 FRONT & REAR
Porsche 997 2005>> FRONT & REAR
Porsche 986 Boxster 1997-05 FRONT only
Porsche 987 Boxster 2005>> FRONT only
Porsche 987 Cayman 2005>> FRONT only
FEATURES:
These are direct replacements for the factory thrust arms, and will improve handling in addition adding precision caster adjustability.
Spacers included for setting stock or anti-squat and anti-dive configurations.
A precision Teflon lined spherical rod end replaces the compliant factory rubber bushing for improved suspension response and feedback. The result is improved stability and control.
The adjusting link has a left and right hand thread on each end. Rotating the link will precisely increase or decrease the overall length of the arm.
Two links required per car for 986/987/996/997/981/991 front, and two for 996/997/986/987/981 rear suspensions.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
996010
996010
99634104306
99733104301
99634114303
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
€359.38 含 VAT
当前 €352.19 含 VAT
库存
Dust boots small for rod ends. Porsche 986 / 996 / 987 / 997 / 981 / 991
代码: REBOOTSMALL
Dust Boots for Rod Ends.
Size: will fit 3/8", 7/16" and 10mm, 12mm rod ends.
Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3
Porsche 986 Boxster / Boxster S
Porsche 987 Boxster / Boxster S
Porsche 987 Cayman / Cayman S
Porsche 991 C2, C2S, C4, C4S, Turbo, GT2, GT3
Porsche 981 Boxster / Boxster S
Porsche 981 Cayman / Cayman S / Cayman GT4
1 boot per rod end. Sold separately.
Size: will fit 3/8", 7/16" and 10mm, 12mm rod ends.
Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3
Porsche 986 Boxster / Boxster S
Porsche 987 Boxster / Boxster S
Porsche 987 Cayman / Cayman S
Porsche 991 C2, C2S, C4, C4S, Turbo, GT2, GT3
Porsche 981 Boxster / Boxster S
Porsche 981 Cayman / Cayman S / Cayman GT4
1 boot per rod end. Sold separately.
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
€11.90 含 VAT
当前 €11.66 含 VAT
库存
Light weight hollow rear torsion bar. Porsche 911 65-86
代码: 1S166911R
Light weight hollow rear torsion bar. (SET OF 2)
Fits:
Porsche 911 65-86 Rear
Available in 6 sizes:
- 26mm
- 27mm
- 28mm
- 29mm
- 31mm
- 33mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Centre less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1S166911R
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 65-86 Rear
Available in 6 sizes:
- 26mm
- 27mm
- 28mm
- 29mm
- 31mm
- 33mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Centre less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1S166911R
1S166911F21
91133310103
91133310203
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
价格低至: €553.94 含 VAT
Light Weight Hollow Front Torsion Bar 911 / 914-6
代码: 1S166911F
Chrome Moly Light Weight Hollow Front Torsion Bar (SET OF 2)
- 21mm
- 22mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Center less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1S166911F
您正在查看的产品与这些编号存在交叉引用关系
- 21mm
- 22mm
Tighten up your suspension with these high precision, light weight, hollow torsion bars.
Fabricated from aircraft quality 4130 chrome moly steel, and heat treated for high strength and reliability.
Zinc plated with plugged ends for superior corrosion resistance.
Precision machined splined ends for a perfect fit.
Center less ground and gun drilled for a consistent spring rate.
Lighter weight compared to solid bars with an equivalent stiffness. Up to 3 lbs lighter per bar!
These are the highest quality bars on the market.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
1S166911F
1S166911F21
1S166911F22
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
价格低至: €536.45 含 VAT
Rear Spring Plates, Set Of 2. Porsche 964 / 993
代码: 964RSPLT
Rear Spring Plates, SET OF 2.
Porsche 964
Porsche 993
This kit replaces the factory spring plates and compliant rubber bushings with a precision rod end that allows for friction free movement and easy adjustment of toe angles without affecting camber.
Please note original Porsche spring plates OE Numbers 96433106008 / 96433106010 are no longer available, so these are a great alternative.
