座椅翻新

Complete leather restoration kit for the 2 front seats of Porsche 911 models 1977-1984 (late pre-SC models, Carrera 3.0, SC and early Carrera 3.2 models), available for Standard and Sport seats.

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Please state whether you have Standard or Sport seats. Sport seat have higher bolsters. The best way to distinguish is to measure the side of the back rest. At the widest point, the Regular seat measures 12.5cm (5") whereas the Sport seat measures 17.5 cm (7").

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911521

您正在查看的产品与这些编号存在交叉引用关系

Front Seat Bottom Cushion for Comfort Seat
(will not fit Sport seats)



Fits:
Porsche 911 1977-84
Porsche 928 1980-82

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91152138

您正在查看的产品与这些编号存在交叉引用关系

Front Seat Bottom Cushion for Comfort Seat
(will not fit Sport seats)



Fits:
Porsche 911 1977-84
Porsche 928 1980-82

Please note: These cushions are not handed and will fit Left or Right side seats.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91152138502

您正在查看的产品与这些编号存在交叉引用关系

适用于所有配备标准（舒适型）座椅的 1985-1993 年保时捷 911 车型的座椅底座泡沫（左和右）（2 套）。这些座椅底座泡沫在形状和密度方面均按照 OEM 规格模制而成。

我们建议将这些座椅底座泡沫与我们的前座套结合使用。它们共同保证了与原厂座椅完美贴合。仅成对出售。

不适合加热座椅。

适合：
保时捷 911 / 964 1985-93 年

单击“放大”可查看大部件图。
图表参考编号 2

Complete front seat restoration kit for the 2 front seats of Porsche 911 1974-1976 can also fit up to 1984 (early G models) with standard seats.
Vinyl.



The seats have perforated centres, the set includes to seat and back rest covers to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91152107200

您正在查看的产品与这些编号存在交叉引用关系

Complete leather restoration kit for the 2 front seats of all Porsche 911 models from 1985-1989 and all 964 models 1989-1993, available for Standard and Sport seats.

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Upon completion of the auction, please state whether you have Standard or Sport seats. Sport seat have higher bolsters. The best way to distinguish is measure the side of the back rest. At the widest point, the Regular seat measures 12.5cm (5") whereas the Sport seat measures 17.5 cm (7").

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Interior Restoration Kit for Porsche 911 Coupe 1974–1989.

Our Standard Interior Restoration Kit for the Porsche 911 Coupe (3.0 SC '77-'83 and Carrera 3.2 '84-'89
models) includes everything you typically need to bring your interior back to factory new condition:

• Complete Carpet Set, OEM sliverknit, (19/21 pieces, Diagram ref 1)
• Door Panels, Ready-To-Install, pair (Diagram ref. 2)
• Leather Front Seat Restoration Kit, pair (standard/sports, Diagram ref. 4)
• Leather Rear Seat Restoration Kit, pair (Diagram ref. 5)
• Trunk Carpet set in OEM Perlon felt or Sliverknit (Not indicated)
• Rear Bulkhead Retrim Kit (Diagram ref. 6)
• Rear quarter Panel Retrim Kit, pair (Diagram ref. 7)
• Leather gearstick Gaiter/ shift boot (Carrera 3.2 only, Diagram ref. 8)
• B-pillar Retrim Kit, pair (Diagram ref. 9)
• Headlining Kit (Not indicated)
• Additional Leather, 1m²
• Complete step-by-step installation instructions and pictures

Following parts are not included in the standard kit, but can be ordered additionally (for beltline retrimming and full leather interiors):

• Leather Dashboard Retrim Kit

• Leather Door Cap Retrims (pair) front (Diagram ref. 3)

• Leather Rear quarter upper Retrims (pair) rear (Diagram ref. 3)

• Leather Knee Protector Retrim Kit (3 pieces)

• Leather Armrest and Door Pocket Cover Retrim kit with ‘signature’ topstitching

Following parts are not included in the standard kit (can be ordered separately):

• Complete New Door Pockets, pair (OEM specification)

• Complete New Dashboard (OEM specification)

• Complete New Knee Protectors (3 pieces)

• Complete New Door Caps (pair)

• Complete New Rear Backwall / Parcelshelf

• Complete New Rear Quarter Panels

• Replacement Seat Base Foams (pair)

• A-pillar Retrim Kit

• Roll Bar Retrim kit incl. vents (Targa)

For more information: CLICK HERE

For Installation Instructions. Interior carpet set Porsche 1969-89 CLICK HERE

For Installation Instructions. Targa Top Restoration Kit Porsche 911 1965-1993 CLICK HERE

For Installation Instructions. Seat Kit Porsche 911 1974-93 CLICK HERE

For Installation Instructions. B-Post retrim Porsche 911 – all models CLICK HERE

Rear Seat base fillings in horsehair (2 Seats).

Fits:
Porsche 911/ 964 1965-93

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90152100020

您正在查看的产品与这些编号存在交叉引用关系

Complete rear restoration kit for the 2 rear seats of Porsche 911 and 964 models 1974-1989, available for Coupe, Targa and Cabriolet models, in leather or leatherette.

Our rear seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your rear seats back to factory new condition; 2 back rest covers, 2 seat base covers, 2 bolster cover pairs and correction foam for seat base.

We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new horsehair. New horsehair or rear bolster cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the rear seat restoration kit in Black and selected colors only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order

Complete leather restoration kit for the 2 front seats of Porsche 911 models 1974-1984 with original Recaro sport seats (pre-SC models, Carrera 3.0, SC and early Turbo models).

The easiest way to distinguish a sport seat from a standard (comfort) seat is to measure the side of the back rest. At the widest point, the comfort seat measures 12.5cm (5") whereas the sport seat measures 17.5 cm (7").

Our leather seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with Porsche PoN perforation for the center sections, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base bolsters. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Download the detailed installation instructions

Delivery Time is Normally 4-6 weeks on this product as this is made to order