后履带控制臂
按车型类型筛选
按品牌过滤
Adjustable front caster arms with anti-dive / anti-squat. Porsche 981 / 991
代码: 2180032
Adjustable front caster arms with anti-dive / anti-squat.
1 kit required per car
Fits:
Porsche 981 Boxster - Front Only
Porsche 981 Cayman - Front Only
Porsche 991 - Front Only
You have to exchange the control arm central bush to accommodate the fork arm. (bought separately)
Elephant Racing caster arms provide adjustable caster and anti-dive ability when used on the front
Front Suspension
Threaded double-adjuster makes it easy to extend or shorten the arm.
This makes for easy caster adjustment – an important adjustment the factory left out. A must-have for cars with GT3 style extendable style lower control arms to correct for un-intended caster increase that is caused by the extended LCAs.
Anti-dive behavior can also be adjusted. Lowering the front of the arm using the provided spacers reduces front dive under braking. Adjustable in 2mm increments.
Fully weather sealed – Proper boots at the heim joint keep water and contaminant out for extended life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2180032
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits:
Porsche 981 Boxster - Front Only
Porsche 981 Cayman - Front Only
Porsche 991 - Front Only
You have to exchange the control arm central bush to accommodate the fork arm. (bought separately)
Elephant Racing caster arms provide adjustable caster and anti-dive ability when used on the front
Front Suspension
Threaded double-adjuster makes it easy to extend or shorten the arm.
This makes for easy caster adjustment – an important adjustment the factory left out. A must-have for cars with GT3 style extendable style lower control arms to correct for un-intended caster increase that is caused by the extended LCAs.
Anti-dive behavior can also be adjusted. Lowering the front of the arm using the provided spacers reduces front dive under braking. Adjustable in 2mm increments.
Fully weather sealed – Proper boots at the heim joint keep water and contaminant out for extended life.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2180032
2180032
99134104301
99134104305
99134104302
99134104306
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Boxster Spyder 3.8L 2016
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
€850.85 含 VAT
当前 €833.83 含 VAT
由供应商供货
Adjustable rear lower wishbone. Porsche 991 2012 onwards
代码: 2180012
Pair of adjustable rear lower wishbones.
1 pair required per car
Fits
Porsche 991 2012 Onward - Rear Only
We've developed 991 Rear Adjustable Wishbone to provide the camber and precision you need. Machined from billet aluminum, hard anodized and fully weather sealed, this arms are strong enough for track and durable enough for extended street use.
Easy Camber Adjustment – The double adjuster makes fast and precise camber changes in minutes. Dialing in your race car, or adding camber for the occasional track day is now a simple operation.
Camber Range – Extended range of adjustment lets you get aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.
Porsche 991 adjustable rear lower wishbone detail
Heim Joint – Eliminate suspension deflection associated with rubber compression. For superior driving precision, spherical bearing type heim joints are used instead of the rubber bushings that are found in OEM control arms. The arms are fully rebuildable with replaceable heim joints.
Fully Weather Sealed – Rubber boot protects the heim joint to keep water and contaminant out for extended life.
The kit includes both rear lower wishbones. Order one kit per car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2180012
您正在查看的产品与这些编号存在交叉引用关系
1 pair required per car
Fits
Porsche 991 2012 Onward - Rear Only
We've developed 991 Rear Adjustable Wishbone to provide the camber and precision you need. Machined from billet aluminum, hard anodized and fully weather sealed, this arms are strong enough for track and durable enough for extended street use.
Easy Camber Adjustment – The double adjuster makes fast and precise camber changes in minutes. Dialing in your race car, or adding camber for the occasional track day is now a simple operation.
Camber Range – Extended range of adjustment lets you get aggressive camber. Or you can dial it back to get a factory street alignment on lowered cars.
Porsche 991 adjustable rear lower wishbone detail
Heim Joint – Eliminate suspension deflection associated with rubber compression. For superior driving precision, spherical bearing type heim joints are used instead of the rubber bushings that are found in OEM control arms. The arms are fully rebuildable with replaceable heim joints.
