前悬挂连接杆

Adjustable drop links.
PAIR, 1 pair required per car



Fits:
Porsche 996 1999-05 FRONT C4
Porsche 997 2005-12 FRONT C4

The ideal swaybar is completely unloaded at static ride height but stock drop links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight and other factors.

A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tires. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first.

These adjustable drop links can completely eliminate swaybar preload by easily adjusting drop link length and therefore swaybar performance will be optimized.

✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Light weight aluminum design
✓ Easy Bolt-on replacement

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2271014

您正在查看的产品与这些编号存在交叉引用关系

Adjustable drop links.
PAIR, 1 pair required per car



Fits:
Porsche 996 1999-05 FRONT With GT3 Swaybar And C4 Upright
Porsche 997 2005-12 FRONT With GT3 Swaybar And C4 Upright


The ideal swaybar is completely unloaded at static ride height but stock drop links almost always preload the swaybar since the car doesn't sit perfectly level due to asymmetries such as driver weight and other factors.

A preloaded swaybar shifts the weight carried by each of the tires, increasing grip on weighted tires at the expense of decreasing grip on un-weighted tires. This shifted weight/grip causes uneven handling in left and right turns, and premature brake lockup since the less-loaded tire locks up first.

These adjustable drop links can completely eliminate swaybar preload by easily adjusting drop link length and therefore swaybar performance will be optimized.

✓ Maintenance-free precision rod ends
✓ Weather-sealed
✓ Light weight aluminum design
✓ Easy Bolt-on replacement

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2271016

您正在查看的产品与这些编号存在交叉引用关系

Dust Boots for Rod Ends.
Size: will fit 3/8", 7/16" and 10mm, 12mm rod ends.

Fits:
Porsche 996 C2, C4, C4S, Turbo, GT2, GT3
Porsche 997 C2, C2s, C4, C4s, Turbo, GT2, GT3
Porsche 986 Boxster / Boxster S
Porsche 987 Boxster / Boxster S
Porsche 987 Cayman / Cayman S
Porsche 991 C2, C2S, C4, C4S, Turbo, GT2, GT3
Porsche 981 Boxster / Boxster S
Porsche 981 Cayman / Cayman S / Cayman GT4

1 boot per rod end. Sold separately.

Powerflex Black Series Front anti roll bar bush 23.5mm.
Sold as a pair

OEM Part Number: 99634379212

Note: Please check anti roll bar diameter before ordering.



Fits:
Porsche 986 Boxster 2.5L 1997-99 *M030 FRONT
Porsche 986 Boxster 2.7L 2000>> *M030 FRONT
Porsche 986 Boxster S 3.2L 2000>> **I029 FRONT

Porsche 987 Boxster 2.7L 2005-08 TIPTRONIC **I029 FRONT

Porsche 996 Carrera 1998-05 C2 COUPE TIPTRONIC FRONT
Porsche 996 Carrera 1998-05 C2 COUPE *M030 FRONT
Porsche 996 Carrera 1998-05 CABRIO FRONT
Porsche 996 Carrera 1998-05 TARGA MANUAL FRONT
Porsche 996 Carrera 1998-05 C4 *M030 FRONT
Porsche 996 Carrera 2001-05 C4S FRONT
Porsche 996 Turbo 2001-05 Standard Chassis FRONT

Porsche 997 MKI Carrera 2005-08 C2 MANUAL **I029 FRONT
Porsche 997 MKI Carrera 2005-08 C4 WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 C4S WITH PASM FRONT
Porsche 997 MKI Carrera 2005-08 TARGA WITH PASM FRONT
Porsche 997 MKI Turbo 2008-09 FRONT

* M030 - Cars with Sport-type chassis
** I029 - Cars with Standard chassis


Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFF57-501-23.5BLK

您正在查看的产品与这些编号存在交叉引用关系

Adjustable Front Drop Links
Use with OHLINS Suspension
SET OF 2
Length: from 33cm (overall)



Fits:
Porsche 996 Carrera C4 / TURBO
Porsche 997 Carrera C4 / TURBO

Upgrade your stock front swaybar with this simple bolt in replacement for the factory drop links.
Left & right hand threaded rodends allow for simple length adjustment to eliminate swaybar preload.

Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends.

Eliminates the factory compliant plastic drop link bushings that deflect under loading and quickly wear out.

High misalignment, stainless steel spacers allow for superior bind free operation and corrosion resistance.

Precisely connects the stock or adjustable swaybar to the front strut assembly for improved feedback and swaybar response.
Overall length is adjustable to accommodate either stock or adjustable swaybar requirements.

Tarett front drop links are the aftermarket links that have been exclusively certified for BSR & 996 Spec racing.

Now available, rod end boots to seal out dirt and moisture. Requires 4 each of L-Boots.


Note for C4 cars: Due to front axle restrictions, the drop links may not reach the stiffest settings on an adjustable front swaybar.

Motorsport Product

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

996TTFDLNK-O

您正在查看的产品与这些编号存在交叉引用关系

Front Droplink Set.



Porsche 996T / 996 C4
Porsche 997T / 997 C4

Upgrade your stock front swaybar with this simple bolt in replacement for the factory drop links. These drop link are cnc machined billet 6061 aluminum and angled to fit 997TT/ 996C4 / 997TT /997C4 w/factory struts or Bilstein PSS9 and PSS10's. Left & right hand threaded rodends allow for simple length adjustment to eliminate swaybar preload.

Correctly sized, precision, Teflon-lined rod-ends for smooth and quiet operation, long life, and high reliability. No wear and rattling problems, like those seen with other designs, due to undersized or low quality rod ends. Eliminates the factory compliant plastic drop link bushings that deflect under loading and quickly wear out. High misalignment, steel spacers allow for superior bind free operation and corrosion resistance. Precisely connects the stock or adjustable swaybar to the front strut assembly for improved feedback and swaybar response. Overall length is adjustable to accommodate either stock or adjustable swaybar requirements.

Note: Pictures may not show actual product.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S44

您正在查看的产品与这些编号存在交叉引用关系