运动弹簧
Lowers car by: 30mm
Fits:
Porsche 993 C2 / C2S 10/1993-1998
Porsche 993 C4 / C4S 10/1993-1998
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
29953-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Please note:
Vehicles fitted with load dependent brake control require separate approval despite of ABE (In countries where approval or the like is required). In any case set brake control to required level after lowering!
Lowers car by: 30mm
Fits:
Porsche 993 C2 / C2S 10/1993-1998
Porsche 993 C4 / C4S 10/1993-1998
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
60953-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Lowers car by: 25mm
Fits:
Porsche 993 Turbo 1994-98
Ultra high performance cars like the Porsche Carrera GT, 996 GT II and GT III are equipped with H&R springs, while Mercedes Benz chose them for its supercar, the CLK DTM AMG which is directly derived from the DTM CLK. The use of high tension steel and the complete certification according to the requirements of DIN EN ISO 9001 allow an enormous flexibility at highest quality.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
29598-1
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Performance Lowering makes your car less top heavy. When combined with SPAX optimised spring rates, you get less body roll, reduced bottoming out and better handling. Most SPAX spring kits are progressively wound. This offers a softer ride at low speeds and a stiffer ride at high speeds, when you need it most.
SPAX springs are manufactured and tested to German TÜV standards but doesn't come with an actual TÜV certificate.
They are made using only the finest Chrome Silicon steel, They are shot peened, oven cured (to prevent sagging) and epoxy powder coated (to give the best possible corrosion resistance).
Safety Reduced body roll, predictable handling and a dependable quality product will help keep you and your car on the road.
Value SPAX's massive buying power, superior manufacturing systems and "Factory Direct" pricing allows you to buy a premium product at what is often below the price of a "budget brand".
Power coated for long life and stunning looks
Lowered and uprated
Top quality chrome silicone springs
Epoxy Powder coated
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 993 C2/C2S Coupe / Cabrio
Porsche 963 C4/C4S Coupe / Cabrio
Porsche 993 3.8L Carrera RS Coupe
Porsche 993 C2 3.6 / 3.7 Targa
Lowers
Front 30mm
Rear 30mm
- Top-Performance Handling
- Lower centre of Gravity - Lowers Vehicle up to 1.5″ (40 mm)
- Progressive spring design
- Excellent ride quality
The Eibach Pro-Kit is the perfect answer for most popular street cars.
It's our legendary spring system that dramatically improves both a vehicle's performance and appearance. Pro-Kit lowers your car's centre of gravity, reducing squat during acceleration, body roll in corners and excessive nosedive under braking.
When combined with Plus-1 or Plus-2 wheels and tyres, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender well clearance, making your car look just as hot as it performs.
Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality.
By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
E7208-140
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Lowers by: 35mm
Fits:
Porsche Carrera 993 1994-97
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3602009931
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Lowers by: 30mm
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3602009932
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
原装保时捷螺旋弹簧和降低悬架弹簧的技术规格:
螺旋弹簧:
- 增强操控和转弯性能
- 提供更好的控制和响应能力
- 允许根据不同的驾驶偏好进行定制
- 降低悬挂弹簧:
- 降低车辆行驶高度,打造更具运动感的外观
- 改善空气动力学并减少阻力
- 增强稳定性并减少车身侧倾
- 保持或略微改善乘坐舒适度
升级至原装保时捷线圈弹簧或降低悬架弹簧的好处:
改进的性能:螺旋弹簧的可调特性允许进行精确调节,使驾驶员能够优化保时捷的操控特性和性能。
增强的美感:降低的悬挂弹簧提供了光滑而强劲的姿态,增强了保时捷的整体外观。
定制选项:使用螺旋弹簧,驾驶员可以微调保时捷的悬架以适应他们的特定驾驶偏好,无论是日常通勤还是赛道上的激情驾驶。
提高安全性:升级为高质量螺旋弹簧或降低悬架弹簧可以增强稳定性,减少车身侧倾,并改善整体控制,从而带来更安全的驾驶体验。
当考虑购买原装保时捷螺旋弹簧或降低悬架弹簧时,需要牢记以下几个因素:
兼容性:确保所选的弹簧是专门为您的保时捷车型和型号设计的。
质量和真实性:选择原装保时捷零件或值得信赖的售后市场配件,以确保可靠性、耐用性和合适性。
专业安装:建议由具有保时捷悬架系统经验的合格技术人员安装弹簧,以确保正确安装和校准。
Design911 专门经营保时捷零件和配件。我们的专家团队可以帮助您找到适合您的保时捷车型的正确螺旋弹簧或降低悬架弹簧。我们提供多种原装保时捷零件和高品质售后替代品。我们的专业员工可以提供个性化的建议和指导,帮助您做出明智的决定,确保您获得最适合您特定要求的零件。相信 Design911 可以帮助您升级保时捷的悬架系统并提升您的驾驶体验。
- 支撑架
- 防侧翻稳定杆
- 前控制臂
- 后控制臂
- 前悬挂连接杆
- 后悬挂连接杆
- 发动机支架
- 变速箱座
- 前侧车顶支架
- 后侧车顶支架
- 转向横拉杆
- 前副车架
- 后副车架
- 气动升降系统
- 防翻架
- DesignTek D220 避震悬架套件
- Bilstein SPORT B6 减震器
- Bilstein SPRINT B8 减震器
- Bilstein B12 调校悬架套件
- Bilstein B14 PSS 避震悬架套件
- Bilstein B16 PSS9/10 高度减震可调避震悬架套件
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins 道路及赛道悬架
- Koni 运动系列
- Koni Special Active 系列
- SuperPro 聚氨酯衬套
- Powerflex 聚氨酯衬套
- Powerflex 黑色系列衬套
- Powerflex 传统系列
- H&R 可调悬架套件
- H&R Cup-Kit 系列运动悬架
- KW 变体 1 Inox 悬架套件
- KW 变体 2 Inox 可调回弹减震悬架
- KW 变体 3 Inox 可调悬架套件
- KW Clubsport 避震悬架套件
- KW Clubsport 避震悬架套件(带车顶支架)
- Sachs 高性能悬架 CSS
- Nitron 汽车系列