摇臂及衬套
Fits OE Wishbone Front (A-Frame) part numbers 91134190100 /91134190200.
SET OF 4 BUSHES
Fits:
Does not fit models made before 1969, fits all models 1969 to 1989.
Porsche 911 1969-89
Porsche 912
Porsche 914 1970-76
Fits to No. 14 on the diagram
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-401H
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits OE Wishbone Front (A-Frame) part numbers 91134190100 / 91134190200.
SET OF 4 BUSHES
Fits:
Does not fit models made before 1969, fits all models 1969 to 1989.
Porsche 911 1969-89
Porsche 912
Porsche 914 1970-76
Fits to No. 14 on the diagram
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-401BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits OE Wishbone Front (A-Frame) part numbers 91134190100 /91134190200.
SET OF 4 BUSHES
Fits:
Does not fit models made before 1969, fits all models 1969 to 1989.
Porsche 911 1969-89
Porsche 912
Porsche 914 1970-76
Fits to No. 14 on the diagram
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-401
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1969 - 1989
Porsche 914 1970 - 1976
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91434102302
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1969 - 1989
Porsche 914 1970 - 1976
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91434102302
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1969-89
Porsche 912 1969
Porsche 911 (930) Turbo 1975-89
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 13
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90004000801
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold as a pair (both arms)
Fits:
Porsche 911/911S 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-1402BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Sold as a pair (both arms)
Fits:
Porsche 911/911S 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-1402H
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
SET OF 4 One set per car. 85 Shore rating
Fit:
Porsche 911 / 930 1969-89
Porsche 914 1970-76
High Density bushings for Porsche 911 and 914 front A-Arms are a direct replacement for your old rubber bushings. Eliminate steering slop brought on by 40+ year old rubber and improve suspension geometry under all conditions with our 25% stiffer HD bushings. Due to the large surface area inherent in the design of the 911 and 914 torsion bar based control arms these are particularly important to achieving your car's potential both on and off the track. Sold as a complete set and machined out of a tougher rubber compound, these are the perfect compliment for any street or track setup.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91134190100
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold as a pair (both arms)
Fits:
Porsche 911/911S 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-1402
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Sold as a pair (both arms)
OEM Part Number: 91434142200, 91434142201
Fits:
Porsche 911/911S 1965-1967
Porsche 912 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-1401
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
1 kit required per car
Fits:
Porsche 911 SWB - 1965 to 1968
Porsche 911 - 1969 to 1989
Porsche 930 turbo - 1975 to 1989
Porsche 912 - 1965 to 1976
Porsche 914 - 1970 to 1976
This brake cooling kit uses the forward motion of the car to direct a stream of cooling air onto the front rotors. This helps prevent brake fade when the car is driven hard.
Porsche began including front brake cooling air diverters on all the 911 series cars beginning 1990 and continuing through the current models. The reason is simple; they are simple and effective.
Our kit is a simple bolt-on solution that attaches to 911, 912, 930, and 914 front control arms. It holds 993 type diverters in the air stream beneath the car.
The kit includes Elephant Racing brake duct brackets, hardware, and genuine Porsche 993 brake ducts
Includes two air ducts, four brackets, and all hardware.
This is a complete bolt-on kit.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2190001
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
套件包括: 4 个橡胶衬套、2 个枢轴和安装工具。
适合:
保时捷 914 1970-76
橡胶拖臂衬套现以 DIY 套件形式提供。除了一套完整的 4 个 OEM 规格橡胶衬套和两个新枢轴外,该套件还包括我们专有的安装工具(正在申请专利)和安装成功所必需的说明。使用管夹或车间压机完成安装。
恢复驾驶和性能
如果您想以零维护解决方案恢复出厂时的行驶和性能,橡胶是最佳选择。请查看我们的 PolyBronze 轴承,获得高性能解决方案。
下载详细安装说明
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2290002
您正在查看的产品与这些编号存在交叉引用关系
- 我们目前无法提供该产品的配件细节。请联系我们获取更多信息。
Our GT3 front suspension delivers superior grip and ride quality.
We've adapted our 997 GT3 control arms to fit early '65-'89 911 and '70-'76 914. The system includes a complete subframe and replaces the stock crossmember, control arms, mounts, bushings and ball joints. Built from aircraft grade aluminum, the system is about half the weight of the replaced components.
Ease of adjustment
Easily adjust camber, caster and even track width.
Left and right threaded double adjusters are provisioned on the control and caster arms to provide for easy length adjustment without disconnecting the member.
Low friction, spherical action
Low friction allows the suspension to follow road/track irregularities smoothly, keeping tire contact patches stable. Ride and performance are greatly improved.
Pivot points are precision spherical heim joints, oversized for strength and durability. Spherical heim joints move freely with very low friction, yet precisely position suspension members to maintain alignment settings with zero deflection under load. Lack of deflection makes the car predictable and easier to drive fast, reducing need for constant corrections by the driver.
Spherical action of the heim joints self aligns continuously, ensuring smooth non-binding action even when the chassis is flexing under load.
Weathersealed
Heim and ball joints are completely sealed to keep out contaminants and water. The result is a extended life and a robust system suitable for street or track use.
Improved Geometry and subframe
Control arms are longer than stock to provide a improved camber curve and grip when cornering. Front pickup point is similarly moved inboard to maintain a stable caster curve.
Our GT3 subframe includes longitudinal members that connect the front mounts back to the crossmember. This provides a proper load path to transfer the considerable braking forces from the front mounts back to the crossmember. This mimics the braking load path of the factory 935 arms and product control arms.
Braking loads are thus fed into the chassis at the crossmember, as intended by the factory.
Fit and finish
Attention to detail stands out. From the quality of the machine work to the hard anodize finish that is both attractive and scratch resistant. Stressed threads are heli-coiled for strength. Heim joints are replaceable and sealed for durability.
The system readily bolts onto your existing chassis, no drilling or welding required – installation is completely reversible.
You can buy spare control arms if they need replacing. Part number 2180016-SA
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2180010
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Price is for each.
Fits:
Porsche 911/911S 1965-1967
Porsche 912 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91434142201
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Price is for each.
Fits:
Porsche 911/911S 1965-1967
Porsche 912 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91434142201
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Sold as a pair (both arms)
OEM Part Number: 91434142200, 91434142201
Fits:
Porsche 911/911S 1965-1967
Porsche 912 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-1401BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Sold as a pair (both arms)
OEM Part Number: 91434142200, 91434142201
Fits:
Porsche 911/911S 1965-1967
Porsche 912 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Powerflex Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-1401H
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
OE reference number 90134104303
Fits:
Porsche 911 1965-67
Porsche 912 1965-67
Click 'Zoom in' for large parts diagram.
Diagram ref no 6
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90134104303
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits:
Porsche 911 1968
Porsche 912 1968
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
90134100
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits:
Porsche 911 - 1969 to 1973
Porsche 914/6 - 1970 to 1976
Click 'Zoom in' to see the diagram.
Diagram Ref No 12.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91134190
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 1969-73
Porsche 914-6 1970-76
Click 'Zoom in' to see the diagram.
Diagram Ref No 12.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91134190
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 - 1974 to 1989
Click 'Zoom in' to see the diagram.
Diagram Ref No 14
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
91134190
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50