The precision rod end also improves driver feedback and maintains alignment settings for better handling.
The plates are fabricated from alloy steel and nickel plated for strength and corrosion resistance.
Allows for camber settings up to -4.5 deg. Mount with slot on top for camber angle more than -1.5 deg.
Motorsport Product.
Price is SET OF 2
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
964RSPLT
您正在查看的产品与这些编号存在交叉引用关系
Porsche 964
Porsche 993
This kit replaces the factory spring plates and compliant rubber bushings with a precision rod end that allows for friction free movement and easy adjustment of toe angles without affecting camber.
Please note original Porsche spring plates OE Numbers 96433106008 / 96433106010 are no longer available, so these are a great alternative.
The precision rod end also improves driver feedback and maintains alignment settings for better handling.
The plates are fabricated from alloy steel and nickel plated for strength and corrosion resistance.
Allows for camber settings up to -4.5 deg. Mount with slot on top for camber angle more than -1.5 deg.
Motorsport Product.
Price is SET OF 2
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
964RSPLT
3602609641
96433106008
96433106010
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
€1,037.68 含 VAT
当前 €1,016.93 含 VAT
库存
Rear Monoball Shock Mount - Set Of 2 for Porsche Boxster 986 / 987
代码: 986RSMT
Rear Monoball Shock Mount - Set of 2 for Porsche Boxster 986 / 987
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
Precision monoball bearing, positively clamped in position.
CNC machined housings.
No bearing noise.
Spring load distributed on housing.
Fully compatible with factory and aftermarket spring seats.
Fits
Porsche Boxster 986
Porsche Boxster 987
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
986RSMT
您正在查看的产品与这些编号存在交叉引用关系
The compliant factory rubber bushing is replaced with a precision Teflon-lined spherical bearing for increased suspension rigidity, quicker steering response, and better handling. The spherical bearing is made to our specific specifications, and will not wear out and rattle like others on the market. The housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. The spherical bearing is securely clamped into the billet housing. Other designs use a small retainer ring to trap the bearing in a bore, which could cause annoying rattling and possible failure. The spring load is distributed on the housing, not the monoball, for increased monoball life. These are the only upper mounts on the market that are fully compatible with all factory and aftermarket style upper spring seats.
Precision monoball bearing, positively clamped in position.
CNC machined housings.
No bearing noise.
Spring load distributed on housing.
Fully compatible with factory and aftermarket spring seats.
Fits
Porsche Boxster 986
Porsche Boxster 987
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
986RSMT
986RSMT
98733305900
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
€603.33 含 VAT
当前 €591.26 含 VAT
库存
Spacer block rear swaybar bearing block for Porsche 911 G50 or 930 Trans (each)
代码: RBLKSPR1
Spacer Block Rear Swaybar Bearing Block.
Fits with product code RSBA22E
These spacers mount between the rear swaybar bearing blocks to drop the swaybar down by .375". Required for all G50 and 930 transmission cars, to allow for the swaybar to clear the transmission.
Two required.
Fits with product code RSBA22E
These spacers mount between the rear swaybar bearing blocks to drop the swaybar down by .375". Required for all G50 and 930 transmission cars, to allow for the swaybar to clear the transmission.
Two required.
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€21.29 含 VAT
当前 €20.86 含 VAT
库存
U-Bracket Adapter (pair) for Front Swaybar Kit 911/912/930 (1974-89)
代码: SBRFADP2
Required when fitting FSBA22 Front Anti Roll Bar & Adjustable Drop Links Kitfor Porsche 911 1974-89
Fits with product code FSBA22
Fits with product code FSBA22
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€51.27 含 VAT
当前 €50.24 含 VAT
库存
Nut Plate Adapter (pair) for Front Swaybar Kit Porsche 911/912/930 (1974-89)
代码: SBRFADP1
Required when fitting FSBA22 Front Anti Roll Bar & Adjustable Drop Links Kit for Porsche 911 1974-89.
