防侧翻杆衬套
前桥和后桥
适合:
保时捷 911E - 1970 年至 1973 年
保时捷 911T - 1970 年至 1973 年
保时捷 911S - 1970 年至 1973 年
采用标准岸级(未升级)的悬架衬套重建套件
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
适合:
保时捷 911E - 1970 年至 1973 年
保时捷 911T - 1970 年至 1973 年
保时捷 911S - 1970 年至 1973 年
采用标准岸级(未升级)的悬架衬套重建套件
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
防倾杆 (ARB) 在车辆的悬架系统中发挥着重要作用,它通过将转弯载荷从车辆的一侧转移到另一侧来帮助减少车身侧倾。
这些衬套通常用橡胶衬套安装在车辆底盘上,确保防倾杆按预期工作。为了防止防倾杆在转弯时在其支架内横向移动,OE 制造商要么将衬套粘合到防倾杆上,要么在防倾杆本身上添加死止动装置,要么仅依靠橡胶的夹紧压力。
但是当这些衬套磨损并需要更换时会发生什么?带有粘合衬套的防倾杆通常是一个昂贵的完整组件,因此替代方案是安装更具成本效益的非粘合聚氨酯替代品,就像我们提供的许多产品一样。
在大多数情况下,衬套的摩擦力会阻止防倾杆左右移动。但是,当急转弯或以较高速度转弯时,横向移动的防倾杆会降低防倾杆的效率和效果,从而以不可预测的方式改变悬架系统的动态。这还存在防倾杆污染车辆或悬架系统其他区域的风险。
Fits:
Porsche 911 1965-73
This kit includes
1 X SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 X SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 X SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 X SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1 X SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 X SPF1375K Rear Engine Mounting Bush Kit 8 Bushes, 4 Steel Tubes, SuperPro Grease
1 X SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 X SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 X SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 X SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
SET OF 4
Rear stabilizer bar bush - 15mm.
Rear drop link bush - 15mm.
Fits - left and right side.
Fits:
Porsche 911 1965-1973 Rear
Porsche 914 1970-1976 Rear
Note: Please check anti roll bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-412-15
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Drop link bush Rear - 15mm.
Fits - left and right side. Sold each.
Fits:
Porsche 911 1965-73 Rear
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90133379303
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Drop link bush rear - 15mm.
Fits - left and right side. Sold each.
Fits:
Porsche 911 1965-73 Rear
Click 'Zoom in' for large parts diagram.
Diagram ref no 2.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90133379303
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
SET OF 2.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 911 1965-98
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 928 1978-95
Porsche 356 1950-65
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-209-
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
Sold per pair, 1 pair req'd per car.
Fits:
Porsche 911/912/930 1965-89
Prevent or repair common failure point.
Elephant Racing Swaybar Mount Reinforcement Panels will help prevent or repair the common problem of cracked swaybar mounts resulting from the application of overly stiff, binding, or incorrectly adjusted aftermarket swaybars.
Elephant Racing Swaybar Mount Reinforcement Panels are precision laser-cut from18 gauge steel. They distribute the swaybar loads into the bulkhead and double-layer sheet metal just beyond the original single-layer hole location.
You may also be interested in an upgrade to Elephant Racing's QuickChange Blade Style Swaybar which mounts to the chassis using spherical bushings that articulate or "float" ensuring no binding. Spherical bushings allow mounts to automatically re-align themselves when the chassis is flexing under load. We believe this binding plays a significant role in the mount's failure.
Installation requires welding
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2270026
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 / 912 / 930 1969-89
Porsche 914 1970-76
Required when installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.
• Required For Thru-Body Swaybar Conversions
• Not required for Elephant Racing Blade Type Swaybars
• Welding required for proper installation
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2270025
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)