前侧车顶支架
For use with Rennline 964/993 Camber Plates and Monoball Strut Mounts
Bushing Kits for use with Rennline 964/993 Camber Plates and Monoball Strut Mounts. Kit is available in m12 or m14 sizes and includes 2 flat spacer bushings and 4 stepped bushings. These are replacement bushings which are only needed when swapping to struts with a different shaft diameter (These are included with the 964/993 front and rear upper monoball/camber plates).
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
SET OF 2.
Fits:
Porsche 964 / 993*
* For cars with factory Boge shocks please call for fitment details.
** For 993's with factory strut mounts, longer strut mount bolts (m8x25mm) are required. Fits Bilstein PSS9/10 Kits, KW suspension and Ohlins suspension by drilling the centre bearing a little larger.
Camber Plates/Strut Mounts - Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire’s contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Sealed camber plates incorporate motorsports Teflon-lined spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts.
- Drastically increased bearing life due to the integrated factory GT3 weather seals.
- Motorsports Teflon-lined spherical bearings.
- Rigid bearing mount, not clipped in like some products available.
- Can be used with all factory and aftermarket struts, Including factory non adjustable units.
- Longer stud lengths to allow for easy installation of strut bar.
- Fully rebuild-able
- CNC machined 6061 anodized aluminium construction with stainless steel hardware.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
3602509641
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
Sold per kit, 1 kit req'd per car.
Extend the range of camber adjustment and dial in your desired settings with ease.
These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Fits:
Porsche 964 1990-94 / 993 1995-98 Front camber plate 14mm spacers
Fully Weather Sealed:
We've designed in weather seals on the top and bottom to keep dirt out and extend product life. This is the only camber plate suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
This camber plate is intended to be used with a non-factory upper spring perch and spring. This kit is suited to work perfectly with Von Coilover systems or other similar solutions.
Please note: please contact us if you wish to use this camber plate kit in conjunction with factory or lowering springs.
Ease of Camber Adjustment
Indices on the camber plate allow measured changes without setup tools.
Extended Caster
These plates deliver the same caster as the 993 for enhance camber gain when turning.
Improved Shock / Coilover Performance
Spherical bearings further improve performance. The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons;
– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2152202
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Fits:
Porsche 964 / 993*
* For cars with factory Boge shocks please call for fitment details.
** For 993's with factory strut mounts, longer strut mount bolts (m8x25mm) are required.
** For cars with KW CLUBSPORT struts, select the KW drop drown as it includes alternate hardware required for installation.
Camber Plates/Strut Mounts - Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tires contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennlines Sealed camber plates incorporate FK motorsports Teflon-lined spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts. Why are Rennlines strut mounts the best ?
• Drastically increased bearing life due to the integrated factory GT3 weather seals.
• FK Motorsports Teflon-lined spherical bearings.
• Rigid bearing mount, not clipped in like some products available.
• Can be used with all factory and aftermarket struts, Including factory non adjustable units. Call for details.
• Longer stud lengths to allow for easy installation of strut bar.
• Fully rebuildable
• CNC machined 6061 anodized aluminum construction with stainless steel hardware.
• Available for front and rear
*Strut brace not included but is available separately.
For fitting information about this product Click Here
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SB676974
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
使用高性能顶部支架增强您的保时捷悬架:技术规格和优势
高性能悬挂顶部支架的技术规格:
- 性能悬架上支座(也称为支柱支座或轴承板)是将悬架支柱连接到保时捷底盘的部件。
- 它们通常由铝合金或增强橡胶等高质量材料制成。
- 与标准支架相比,性能顶部支架具有更坚固的结构和改进的设计,从而提供了增强的性能和耐用性。
- 它们具有多种设计和选项,以适合不同的保时捷车型和悬架设置。
- 性能悬架上支架可作为保时捷车辆的售后升级或标准替换件。
升级或更换保时捷性能悬架顶部支架的好处:
改善操纵性和稳定性:性能顶部支架提供更高的刚度和精度,增强车辆在转弯和高速操纵时的操纵特性和整体稳定性。
增强的悬架反馈:升级到性能支架可改善悬架反馈,使驾驶员能够更好地感知和响应道路状况,从而带来更具吸引力的驾驶体验。
降低噪音、振动和声振粗糙度 (NVH):更坚固的顶部支架有助于最大限度地减少传输到底盘的不必要的振动和噪音,从而带来更平稳、更舒适的乘坐体验。
增强的悬架几何结构:性能顶部支架可进行精确的校准调整,优化悬架几何结构,从而改善轮胎磨损、牵引力和转弯性能。
提高耐用性:性能顶部支架旨在承受更高的负载,与标准支架相比,耐用性更高,即使在苛刻的驾驶条件下也能确保长使用寿命。
在 Design911,我们专门为您的保时捷提供合适的零件和专业建议。我们提供专为保时捷车型设计的各种高性能悬架上支架,包括售后升级和 OEM 更换。我们知识渊博的团队可以根据您的保时捷车型、年份和特定的悬架要求帮助您选择合适的上支架。我们了解在性能和舒适性之间找到适当平衡的重要性,我们可以指导您选择最适合您需求的最佳上支架。凭借我们的专业知识和对客户满意度的承诺,我们可以帮助您提升保时捷的悬架性能、操控性和整体驾驶体验。立即联系我们,享受我们的全面支持并获得根据您的要求量身定制的高质量零件。
- 支撑架
- 防侧翻稳定杆
- 运动弹簧
- 前控制臂
- 后控制臂
- 前悬挂连接杆
- 后悬挂连接杆
- 发动机支架
- 变速箱座
- 后侧车顶支架
- 转向横拉杆
- 前副车架
- 后副车架
- 气动升降系统
- 防翻架
- DesignTek D220 避震悬架套件
- Bilstein SPORT B6 减震器
- Bilstein SPRINT B8 减震器
- Bilstein B12 调校悬架套件
- Bilstein B14 PSS 避震悬架套件
- Bilstein B16 PSS9/10 高度减震可调避震悬架套件
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins 道路及赛道悬架
- Koni 运动系列
- Koni Special Active 系列
- SuperPro 聚氨酯衬套
- Powerflex 聚氨酯衬套
- Powerflex 黑色系列衬套
- Powerflex 传统系列
- H&R 可调悬架套件
- H&R Cup-Kit 系列运动悬架
- KW 变体 1 Inox 悬架套件
- KW 变体 2 Inox 可调回弹减震悬架
- KW 变体 3 Inox 可调悬架套件
- KW Clubsport 避震悬架套件
- KW Clubsport 避震悬架套件(带车顶支架)
- Sachs 高性能悬架 CSS
- Nitron 汽车系列