Fits with product code FSBA22
Fits with product code FSBA22
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€73.23 含 VAT
当前 €71.77 含 VAT
库存
Rear 22mm anti roll bar & adjustable drop links kit. Porsche 911 1978-89
代码: RSBA22L
Rear 22mm Anti Roll Bar & Adjustable Drop Links Kit.
Fits:
Porsche 911 1978-89
The light-weight hollow sway bars are half the weight of a 22mm solid bar with the same stiffness. They are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability. Bearing blocks, drop links, and swaybar arms are CNC machined from aircraft-quality 6061-T6 aluminum for its high strength/weight ratio. Fully adjustable front and rear drop links to eliminate suspension preload. Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. All necessary hardware is provided in zinc plated metric class 8.8 The adjustable drop-link arm connection design provides an infinitely adjustable swaybar stiffness rate and makes it quick and easy to fine-tune your car's handling for various track conditions and driving styles. Thermoplastic bushings impregnated with Teflon and reinforced with Kevlar provide smooth operation, long life, and high resistance to deflecting under heavy loading. Superior ground clearance. Compair the competition. Optimized geometry for bind free operation throughout the entire suspension range of travel. All components are designed and manufactured to the highest quality standards, resulting in the finest and most reliable swaybar on the market.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSBA22L
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 1978-89
The light-weight hollow sway bars are half the weight of a 22mm solid bar with the same stiffness. They are fabricated from aircraft-quality 4130 chrome moly alloy steel and heat treated to maximize strength and reliability. Bearing blocks, drop links, and swaybar arms are CNC machined from aircraft-quality 6061-T6 aluminum for its high strength/weight ratio. Fully adjustable front and rear drop links to eliminate suspension preload. Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. All necessary hardware is provided in zinc plated metric class 8.8 The adjustable drop-link arm connection design provides an infinitely adjustable swaybar stiffness rate and makes it quick and easy to fine-tune your car's handling for various track conditions and driving styles. Thermoplastic bushings impregnated with Teflon and reinforced with Kevlar provide smooth operation, long life, and high resistance to deflecting under heavy loading. Superior ground clearance. Compair the competition. Optimized geometry for bind free operation throughout the entire suspension range of travel. All components are designed and manufactured to the highest quality standards, resulting in the finest and most reliable swaybar on the market.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
RSBA22L
90133370104
91134370313
91134370310
91133370101
91134370313
91133370111
93033370123
9303337012
930333701
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€673.54 含 VAT
当前 €660.07 含 VAT
库存
Front Monoball Camber Plates (Pair). Porsche 911 1965-89
代码: STRTMNT
Front Monoball Camber Plates. SET OF 2.
Replacement for 91134101800, 90134101801.
Fits:
Porsche 911 1965-89
Porsche 912
Porsche 930
All necessary hardware is supplied in metric class 8.8.
Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing. The spherical shaped housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. Increases front suspension rigidity for quicker steering response and better handling. Offset mounting holes, the narrower housing, and a smaller bearing boss all allow for more camber adjustment than any other strut mount on the market. Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction. Fully compatible with coil over or torsion bar front suspensions. Easily bolts on with no drilling or welding required.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
STRTMNT
您正在查看的产品与这些编号存在交叉引用关系
Replacement for 91134101800, 90134101801.
Fits:
Porsche 911 1965-89
Porsche 912
Porsche 930
All necessary hardware is supplied in metric class 8.8.
Replaces the compliant factory rubber bushing with a precision Teflon-lined spherical bearing. The spherical shaped housing is CNC machined from 6061-T6 aluminum billet, providing high-strength, light weight, and a perfect match to the factory mounting surface. Increases front suspension rigidity for quicker steering response and better handling. Offset mounting holes, the narrower housing, and a smaller bearing boss all allow for more camber adjustment than any other strut mount on the market. Reduces front wheel camber changes during hard cornering to maintain optimum tire contact for improved traction. Fully compatible with coil over or torsion bar front suspensions. Easily bolts on with no drilling or welding required.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
STRTMNT
91134101800
90134101801
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€487.90 含 VAT
当前 €478.14 含 VAT
库存
显示从1到15(共15个产品)