Fully Weather Sealed – Rubber boot protects the heim joint to keep water and contaminant out for extended life.
The kit includes both rear lower wishbones. Order one kit per car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2180012
2180012
99133105302
9P1505311
99133105310
99133105321
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€1,428.00 含 VAT
当前 €1,399.44 含 VAT
由供应商供货
Control arm lower, Rear. Porsche 991
代码: 99133104
Control arm lower, Rear.
Fits:
Porsche 991.1 2016 >> (Cars produced from week 45 onwards)
Porsche 991.2 2017>>
Porsche 991 Turbo 2016>> (Cars produced from week 45 onwards)
Click 'Zoom in' for large parts diagram.
Diagram ref no 20
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99133104
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 991.1 2016 >> (Cars produced from week 45 onwards)
Porsche 991.2 2017>>
Porsche 991 Turbo 2016>> (Cars produced from week 45 onwards)
Click 'Zoom in' for large parts diagram.
Diagram ref no 20
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99133104
99133104420
99133104320
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
价格低至: €209.05 含 VAT
Control arm mount, rear axle. Porsche 991 R / GT3 / GT3 RS 2014>>
代码: 9913313
Control arm mount, rear axle.
Fits:
Porsche 991 R / GT3 / GT3 RS 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 27
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9913313
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 991 R / GT3 / GT3 RS 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 27
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
9913313
99133133080
99133132980
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
价格低至: €161.03 含 VAT
Control arm upper, Rear. Porsche 991
代码: 99133106104
Control arm upper, Rear. Fits left and right side.
Fits:
Porsche 991.1 2012-16
Porsche 991.2 2017>>
Porsche 991 Turbo 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99133106104
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 991.1 2012-16
Porsche 991.2 2017>>
Porsche 991 Turbo 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99133106104
99133106104
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
价格: €195.06 含 VAT
由供应商供货
Control arm upper, Rear. Porsche 991 R / GT3 / GT3 RS
代码: 99133106180
Control arm upper, Rear.
Fits:
Porsche 991 R / GT3 / GT3 RS 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99133106180
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 991 R / GT3 / GT3 RS 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99133106180
99133106180
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
价格: €338.31 含 VAT
由供应商供货
Rear lower control arm. Porsche 991 GT3 / 991 GT3 RS
代码: 99133104380
Rear lower control arm.
Fits:
Porsche 991 GT3 / 991 GT3 RS 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 25
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99133104380
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 991 GT3 / 991 GT3 RS 2014>>
Click 'Zoom in' for large parts diagram.
Diagram ref no 25
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
99133104380
99133104380
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
价格: €338.31 含 VAT
由供应商供货
Rear suspension dogbone arm set. Porsche 991 and Turbo BBi Autosport
代码: BBIDOGBONE991
BBi Autosport rear dogbone arm set.
Fits
991.1 and 991.2 Carrera and Carrera S
991.1 and 991.2 Carrera 4 and Carrera 4S
991.1 and 991.2 GTS
991.1 and 991.2 turbo
Product Description:
The BBi Autosport "Dogbone" Rear arm set upgrades the factory control arms with machined and anodized units designed to house spherical bearings.
The full set replaces the arms with rubber bushings and bring back control, stability and predictability in the suspension - much like the RS models.
These are fully serviceable parts.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BBIDOGBONE991
您正在查看的产品与这些编号存在交叉引用关系
Fits
991.1 and 991.2 Carrera and Carrera S
991.1 and 991.2 Carrera 4 and Carrera 4S
991.1 and 991.2 GTS
991.1 and 991.2 turbo
Product Description:
The BBi Autosport "Dogbone" Rear arm set upgrades the factory control arms with machined and anodized units designed to house spherical bearings.
The full set replaces the arms with rubber bushings and bring back control, stability and predictability in the suspension - much like the RS models.
