Wössner 煅造活塞套件
按车型类型筛选
Wössner forged piston kit. Porsche 997 (911) C2 and C4
代码: K9468
Wössner forged piston kit.
Fits:
Porsche 997.1 (911) 3.6 C2 & C4
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9468
Engine Type: M96.05
OE Bore Size: 96.00mm
Bore Sizes Available:
- 96.00mm - 3824.21, Compression Ratio: 11.3:1
- 96.50mm - 3862.93, Compression Ratio: 11.4:1
Bore Size 96.00mm
Piston Size:
Over Size: 0mm
Displacement CC:
Dome / Bowl Volume:
Wössner Comp Ratio: 11.3:1
Ring Part Number: 960XSY-3
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 96.50mm
Piston Size:
Over Size: 0.5mm
Displacement CC:
Dome / Bowl Volume:
Wössner Comp Ratio: 11.4:1
Ring Part Number: 965XSY-3
Please note, pistons not suitable for Alusil or Lokasil coated bores
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Fits:
Porsche 997.1 (911) 3.6 C2 & C4
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9468
Engine Type: M96.05
OE Bore Size: 96.00mm
Bore Sizes Available:
- 96.00mm - 3824.21, Compression Ratio: 11.3:1
- 96.50mm - 3862.93, Compression Ratio: 11.4:1
Bore Size 96.00mm
Piston Size:
Over Size: 0mm
Displacement CC:
Dome / Bowl Volume:
Wössner Comp Ratio: 11.3:1
Ring Part Number: 960XSY-3
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 96.50mm
Piston Size:
Over Size: 0.5mm
Displacement CC:
Dome / Bowl Volume:
Wössner Comp Ratio: 11.4:1
Ring Part Number: 965XSY-3
Please note, pistons not suitable for Alusil or Lokasil coated bores
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
产品车辆组
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
价格低至: €1,430.46 含 VAT
Wössner forged piston kit. Porsche 997 (911) Carrera S & 4S 3.8L 24v
代码: K9474
Wössner forged piston kit.
Fits:
Porsche 997 (911) Carrera S & 4S 3.8L 24v
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9474
Engine Type: M97.01
OE Bore Size: 99.00mm
Bore Sizes Available:
- 99.00mm - 3824.21, Compression Ratio: 11.8:1
- 99.50mm - 3862.93, Compression Ratio: 11.9:1
- 100.00mm - 3901.85, Compression Ratio: 12.0:1
Bore Size 99.00mm
Piston Size: 98.93mm
Over Size: 0mm
Displacement CC: 3824cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 11.8:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 99.50mm
Piston Size: 99.43mm
Over Size: 0.5mm
Displacement CC: 3862cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 11.9:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 100.00mm
Piston Size: 99.93mm
Over Size: 1mm
Displacement CC: 3901cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 12.0:1
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 82.8mm
Dome/Bowl Volume: -13.8cc
OE Comp. Ratio: 11.8:1
Comp. Height : 33mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
K9474
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 997 (911) Carrera S & 4S 3.8L 24v
Please note, pistons not suitable for Alusil or Lokasil coated bores
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wössner's latest catalogue:
Part Number: K9474
Engine Type: M97.01
OE Bore Size: 99.00mm
Bore Sizes Available:
- 99.00mm - 3824.21, Compression Ratio: 11.8:1
- 99.50mm - 3862.93, Compression Ratio: 11.9:1
- 100.00mm - 3901.85, Compression Ratio: 12.0:1
Bore Size 99.00mm
Piston Size: 98.93mm
Over Size: 0mm
Displacement CC: 3824cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 11.8:1
Ring Part Number: 960XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 99.50mm
Piston Size: 99.43mm
Over Size: 0.5mm
Displacement CC: 3862cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 11.9:1
Ring Part Number: 965XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Bore Size 100.00mm
Piston Size: 99.93mm
Over Size: 1mm
Displacement CC: 3901cc
Dome / Bowl Volume: 13.8cc
Wössner Comp Ratio: 12.0:1
Ring Part Number: 970XPY
Please note, pistons not suitable for Alusil or Lokasil coated bores
Standard
Stroke: 82.8mm
Dome/Bowl Volume: -13.8cc
OE Comp. Ratio: 11.8:1
Comp. Height : 33mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
K9474
99710303028
99710303030
99710303031
503PI0010000000
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
价格低至: €1,430.46 含 VAT
Wössner Forged Piston Kit. Porsche 997 GT3 RS 3.8L 24v 2006- (415PS)
代码: K9268D200
Wössner Forged Piston Kit for Porsche 997 GT3 RS 3.8 24v 2006- (415PS)
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wossner's latest catalogue:
Part Number: K9268
Engine Type: -
OE Bore Size: 100.00mm
Bore Sizes Available:
- 102.00mm - 3745.71cc
Stroke: 76.4mm
Dome/Bowl Volume: +0.82cc
Wössner Comp. Ratio: 12.7:1
OE Comp. Ratio: 12.0:1
Comp. Height : 30.10mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
Suitable to use with Nikasil liners.
Specification
Technical information is sourced from Wossner's latest catalogue:
Part Number: K9268
Engine Type: -
OE Bore Size: 100.00mm
Bore Sizes Available:
- 102.00mm - 3745.71cc
Stroke: 76.4mm
Dome/Bowl Volume: +0.82cc
Wössner Comp. Ratio: 12.7:1
OE Comp. Ratio: 12.0:1
Comp. Height : 30.10mm
Valves Per Cylinder: 4
Cylinders: 6
Please CLICK HERE for Technical release – Piston / Con rod
orientation.
Wössner are regarded by Europe's leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duress's of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent "hot spots" on piston crowns. Price includes all piston rings and gudgeon pins.
Price shown is for complete engine set.
产品车辆组
- Porsche 997 GT3 2007>>
€1,459.65 含 VAT
当前 €1,430.46 含 VAT
由供应商供货
显示从1到3(共3个产品)
也可在这些页面找到
您可能也喜欢
- 发动机改装及升级
- 电子燃油喷射节气门套件
- ECU 重映射(自装式)
- 电子节气门增压器
- IRIDIUM POWER 火花塞
- IRIDIUM RACING 火花塞
- 等离子直接点火线圈
- 高流量空气滤清器
- 进气口套件
- 硅胶软管/套件
- 分流阀
- 短变速杆套件
- 中冷器
- 涡轮增压器
- 高性能增压室
- ECU 读取器/故障排查器
- 高流量 Y 型管
- 排气套件
- 增压器套件
- 燃油添加剂
- 踏板/地板/赛道地垫 左侧驾驶汽车
- 踏板/地板/赛道地垫 右侧驾驶汽车
- 灭火器座
- Brey-Krause 灭火器座
- 拖车孔钩及牵引绳
- 合金挡板
- 离合器/飞轮/液压装置
- 赛道及赛车用冷却液散热器
- CP Carrillo 连杆
- Capricorn 发动机零部件
- Goodridge 不锈钢制动软管
流行车型