These are fully serviceable parts.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
BBIDOGBONE991
99133104703
9P1505397A
99133106104
9P1505237B
99133104303
9P1505223B
99133104320
99133104403
9P1505224B
99133104420
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€1,896.68 含 VAT
当前 €1,858.75 含 VAT
由供应商供货
Rear track rod concentric monoballl kit. Porsche 991 and 991 Turbo 2012 onwards
代码: 2260015
Rear track rod concentric monoballl kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear track rod bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out.
These bearings are made to last.
The kit includes 4 monoball bearings. 2 bearings per arm, for both track rods.
Order one kit per car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2260015
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
Monoball Cartridges replace factory rear track rod bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.
High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out.
These bearings are made to last.
The kit includes 4 monoball bearings. 2 bearings per arm, for both track rods.
Order one kit per car
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2260015
2260015
99133106104
9P1505237B
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€888.93 含 VAT
当前 €871.15 含 VAT
由供应商供货
Rear track rod eccentric monoballl kit. Porsche 991 and 991 Turbo 2012 onwards
代码: 2260013
Rear track rod eccentric monoballl kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
This monoball cartridge kit replace the inner and outer track rod bushings.
The inner Eccentric bearings provide increased range of toe adjustment. This is to compensate for increased camber or lowered car that cannot be brought into toe range. The outer concentric bearing replaces the rubber bushing and eliminates deflection due to rubber compression.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out. These bearings are made to last.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2260013
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
Porsche 991 Turbo 2012 Onward - Rear Only
This monoball cartridge kit replace the inner and outer track rod bushings.
The inner Eccentric bearings provide increased range of toe adjustment. This is to compensate for increased camber or lowered car that cannot be brought into toe range. The outer concentric bearing replaces the rubber bushing and eliminates deflection due to rubber compression.
Increasing Camber – Position the eccentric to maximize Lower Wishbone length, adding about .86 degree of negative camber on the rear suspension, .39 degrees on the front suspension. Cost effective for cars that just want extra camber. For even more camber and ease of adjustment, see our GT3 type fully adjustable control arms.
Decreasing Camber – Position the eccentric to minimize Lower Wishbone length. Perfect for lowered cars that have too much negative camber and want to get back to factory camber settings to minimize tire wear on the street. Makes rear camber about .86 degrees more positive, front camber about .39 degrees more positive.
Eccentric bearings are made from hardened steel, plated and weather-sealed to keep road contaminates out. These bearings are made to last.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2260013
2260013
99133106104
9P1505237B
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€821.10 含 VAT
当前 €804.68 含 VAT
由供应商供货
Upper control arms concentric monoball kit. Porsche 991 2012 onwards
代码: 2260007
Rear track rod concentric monoballl kit.
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
These monoball cartridges replace factory rear upper control arm bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes 8 monoball bearings. 2 per arm, for 4 arms total.
Order one kit per car.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2260007
您正在查看的产品与这些编号存在交叉引用关系
1 kit required per car
Fits
Porsche 991 2012 Onward - Rear Only
These monoball cartridges replace factory rear upper control arm bushings with hardened-steel spherical bearings. Spherical bearings allow free motion on multiple axis and eliminate deflection associated with rubber, resulting in more precise holding of toe and camber.High tolerance machined housing allow for simple press fit installation. Correct spacers ensure proper fitment.
Weather Sealed
Monoball housing and spacers are hard anodized for protection. Our proprietary rubber seals keep the precision bearing from road contaminates for extended life of the product.
The kit includes 8 monoball bearings. 2 per arm, for 4 arms total.
Order one kit per car.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2260007
2260007
99133104503
9P1501529
99133104520
99133104703
9P1505397A
9P1505397
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
€1,666.00 含 VAT
当前 €1,632.68 含 VAT
由供应商供货
显示从1到11(共11个产品)
也可在这些页面找到
您可能也喜欢
流行车型